BS EN ISO 7391-2:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties
Hardcopy , PDF
25-03-2019
English
27-03-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Conformance
3 Normative references
4 Preparation of test specimens
4.1 General
4.2 Treatment of the material before moulding
4.3 Injection moulding
4.4 Compression
5 Conditioning of test specimens
6 Determination of properties
Specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polycarbonate moulding and extrusion materials.
| Committee |
PRI/82
|
| DevelopmentNote |
Renumbers and supersedes BS ISO 7391-2 2000 Version incorporates amendment 10746 to BS ISO 7391-2 Supersedes 95/123277 DC (06/2005) Supersedes 03/118818 DC (04/2006) Reviewed and confirmed by BSI, November 2015. (11/2015)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN ISO 7391-2 : 2006 | Identical |
| NEN EN ISO 7391-2 : 2006 | Identical |
| ISO 7391-2:2006 | Identical |
| UNI EN ISO 7391-2 : 2006 | Identical |
| NS EN ISO 7391-2 : 2ED 2006 | Identical |
| SN EN ISO 7391-2 : 2006 | Identical |
| I.S. EN ISO 7391-2:2006 | Identical |
| EN ISO 7391-2:2006 | Identical |
| ONORM EN ISO 7391-2 : 2006 | Identical |
| UNE-EN ISO 7391-2:2006 | Identical |
| NBN EN ISO 7391-2 : 2006 | Identical |
| DIN EN ISO 7391-2:2006-06 | Identical |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
| ISO 10350-1:2017 | Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials |
| ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 62:2008 | Plastics Determination of water absorption |
| ISO 7391-1:2006 | Plastics Polycarbonate (PC) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 294-1:2017 | Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 1628-4:1999 | Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials |
| ISO 899-1:2017 | Plastics — Determination of creep behaviour — Part 1: Tensile creep |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.