BS EN ISO 4589-2:2017
Current
The latest, up-to-date edition.
Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test
Hardcopy , PDF
English
07-06-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
PRI/26
|
| DevelopmentNote |
Renumbers and supersedes BS ISO 4589-2. 1999 Version incorporates amendment 10627 to BS ISO 4589-2. Supersedes BS 2782-1.141(1986) and 92/46504 DC. (10/2005) Supersedes 16/30319043 DC. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This document specifies methods for determining the minimum volume fraction of oxygen, in admixture with nitrogen, that will support combustion of small vertical test specimens under specified test conditions. The results are defined as oxygen index (OI) values.
Methods are provided for testing materials that are self-supporting in the form of vertical bars or sheets up to 10,5 mm thick. These methods are suitable for solid, laminated or cellular materials characterized by an apparent density 100kg/m3 or greater. The methods might also be applicable to some cellular materials having an apparent density of less than 100kg/m3. A method is provided for testing flexible sheets or film materials while supported vertically.
For comparative purposes, a procedure is provided for determining whether or not the OI of a material lies above some specified minimum value.
NOTE It might not be possible to apply these methods satisfactorily to materials that exhibit high levels of shrinkage when heated, e.g. highly oriented thin film.
| Standards | Relationship |
| I.S. EN ISO 4589-2:2017 | Identical |
| ISO 4589-2:2017 | Identical |
| DIN EN ISO 4589-2:2016-03 (Draft) | Identical |
| EN ISO 4589-2:2017 | Identical |
| UNI EN ISO 4589-2 : 2008 | Identical |
| NBN EN ISO 4589-2 : 1999 AMD 1 2006 | Identical |
| NEN EN ISO 4589-2 : 2017 | Identical |
| NS EN ISO 4589-2 : 2017 | Identical |
| UNE-EN ISO 4589-2:2017 | Identical |
| NF EN ISO 4589-2 : 2017 | Identical |
| SN EN ISO 4589-2 : 2017 | Identical |
| DEFSTAN 61-12(PT0)/3(2011) : 2011 | WIRES, CORDS AND CABLES ELECTRICAL METRIC UNITS - PART 0: GENERAL REQUIREMENTS AND TEST METHODS GENERIC SPECIFICATION |
| DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| BS 8499:2017 | Specification for domestic gas meter boxes and meter bracket |
| DEFSTAN 02-137/2(2007) : 2007 | REQUIREMENTS FOR FOAM COMPONENTS FOR CUSHIONS AND UPHOLSTERY |
| DEFSTAN 02-165/2(2010) : 2010 | REQUIREMENTS FOR SPRING INTERIOR MATTRESSES FOR USE IN SURFACE SHIPS AND SUBMARINES |
| BS 8499:2009 | Specification for domestic gas meter boxes and meter bracket |
| DEFSTAN 02-167/3(2007) : 2007 | REQUIREMENTS FOR RESIN FOR USE IN SHIPS, BOATS, CRAFT AND CRAFT STRUCTURES |
| DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 02-102(PT1)/3(2005) : 2005 | REQUIREMENTS FOR AIR-CONDITIONING AND VENTILATION - PART 1: HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES |
| DEFSTAN 02-129/2(2007) : 2007 | REQUIREMENTS FOR SOFT FURNISHINGS AND UPHOLSTERY FABRICS |
| DEFSTAN 02-805/1(2010) : 2010 | REQUIREMENTS FOR VAPOUR BARRIER COATINGS AND PROPRIETARY FLEXIBLE MASTIC SEALERS FOR USE ON INSULATION MATERIALS |
| DEFSTAN 02-804/1(2008) : 2008 | REQUIREMENTS FOR CORK PRODUCTS FOR THERMAL INSULATION |
| DEFSTAN 02-803/2(2015) : 2015 | REQUIREMENTS FOR POLYMER FOAMS FOR THERMAL INSULATION |
| 10/30237345 DC : DRAFT DEC 2010 | BS 6853 AMD2 - CODE OF PRACTICE FOR FIRE PRECAUTIONS IN THE DESIGN AND CONSTRUCTION OF PASSENGER CARRYING TRAINS |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 02-802/1(2008) : 2008 | REQUIREMENTS FOR MINERAL WOOL PRODUCTS FOR ACOUSTIC AND THERMAL INSULATION |
| DEFSTAN 02-167/2(2004) : 2004 | REQUIREMENT FOR RESIN FOR USE IN SHIPS, BOATS, CRAFT AND CRAFT STRUCTURES |
| DEFSTAN 02-804/2(2015) : 2015 | REQUIREMENTS FOR CORK PRODUCTS FOR THERMAL INSULATION |
| DEFSTAN 02-806/2(2010) : 2010 | REQUIREMENTS FOR CERAMIC PRODUCTS FOR THERMAL INSULATION APPLICATIONS: CERAMIC ROPE AND CERAMIC BLANKET |
| DEFSTAN 02-167/4(2011) : 2011 | REQUIREMENT FOR RESIN FOR USE IN SHIPS, BOATS, CRAFT AND CRAFT STRUCTURES |
| DEFSTAN 02-345/2(2013) : 2013 | REQUIREMENTS FOR FLEXIBLE RUBBER PIPE ASSEMBLIES AND BELLOWS FOR USE IN SYSTEMS FROM VACUUM TO 20 BAR |
| DEFSTAN 02-803/1(2010) : 2010 | REQUIREMENTS FOR POLYMER FOAMS FOR THERMAL INSULATION |
| DEFSTAN 02-851/2(2007) : 2007 | REQUIREMENTS FOR CARPETS - TUFTED CONSTRUCTION |
| DEFSTAN 07-247(PT1)/3(2009) : 2009 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
| DEFSTAN 07-247(PT1)/2(2006) : 2006 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
| DEFSTAN 02-802/2(2015) : 2015 | REQUIREMENTS FOR MINERAL WOOL PRODUCTS FOR ACOUSTIC AND THERMAL INSULATION |
| 09/30160438 DC : DRAFT JAN 2009 | BS 8499 - SPECIFICATION FOR DOMESTIC GAS METER BOXES AND METER BRACKET |
| DEFSTAN 02-900(PT0)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 02-900(PT0)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| ISO 3582:2000 | Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
| ISO 294:1995 | Plastics Injection moulding of test specimens of thermoplastic materials |
| ISO 13943:2017 | Fire safety — Vocabulary |
| ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 4589-1:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.