
BS EN ISO 3126:2005
Current
The latest, up-to-date edition.

Plastics piping systems. Plastics components. Determination of dimensions
Hardcopy , PDF
English
31-07-2006
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
3.1 Terms and definitions
3.2 Symbols
4 Measuring devices
4.1 General requirements
4.2 Instruments
5 Determination of dimensions
5.1 General
5.2 Wall thicknesses
5.3 Diameters
5.4 Out-of-roundness
5.5 Pipe lengths
5.6 End squareness of pipes and fittings
6 Determination of other geometrical characteristics
related to fittings
6.1 General
6.2 Bends
6.3 Branches
6.4 Reducers
7 Flanges, loose flanges and collar
7.1 General
7.2 Outside diameter of the flange, loose flange and collar
7.3 Bore diameter of the flange or collar
7.4 Bolt hole diameter
7.5 Bolt hole distribution
7.6 Concentricity of bolt circle diameter
7.7 Pitch circle diameter
7.8 Shoulder diameter of flange and collar
7.9 Flange and collar thickness
7.10 Length of the flange and collar
8 Other measurements
Bibliography
Provides methods for measurement and/or determination of the dimensions of plastics pipes and fittings and the accuracy of the measurement. Specifies procedures for measuring angles, diameters, lengths, squareness and wall thicknesses for the purposes of checking conformity to geometric limits.
Committee |
PRI/88
|
DevelopmentNote |
Supersedes BS 2782-11.1101A(1981) & 99/121962 DC. (07/2006)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This document specifies methods for measurement and/or determination of the dimensions of plastics pipes and fittings and the accuracy of the measurement.
It specifies procedures for measuring angles, diameters, lengths, squareness and wall thicknesses for the purposes of checking conformity to geometric limits.
NOTE This document is using metric units. However the procedures and tolerances are applicable to other units by using appropriate conversion factors.
Standards | Relationship |
SN EN ISO 3126 : 2005 | Identical |
NEN EN ISO 3126 : 2005 | Identical |
I.S. EN ISO 3126:2005 | Identical |
ISO 3126:2005 | Identical |
NBN EN ISO 3126 : 2005 | Identical |
NS EN ISO 3126 : 1ED 2005 | Identical |
UNI EN ISO 3126 : 2005 | Identical |
UNE-EN ISO 3126:2005 | Identical |
NF EN ISO 3126 : 2005 | Identical |
EN ISO 3126:2005 | Identical |
DIN EN ISO 3126:2005-05 | Identical |
BS 8588:2017 | Polyethylene pressure pipe with an aluminium barrier layer and associated fittings for potable water supply in contaminated land. Size 20 mm to 630 mm |
BS 7291-2:2010 | Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings Specification for polybutylene (PB) pipe and associated fittings |
16/30340367 DC : 0 | BS 8588 - POLYEPTRHEYSLSEUNREE PIPES WITH AN ALUMINIUM BARRIER LAYER AND ASSOCIATED FITTINGS FOR POTABLE WATER SUPPLY IN CONTAMINATED LAND - SIZE 20 MM TO 630 MM |
BS 7291-3:2010 | Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings Specification for crosslinked polyethylene (PE-X) pipes and associated fittings |
BS 5391-1:2006 | Acrylonitrile-butadiene-styrene (ABS) pressure pipe Specification |
BS 5392-1:2006 | Acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe Specification |
BS 7291-1:2010 | Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings General requirements |
09/30208674 DC : 0 | BS 7291-1 - THERMOPLASTICS PIPE AND FITTING SYSTEMS FOR HOT AND COLD WATER FOR DOMESTIC PURPOSES AND HEATING INSTALLATIONS IN BUILDINGS - PART 1: GENERAL REQUIREMENTS |
09/30208678 DC : 0 | BS 7291-3 - THERMOPLASTICS PIPES AND ASSOCIATED FITTINGS FOR HOT AND COLD WATER FOR DOMESTIC PURPOSES AND HEATING INSTALLATIONS IN BUILDINGS - PART 3: SPECIFICATION FOR CROSS-LINKED POLYETHYLENE (PE-X) PIPES AND ASSOCIATED FITTINGS |
09/30208676 DC : 0 | BS 7291-2 - THERMOPLASTICS PIPES AND ASSOCIATED FITTINGS FOR HOT AND COLD WATER FOR DOMESTIC PURPOSES AND HEATING INSTALLATIONS IN BUILDINGS - PART 2: SPECIFICATION FOR POLYBUTYLENE (PB) PIPES AND ASSOCIATED FITTINGS |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
ISO 3599:1976 | Vernier callipers reading to 0,1 and 0,05 mm |
ISO 3611:2010 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics |
ISO/R 463:1965 | Dial gauges reading in 0.01 mm, 0.001 in and 0.0001 in |
ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.