• IEC 60204-32:2008

    Current The latest, up-to-date edition.

    Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French, Spanish, Castilian

    Published date:  10-03-2008

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General requirements
       4.1 General considerations
       4.2 Selection of equipment
       4.3 Electrical supply
       4.4 Physical environment and operating conditions
       4.5 Transportation and storage
       4.6 Provisions for handling
       4.7 Installation
    5 Incoming supply conductor terminations and devices for
       disconnecting and switching off
       5.1 Incoming supply conductor terminations
       5.2 Terminal for connection to the external protective
            earthing system
       5.3 Supply disconnecting and switching devices
       5.4 Devices for switching off for prevention of unexpected
            start-up
       5.5 Devices for disconnecting electrical equipment
       5.6 Protection against unauthorized, inadvertent and/or
            mistaken connection
    6 Protection against electric shock
       6.1 General
       6.2 Protection against direct contact
       6.3 Protection against indirect contact
       6.4 Protection by the use of PELV
    7 Protection of equipment
       7.1 General
       7.2 Overcurrent protection
       7.3 Protection of motors against overheating
       7.4 Abnormal temperature protection
       7.5 Protection against supply interruption or voltage
            reduction and subsequent restoration
       7.6 Motor overspeed protection
       7.7 Earth fault/residual current protection
       7.8 Phase-sequence protection
       7.9 Protection against switching surges and lightning
    8 Equipotential bonding
       8.1 General
       8.2 Protective bonding circuit
       8.3 Functional bonding
       8.4 Measures to limit the effects of high leakage current
    9 Control circuits and control functions
       9.1 Control circuits
       9.2 Control functions
       9.3 Protective interlocks
       9.4 Control functions in the event of failure
    10 Operator interface and hoisting machine mounted control
       devices
       10.1 General
       10.2 Push-buttons
       10.3 Indicator lights and displays
       10.4 Illuminated push-buttons
       10.5 Rotary control devices
       10.6 Start devices
       10.7 Emergency stop devices
       10.8 Emergency switching-off devices
       10.9 Enabling control device
    11 Controlgear: location, mounting, and enclosures
       11.1 General requirements
       11.2 Location and mounting
       11.3 Degrees of protection
       11.4 Enclosures, doors and openings
       11.5 Access to switchgear and to controlgear
    12 Conductors and cables
       12.1 General requirements
       12.2 Conductors
       12.3 Insulation
       12.4 Current-carrying capacity in normal service
       12.5 Voltage drop
       12.6 Flexible cables
       12.7 Conductor wires, conductor bars and slip-ring
            assemblies
    13 Wiring practices
       13.1 Connections and routing
       13.2 Identification of conductors
       13.3 Wiring inside enclosures
       13.4 Wiring outside enclosures
       13.5 Ducts, connection boxes and other boxes
    14 Electric motors and associated equipment
       14.1 General requirements
       14.2 Motor enclosures
       14.3 Motor dimensions
       14.4 Motor mounting and compartments
       14.5 Criteria for motor selection
       14.6 Protective devices for mechanical brakes
       14.7 Electrically operated mechanical brakes
    15 Accessories and lighting
       15.1 Accessories
       15.2 Local lighting on the hoisting machine and for
            the equipment
    16 Marking, warning signs and reference designations
       16.1 General
       16.2 Warning signs
       16.3 Functional identification
       16.4 Marking of equipment
       16.5 Reference designations
    17 Documentation
       17.1 General
       17.2 Information to be provided
       17.3 Requirements applicable to all documentation
       17.4 Installation documents
       17.5 Overview diagrams and function diagrams
       17.6 Circuit diagrams
       17.7 Operating manual
       17.8 Maintenance manual
       17.9 Parts list
    18 Verification
       18.1 General
       18.2 Verification of conditions for protection by automatic
            disconnection of supply
       18.3 Insulation resistance tests
       18.4 Voltage tests
       18.5 Protection against residual voltages
       18.6 Functional tests
       18.7 Retesting
    Annex A (normative) Protection against indirect contact in
                        TN-systems
    Annex B (informative) Inquiry form for the electrical equipment
                          of hoisting machines
    Annex C (informative) Current-carrying capacity and overcurrent
                          protection of conductors and cables in the
                          electrical equipment of machines
    Annex D (informative) Conductor selection for intermittent duty
    Annex E (informative) Explanation of emergency operation functions
    Annex F (informative) Comparison of typical conductor
                          cross-sectional areas
    Bibliography
    Index

    Abstract - (Show below) - (Hide below)

    IEC 60204-32 applies to the application of electrical and electronic equipment and systems to hoisting machines and related equipment. The equipment covered by this standard commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) including systems for power supply and control feeders situated outside of the hoisting machine, for example, flexible cables or conductor wires or conductor bars. This standard is applicable to equipment or parts of equipment not exceeding 1 000 V a.c. or 1 500 V d.c. between lines and with nominal frequencies not exceeding 200 Hz. For the purposes of this standard, hoisting machines include cranes of all types, winches of all types, and storage and retrieval machines. It includes the following significant technical changes with respect to the previous edition:
    - deletion of Clause 11 of the previous edition;
    - modification of the structure of equipotential bonding (Clause 8);
    - separation of control functions (Clause 9) and devices (Clause 10);
    - structure of technical documentation (Clause 17);
    - verification of protection by automatic disconnection of supply (18.2);
    - Subclause 9.2.7 on cableless controls has been modified.

    General Product Information - (Show below) - (Hide below)

    Committee TC 44
    Development Note Stability Date: 2018. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    18/30366946 DC : 0 BS EN 17206 - ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS)
    PREN 1808 : DRAFT 2011 SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
    ISO 11660-1:2008 Cranes — Access, guards and restraints — Part 1: General
    12/30244749 DC : 0 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 12999 : 2011 CRANES - LOADER CRANES
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    04/102158 DC : 0 BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES
    13/30260860 DC : 0 BS ISO 17096 - CRANES - SAFETY - LOAD LIFTING ATTACHMENTS
    BS EN 15954-2:2013 Railway applications. Track. Trailers and associated equipment General safety requirements
    BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems General requirements
    UNI ISO 8566-1 : 2010 CRANES - CABINS AND CONTROL STATIONS - PART 1: GENERAL
    UNE-EN 16851:2017 Cranes - Light crane systems
    NF EN 16191 : 2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
    08/30190664 DC : 0 BS ISO 7752-1 - LIFTING APPLIANCES - CONTROLS - LAYOUT AND CHARACTERISTICS - PART 1: GENERAL PRINCIPLES
    16/30277591 DC : 0 BS ISO 20474-12 - EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    BS ISO 7752-3:2013 CRANES - CONTROL LAYOUT AND CHARACTERISTICS - PART 3: TOWER CRANES
    09/30187535 DC : 0 BS EN 13000 - CRANES - MOBILE CRANES
    04/30111616 DC : 0 EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
    EN 81-41:2010 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
    ISO 10972-2:2009 Cranes Requirements for mechanisms Part 2: Mobile cranes
    I.S. EN 1570-2:2016 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
    I.S. EN 13000:2010 CRANES - MOBILE CRANES
    UNE-EN 14985:2012 Cranes - Slewing jib cranes
    16/30341165 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    13/30273889 DC : 0 BS EN 16517 - AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY
    NF EN 1570-2 : 2016 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
    DIN EN 14985 E : 2012 CRANES - SLEWING JIB CRANES
    DIN EN 13135-1:2011-04 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
    DIN EN 12158-1:2011-06 Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010)
    BS EN 1493:2010 Vehicle lifts
    BS EN 13000 : 2010 CRANES - MOBILE CRANES
    15/30286010 DC : 0 BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
    14/30278953 DC : 0 BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
    BS EN 280 : 2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
    BS EN 528:2008 Rail dependent storage and retrieval equipment. Safety requirements
    EN 528:2008 Rail dependent storage and retrieval equipment - Safety requirements
    UNI EN 12158-1 : 2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    EN 13135-2:2004+A1:2010 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    EN 13557:2003+A2:2008 CRANES - CONTROLS AND CONTROL STATIONS
    14/30285286 DC : 0 BS EN 14439 - CRANES - SAFETY - TOWER CRANES
    DIN EN 15955-2:2013-09 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 81-41:2010 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Vertical lifting platforms intended for use by persons with impaired mobility
    05/30140931 DC : DRAFT OCT 2005 ISO 10972-5 - CRANES - REQUIREMENTS FOR MECHANISMS - PART 5: BRIDGE AND GANTRY CRANES
    04/19993045 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    10/30233953 DC : 0 BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
    UNI EN 81-41 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
    BS EN 81-43:2009 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Lifts for cranes
    I.S. EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    BS EN 16851:2017 Cranes. Light crane systems
    11/30234386 DC : 0 BS EN 1808 - SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
    08/30187719 DC : 0 BS EN 1493 - VEHICLE LIFTS
    EN 13000:2010+A1:2014 CRANES - MOBILE CRANES
    12/30244743 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    09/30201429 DC : 0 BS EN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATION AND TESTS
    ISO 7752-3:2013 Cranes Control layout and characteristics Part 3: Tower cranes
    PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    UNI ISO 7752-3 : 2011 CRANES - CONTROL LAYOUT AND CHARACTERISTICS - PART 3: TOWER CRANES
    ISO 17096:2015 Cranes Safety Load lifting attachments
    I.S. EN 12999:2011 CRANES - LOADER CRANES
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    16/30328759 DC : 0 BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
    I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 15955-2:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    PREN 17206 : DRAFT 2018 ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS)
    ISO 11660-5:2001 Cranes — Access, guards and restraints — Part 5: Bridge and gantry cranes
    DIN EN 12999:2013-02 CRANES - LOADER CRANES
    ISO 10972-3:2003 Cranes Requirements for mechanisms Part 3: Tower cranes
    EN 12999:2011+A2:2018 CRANES - LOADER CRANES
    UNI EN 81-43 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
    I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    S.R. CWA 15902-1:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
    IEC 60204-33:2009 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
    ISO 20474-12:2017 Earth-moving machinery — Safety — Part 12: Requirements for cable excavators
    DIN EN 1494:2009-05 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
    DIN EN 13000:2014-11 CRANES - MOBILE CRANES
    DIN EN 1493:2011-02 Vehicle lifts
    DIN EN 14439:2010-03 Cranes - Safety - Tower cranes (includes Amendment A2:2009)
    DIN EN 15011:2014-09 Cranes - Bridge and gantry cranes (includes Amendment A1:2014)
    BS EN 15056 : 2006 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
    BS EN 14238 : 2004 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    UNE-EN 1493:2011 Vehicle lifts
    13/30272150 DC : 0 BS EN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURE - SAFETY
    UNE-EN 13135-2:2005 Cranes - Equipment - Part 2: Non-electrotechnical equipment
    I.S. EN 12158-1:2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    I.S. EN 12158-2:2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    EN 15746-2:2010+A1:2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 15056:2006 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
    EN 16851:2017 CRANES - LIGHT CRANE SYSTEMS
    I.S. EN 14492-1:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    I.S. EN 1808:2015 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    I.S. EN 14439:2006 CRANES - SAFETY - TOWER CRANES
    I.S. EN 1494:2000 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
    DIN EN 14492-1:2010-06 Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009)
    I.S. EN 13852-1:2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
    I.S. EN 1846-3:2013 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
    DIN EN 13135-1:2004-05 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
    I.S. EN 474-12:2006 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    I.S. EN 1493:2010 VEHICLE LIFTS
    EN 15011:2011+A1:2014 CRANES - BRIDGE AND GANTRY CRANES
    I.S. EN 13557:2003 CRANES - CONTROLS AND CONTROL STATIONS
    I.S. EN 280:2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
    UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 14985:2012 CRANES - SLEWING JIB CRANES
    I.S. EN 528:2008 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
    VDI 2381-2 : 2009 FINAL INSPECTION OF MOBILE CRANES - INSTRUCTIONAL FORM FOR EXPERTS
    VDI 2388:2007-10 OVERHEAD TRAVELLING CRANES IN BUILDINGS - LAYOUT DATA
    VDI 2381-1 : 2009 FINAL INSPECTION OF STATIONARY AND TRACK-BOUND CRANES - INSTRUCTIONAL FORM FOR EXPERTS
    VDI 3570:2013-08 OVERLOAD SAFEGUARDS FOR CRANES
    VDI 4449:2009-04 GUIDANCE ON THE MODIFICATION OF CRANE SYSTEMS
    VDI 4412:2016-05 CABLELESS CONTROL OF CRANES
    BS ISO 20474-12:2017 Earth-moving machinery. Safety Requirements for cable excavators
    DIN EN 81-43:2010-05 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
    PREN 1493 : DRAFT 2008 VEHICLE LIFTS
    BS ISO 19354:2016 Ships and marine technology. Marine cranes. General requirements
    ISO 8566-1:2010 Cranes Cabins and control stations Part 1: General
    PREN 14492-1 : DRAFT 2015 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    ISO 12648:2006 Graphic technology Safety requirements for printing press systems
    ISO 12649:2004 Graphic technology Safety requirements for binding and finishing systems and equipment
    11/30249027 DC : 0 BS ISO 15442 - CRANES - SAFETY REQUIREMENTS FOR LOADER CRANES
    01/120061 DC : DRAFT JAN 2001 ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
    I.S. EN 16851:2017 CRANES - LIGHT CRANE SYSTEMS
    14/30295634 DC : 0 BS EN 16719 - TRANSPORT PLATFORMS
    BS ISO 12648:2006 Graphic technology. Safety requirements for printing press systems
    PREN 16191 : DRAFT 2010 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
    I.S. EN 81-41:2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
    NF EN 81-41 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
    ISO 10245-3:2008 Cranes Limiting and indicating devices Part 3: Tower cranes
    UNI EN 81-31 : 2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
    ISO 19354:2016 Ships and marine technology — Marine cranes — General requirements
    ISO 17842-1:2015 Safety of amusement rides and amusement devices Part 1: Design and manufacture
    ISO 12643-1:2009 Graphic technology Safety requirements for graphic technology equipment and systems Part 1: General requirements
    ISO/TR 25599:2005 Cranes Jib cranes International Standards for design, manufacturing, use and maintenance requirements and recommendations
    I.S. EN 60204-1:2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    DIN EN 1808:2015-08 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    DIN EN 12158-2:2011-04 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010)
    UNE-EN 15954-2:2014 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
    UNE-EN 15955-2:2014 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
    BS EN 13135-2 : 2004 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    BS EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    UNE-EN 60204-1:2007 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN 1846-3:2013 Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance
    UNI EN 13557 : 2008 CRANES - CONTROLS AND CONTROL STATIONS
    UNI EN 1846-3 : 2013 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
    UNI EN 13135-2 : 2010 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    UNI EN 474-12 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    UNI EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    UNI EN 15056 : 2009 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
    UNI EN 14439 : 2009 CRANES - SAFETY - TOWER CRANES
    UNI EN 14985 : 2012 CRANES - SLEWING JIB CRANES
    UNI EN 1493 : 2010 VEHICLE LIFTS
    UNI EN 13000 : 2014 CRANES - MOBILE CRANES
    UNI EN 13852-1 : 2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
    UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    UNI EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    UNI EN 1494 : 2009 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
    UNI EN 14492-1 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    UNI EN 12158-2 : 2010 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    UNI EN 13135-1 : 2010 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
    BS ISO 15442 : 2012 + A1 2015 CRANES - SAFETY REQUIREMENTS FOR LOADER CRANES
    15/30296047 DC : 0 BS EN 16851 - CRANES - LIGHT CRANE SYSTEMS
    04/30110212 DC : DRAFT MAR 2004 ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
    11/30215034 DC : DRAFT MAR 2011 BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    DIN EN 1570-2:2014-06 (Draft) SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
    BS EN 81-31:2010 Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts
    ISO 15442:2012 Cranes — Safety requirements for loader cranes
    PREN 17076 : DRAFT 2017 ANTI-COLLISION DEVICES AND SYSTEMS FOR TOWER CRANE - SAFETY CHARACTERISTICS AND REQUIREMENTS
    BS ISO 12649:2004 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
    UNE-EN 81-41:2011 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
    BS EN 1570-2:2016 Safety requirements for lifting tables Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s
    DIN EN 81-41:2016-06 (Draft) SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
    08/30190505 DC : 0 BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
    UNE-EN 1570-2:2017 Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s
    08/30190666 DC : DRAFT NOV 2008 BS ISO 7752-1 - CRANES - CONTROLS - LAYOUT AND CHARACTERISTICS - PART 1: GENERAL PRINCIPLES
    12/30274141 DC : 0 BS ISO 7752-3 - CRANES - CONTROL LAYOUT AND CHARACTERISTICS - PART 3: TOWER CRANES
    PD ISO/TR 25599:2006 Cranes. Jib cranes. International standards for design, manufacturing, use and maintenance requirements and recommendations
    BS EN 15955-2:2013 Railway applications. Track. Demountable machines and associated equipment General safety requirements
    14/30303313 DC : 0 PD 5304 - GUIDANCE ON SAFE USE OF MACHINERY
    NF EN 81-31 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
    ISO 10972-5:2006 Cranes — Requirements for mechanisms — Part 5: Bridge and gantry cranes
    DIN EN 16851:2015-05 (Draft) CRANES - LIGHT CRANE SYSTEMS
    ISO 14990-1:2016 Earth-moving machinery Electrical safety of machines utilizing electric drives and related components and systems Part 1: General requirements
    I.S. EN 15954-2:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 60204-33:2011 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
    ISO 16368:2010 Mobile elevating work platforms Design, calculations, safety requirements and test methods
    I.S. EN 15011:2011 CRANES - BRIDGE AND GANTRY CRANES
    ISO 7752-1:2010 Cranes Control layout and characteristics Part 1: General principles
    DIN EN 14985:2012-05 Cranes - Slewing jib cranes
    UNE-EN 280:2014 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
    DIN EN 15056 E : 2010 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
    DIN EN 280:2016-04 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests (includes Amendment A1:2015)
    DIN EN 13814:2005-06 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    DIN EN 528:2009-02 Rail dependent storage and retrieval equipment - Safety requirements
    DIN EN 14439:2010-03 CRANES - SAFETY - TOWER CRANES
    DIN EN 13852-1:2014-01 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
    DIN EN 474-12:2010-05 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators (includes Amendment A1:2008)
    BS EN 13135-1 : 2003 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
    BS EN 1846-3:2013 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
    BS ISO 17842-1:2015 Safety of amusement rides and amusement devices Design and manufacture
    BS EN 12158-2 : 2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    17/30357380 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
    14/30238347 DC : 0 BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    BS EN 14985 : 2012 CRANES - SLEWING JIB CRANES
    BS EN 14492-1 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    BS EN 1808:2015 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    BS EN 15011 : 2011 CRANES - BRIDGE AND GANTRY CRANES
    10/30218104 DC : 0 BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
    BS EN 474-12 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    BS EN 60204-33:2011 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
    BS EN 14439 : 2006 CRANES - SAFETY - TOWER CRANES
    BS ISO 14990-1:2016 (published 2017-03) Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements
    BS EN 1494 : 2001 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
    UNE-EN 12158-2:2001 Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices.
    DIN EN 15056:2010-02 Cranes - Requirements for container handling spreaders (includes Amendment A1:2009)
    UNE-EN 13852-1:2014 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
    DIN 56950:2005-04 ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - SAFETY REQUIREMENTS AND TESTING
    EN 81-43:2009 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
    EN 13814 : 2004 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    EN 1808:2015 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    EN 81-31:2010 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
    EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    EN 1493:2010 VEHICLE LIFTS
    EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment
    EN 14985:2012 Cranes - Slewing jib cranes
    EN 14238:2004+A1:2009 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    EN 15056:2006+A1:2009 Cranes - Requirements for container handling spreaders
    EN 14492-1:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    EN 13852-1:2013 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
    EN 474-12:2006+A1:2008 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    EN 14439:2006+A2:2009 CRANES - SAFETY - TOWER CRANES
    EN 12158-2:2000+A1:2010 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    EN 14492-2:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    EN 280:2013+A1:2015 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
    UNI EN 528 : 2009 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
    DIN EN 16851 E : 2017 CRANES - LIGHT CRANE SYSTEMS
    I.S. EN 13814:2005 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    ISO 10972-4:2007 Cranes — Requirements for mechanisms — Part 4: Jib cranes
    10/30194893 DC : 0 BS EN 13135-2:2004/A1 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    04/30122476 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    06/30144756 DC : DRAFT JAN 2006 ISO 10972-4 - CRANES - REQUIREMENTS FOR MECHANISMS - PART 4: JIB CRANES
    03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
    I.S. EN 81-43:2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
    08/30181434 DC : DRAFT DEC 2008 BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    06/30158501 DC : 0 BS ISO 11660-1 - CRANES - ACCESS, GUARDS AND RESTRAINTS - PART 1: GENERAL
    DIN EN 1570-2 E : 2017 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
    PREN 14439 : DRAFT 2014 CRANES - SAFETY - TOWER CRANES
    16/30339195 DC BS EN 81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility
    DIN EN 15954-2:2013-11 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
    UNI ISO 7752-1 : 2011 CRANES - CONTROL LAYOUT AND CHARACTERISTICS - PART 1: GENERAL PRINCIPLES
    DIN EN 81-31:2010-08 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
    DIN EN 15746-2:2016-02 (Draft) Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
    CAN/CSA-B354.6:17 Mobile elevating work platforms — Design, calculations, safety requirements, and test methods (Adopted ISO 16368:2010, second edition , 2010-05-15, with Canadian deviations)
    I.S. EN 81-31:2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
    UNE-EN 12999:2011 Cranes - Loader cranes
    BS EN 15746-2 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    15/30279801 DC : 0 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    17/30348010 DC : 0 BS EN 17076 - ANTI-COLLISION DEVICES AND SYSTEMS FOR TOWER CRANE - SAFETY CHARACTERISTICS AND REQUIREMENTS
    DIN EN 14492-2:2016-08 (Draft) CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    DIN EN 13557:2009-07 CRANES - CONTROLS AND CONTROL STATIONS
    DIN EN 13135-2:2011-07 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    DIN EN 14492-1:2015-05 (Draft) Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015
    02/203840 DC : DRAFT MAY 2002 IEC 60204-1/ED.5.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    BS EN 13814:2004 Fairground and amusement park machinery and structures. Safety
    BS EN 13557 : 2003 CRANES - CONTROLS AND CONTROL STATIONS
    UNE-EN 1808:2016 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
    UNE-EN 1846-3:2015 Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance
    BS EN 12158-1 : 2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    BS EN 13852-1:2013 Cranes. Offshore cranes General-purpose offshore cranes
    BS EN 60204-1 : 2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    BS EN 14492-2 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    DIN EN 14492-2:2010-05 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    EN 13135-1:2003+A1:2010 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
    DIN EN 1570-2:2017-03 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
    DIN EN 16851:2017-06 Cranes - Light crane systems
    DIN EN 81-41:2011-09 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
    EN 60204-33 : 2011 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
    DIN EN 1846-3:2013-11 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
    DIN EN 12151:2008-05 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    DIN EN 15746-2:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
    EN 12158-1:2000+A1:2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    UNI EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
    IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
    IEC 60038:2009 IEC standard voltages
    IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IEC 60364-4-43:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
    IEC 60228:2004 Conductors of insulated cables
    ISO 14122-3:2016 Safety of machinery Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails
    IEC 61984:2008 Connectors - Safety requirements and tests
    ISO 14122-1:2016 Safety of machinery Permanent means of access to machinery Part 1: Choice of fixed means and general requirements of access
    IEC 60204-31:2013 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
    IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
    IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
    IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
    IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
    IEC 60050-411:1996 International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery
    IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV Plugs and socket-outlets for household and similar purposes - Part1: General requirements
    IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
    IEC 62023:2011 Structuring of technical information and documentation
    IEC GUIDE 106:1996 Guide for specifying environmental conditions for equipmentperformance rating
    ISO 13852:1996 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
    IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
    IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
    IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
    IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
    ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
    ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
    IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV Low-voltage fuses - Part 1: General requirements
    IEC 62027:2011 Preparation of object lists, including parts lists
    IEC 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
    IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
    IEC 61082-1:2014 RLV Preparation of documents used in electrotechnology - Part 1: Rules
    IEC 60050-442:1998 International Electrotechnical Vocabulary (IEV) - Part 442: Electrical accessories
    IEC 60757:1983 Code for designation of colours
    IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
    IEC 60072-1:1991 Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
    IEC 61558-2-17:1997 Safety of power transformers, power supply units and similar - Part2: Particular requirements for transformers for switch mode powersupplies
    IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
    IEC 60364-6:2016 Low voltage electrical installations - Part 6: Verification
    IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
    IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
    IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
    IEC 60439-1:1999+AMD1:2004 CSV Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
    ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    IEC 62079:2001 Preparation of instructions - Structuring, content and presentation
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
    IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
    IEC 60072-2:1990 Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
    IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
    HD 516 S2:1997/A2:2008 GUIDE TO USE OF LOW VOLTAGE HARMONIZED CABLES
    IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    IEC 60947-5-2:2007+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches
    IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    IEC 60870-5-1:1990 Telecontrol equipment and systems. Part 5: Transmission protocols - Section One: Transmission frame formats
    IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    ISO 14122-2:2016 Safety of machinery Permanent means of access to machinery Part 2: Working platforms and walkways
    IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
    IEC 60364-4-42:2010+AMD1:2014 CSV Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects
    ISO 13849-1:2015 Safety of machinery Safety-related parts of control systems Part 1: General principles for design
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
    IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
    IEC 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective