BS ISO 15442:2012+A1:2015
Current
The latest, up-to-date edition.
Cranes. Safety requirements for loader cranes
Hardcopy , PDF
English
31-01-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
5 Verification of the safety requirements and/or measures
6 Information for use
Annex A (informative) - List of significant hazards
Annex B (informative) - Examples of configurations and
mountings
Annex C (informative) - Explanatory notes
Annex D (informative) - Examples of movements to be
prevented in event of overload
Annex E (normative) - Additional requirements for cableless
controls and control systems
Annex F (normative) - Symbols for working and setting-up
functions
Annex G (informative) - Control system - Preferred vertical
layout for controls operated from the ground
Annex H (informative) - Control systems - Horizontal
layout order
Annex I (informative) - Control levers for high seats
and remote controls
Annex J (normative) - Cabins fitted on chassis-mounted loader
cranes up to load moment of 250 kN.m
Annex K (informative) - Examples of raised control stations
Annex L (normative) - Raised control stations - Handrails and
handholds, ladders and steps
Annex M (informative) - Installation of loader cranes on chassis
Annex N (normative) - User information pertaining to noise
Annex O (informative) - Stress history parameter s and stress
history classes S
Bibliography
Describes the minimum requirements for the design, calculation, examination and testing of hydraulic powered loader cranes and their mountings onto chassis or static foundations.
| Committee |
MHE/3/5
|
| DevelopmentNote |
Supersedes 14/30310994 DC. (01/2016) Reviewed and confirmed by BSI, April 2018. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard specifies the minimum requirements for the design,calculation,examination and testing of hydraulic powered loader cranes and their mountings onto chassis or static foundations. It is applicable to all new loader cranes manufactured one year after its publication. It is not the intent of this International Standard to require the retrofitting of existing loader cranes. It is not applicable to loader cranes used on board ships or floating structures or to articulated boom system cranes designed as a total integral part of special equipment such as forwarders. It deals with all significant hazards, hazardous situations or hazardous events relevant to loader cranes, with the exception of hazards related to the lifting of persons, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. See AnnexA for a list of the significant hazards. NOTE The use of cranes for the lifting of persons may be subject to specific national regulations.
| Standards | Relationship |
| ISO 15442:2012 | Identical |
| ISO 15442:2012/Amd 1:2015 | Identical |
| ISO 11660-2:2015 | Cranes Access, guards and restraints Part 2: Mobile cranes |
| ISO 4302:2016 | Cranes — Wind load assessment |
| ISO 11660-1:2008 | Cranes — Access, guards and restraints — Part 1: General |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 15513:2000 | Cranes — Competency requirements for crane drivers (operators), slingers, signallers and assessors |
| ISO 4306-1:2007 | Cranes — Vocabulary — Part 1: General |
| ISO 4310:2009 | Cranes — Test code and procedures |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| ISO 5353:1995 | Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO 9928-1:2015 | Cranes Crane operating manual Part 1: General |
| ISO 8566-2:2016 | Cranes — Cabins and control stations — Part 2: Mobile cranes |
| ISO 12478-1:1997 | Cranes — Maintenance manual — Part 1: General |
| ISO 8566-1:2010 | Cranes Cabins and control stations Part 1: General |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| ISO 9927-1:2013 | Cranes — Inspections — Part 1: General |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 20332:2016 | Cranes Proof of competence of steel structures |
| CEN/TS 13001-3-5:2010 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 7296-2:1996 | Cranes Graphical symbols Part 2: Mobile cranes |
| IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
| ISO 8686-2:2004 | Cranes Design principles for loads and load combinations Part 2: Mobile cranes |
| ISO 7752-1:2010 | Cranes Control layout and characteristics Part 1: General principles |
| ISO 10245-1:2008 | Cranes Limiting and indicating devices Part 1: General |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 9942-1:2015 | Cranes Information labels Part 1: General |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| CEN/TS 13001-3-2:2008 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.