![header thumbnail](/images/publishers\bsi_cover.gif)
BS ISO 11999-1:2015
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\bsi_cover.gif)
PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures General
Hardcopy , PDF
English
30-06-2015
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms and subscripts
5 Design and performance requirements for PPE
items and ensembles
6 Marking
7 Manufacturer's instructions to be supplied with
each item of PPE
8 Information available upon request from the supplier
of a combination of items of PPE or of an ensemble
Annex A (informative) - Information on risk assessment
Annex B (normative) - Testing and classification of performance
for items of PPE, for combinations of items of PPE, and
for ensembles
Bibliography
Defines minimum design and performance requirements for personal protective equipment (PPE) to be used by firefighters, primarily but not solely to protect against exposure to flame and high thermal loads.
Committee |
PH/14
|
DocumentType |
Standard
|
Pages |
48
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Standards | Relationship |
ISO 11999-1:2015 | Identical |
ISO 13287:2012 | Personal protective equipment Footwear Test method for slip resistance |
EN 14458:2004 | Personal eye-equipment - Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
ISO 9073-4:1997 | Textiles Test methods for nonwovens Part 4: Determination of tear resistance |
ISO 17492:2003 | Clothing for protection against heat and flame Determination of heat transmission on exposure to both flame and radiant heat |
EN 458:2016 | Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document |
EN 13087-6:2012 | Protective helmets - Test methods - Part 6: Field of vision |
ISO 16073:2011 | Wildland firefighting personal protective equipment Requirements and test methods |
BS 8469:2007 | Personal protective equipment for firefighters. Assessment of ergonomic performance and compatibility. Requirements and test methods |
ISO 11612:2015 | Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements |
ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
EN 168:2001 | Personal eye-protection - Non-optical test methods |
EN 13087-5:2012 | Protective helmets - Test methods - Part 5: Retention system strength |
ISO 13688:2013 | Protective clothing — General requirements |
EN 1149-1:2006 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
IEC 61482-2:2009 | Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements |
ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
IEC 61482-1-2:2014 | Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) |
ISO 9151:2016 | Protective clothing against heat and flame Determination of heat transmission on exposure to flame |
EN 13087-2:2012 | Protective helmets - Test methods - Part 2: Shock absorption |
ISO 2023:1994 | Rubber footwear Lined industrial vulcanized-rubber boots Specification |
EN 13087-3:2000/A1:2001 | PROTECTIVE HELMETS - TEST METHODS - RESISTANCE TO PENETRATION |
EN 13087-1:2000/A1:2001 | PROTECTIVE HELMETS - TEST METHODS - PART 1: CONDITIONS AND CONDITIONING |
ISO 15538:2001 | Protective clothing for firefighters — Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
IEC 61482-1-1:2009 | Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1: Determination of the arc rating (ATPV or E<sub>BT50</sub>) of flame resistant materials for clothing |
EN 136:1998/AC:2003 | RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
ISO 3175-1:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 1: Assessment of performance after cleaning and finishing |
ISO/TR 11610:2004 | Protective clothing — Vocabulary |
ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
ISO 13997:1999 | Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects |
ISO 4869:1981 | Acoustics Measurement of sound attenuation of hearing protectors Subjective method |
ISO/TS 16976-1:2015 | Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates |
EN 13832-3:2006 | Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
ISO 3377-2:2016 | Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear |
ISO 15384:2003 | Protective clothing for firefighters Laboratory test methods and performance requirements for wildland firefighting clothing |
ISO 11999-3:2015 | PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 3: Clothing |
ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
EN 166:2001 | Personal eye-protection - Specifications |
ISO 16604:2004 | Clothing for protection against contact with blood and body fluids Determination of resistance of protective clothing materials to penetration by blood-borne pathogens Test method using Phi-X 174 bacteriophage |
EN 167:2001 | Personal eye-protection - Optical test methods |
EN 50321:1999 | Electrically insulating footwear for working on low voltage installations |
EN 13087-8:2000/A1:2005 | PROTECTIVE HELMETS - TEST METHODS - PART 8: ELECTRICAL PROPERTIES |
ISO 20471:2013 | High visibility clothing — Test methods and requirements |
EN 469:2005/A1:2006 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
EN 171:2002 | Personal eye-protection - Infrared filters - Transmittance requirements and recommended use |
ISO 811:1981 | Textile fabrics Determination of resistance to water penetration Hydrostatic pressure test |
NFPA 197 : 2018 | Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting |
ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
EN 13911:2017 | Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters |
ISO/TR 21808:2009 | Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters |
EN 443:2008 | Helmets for fire fighting in buildings and other structures |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
EN 137:2006 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
EN 960:2006 | Headforms for use in the testing of protective helmets |
EN 170:2002 | Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use |
ISO 20345:2011 | Personal protective equipment Safety footwear |
ISO 17075:2007 | Leather Chemical tests Determination of chromium(VI) content |
EN 13087-4:2012 | Protective helmets - Test methods - Part 4: Retention system effectiveness |
ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
ISO 17491-5:2013 | Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test) |
EN 13087-10:2012 | Protective helmets - Test methods - Part 10: Resistance to radiant heat |
EN 1149-5:2008 | Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
EN 172:1994/A2:2001 | PERSONAL EYE PROTECTION - SUNGLARE FILTERS FOR INDUSTRIAL USE |
ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
ISO 13996:1999 | Protective clothing Mechanical properties Determination of resistance to puncture |
ISO 13994:2005 | Clothing for protection against liquid chemicals — Determination of the resistance of protective clothing materials to penetration by liquids under pressure |
EN 15090:2012 | Footwear for firefighters |
NFPA 1991 : 2016 | Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies |
ISO 9185:2007 | Protective clothing — Assessment of resistance of materials to molten metal splash |
ISO 20344:2011 | Personal protective equipment Test methods for footwear |
NFPA 1981 : 2013 | OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES |
ISO 13506:2008 | Protective clothing against heat and flame Test method for complete garments Prediction of burn injury using an instrumented manikin |
EN 1149-3:2004 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.