BS ISO 16368:2003
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Mobile elevating work platforms. Design calculations, safety requirements and test methods
Hardcopy , PDF
01-05-2004
English
06-10-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements and/or measures
5.1 Compliance
5.2 Structural and stability calculations
5.3 Chassis and stabilizers
5.4 Extending structure
5.5 Extending structure drive systems
5.6 Work platform
5.7 Controls
5.8 Electrical equipment
5.9 Hydraulic systems
5.10 Hydraulic cylinders
5.11 Safety devices
6 Verification of the safety requirements and/or measures
6.1 Examinations and tests
6.2 Type tests of MEWPs
6.3 Tests before placing on the market
7 Information for use (see Annex F)
7.1 General
7.2 Instruction handbook
7.3 Marking
Annex A (informative) Use of MEWPs in wind speeds greater
than 12,5 m/s (Beaufort Scale 6)
Annex B (informative) Dynamic factors in stability and
structural calculations
Annex C (normative) Calculation of wire-rope drive systems
Annex D (informative) Calculation example - Wire-rope drive
systems
Annex E (informative) Kerb test calculations
Annex F (informative) Instruction handbook
Bibliography
Gives technical safety requirements and measures for all types and sizes of mobile elevating work platforms (MEWPs) intended to move persons to working positions. Applies to the structural design calculations and stability criteria, construction, safety examinations and security tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards.
| Committee |
MHE/12
|
| DevelopmentNote |
Supersedes 02/708844 DC (10/2003)
|
| DocumentType |
Standard
|
| Pages |
90
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| ISO 16368:2010 | Identical |
| ISO 18893:2014 | Mobile elevating work platforms — Safety principles, inspection, maintenance and operation |
| ISO 2408:2017 | Steel wire ropes — Requirements |
| ISO 20381:2009 | Mobile elevating work platforms Symbols for operator controls and other displays |
| ISO 18878:2013 | Mobile elevating work platforms — Operator (driver) training |
| IEC 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| ISO 4302:2016 | Cranes — Wind load assessment |
| EN 1726-2:2000 | Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
| EN 1570:1998+A2:2009 | Safety requirements for lifting tables |
| ISO 4301-4:1989 | Cranes and related equipment — Classification — Part 4: Jib cranes |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 4308-2:1988 | Cranes and lifting appliances Selection of wire ropes Part 2: Mobile cranes Coefficient of utilization |
| EN 528:2008 | Rail dependent storage and retrieval equipment - Safety requirements |
| EN 1756-1:2001+A1:2008 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods |
| EN 81-1:1998+A3:2009 | Safety rules for the construction and installation of lifts - Part 1: Electric lifts |
| ISO 16369:2007 | Elevating work platforms Mast-climbing work platforms |
| SIA A92.8 : 2012 | VEHICLE-MOUNTED BRIDGE INSPECTION AND MAINTENANCE DEVICES |
| IEC 60707:1999 | Flammability of solid non-metallic materials when exposed to flame sources - List of test methods |
| ISO 4309:2010 | Cranes Wire ropes Care and maintenance, inspection and discard |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 4305:2014 | Mobile cranes — Determination of stability |
| ISO 8087:1985 | Mobile cranes Drum and sheave sizes |
| EN 81-2 : 1998 + A3 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN 1915-2:2001+A1:2009 | Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
| BS 2573-2:1980 | Rules for the design of cranes Specification for classification, stress calculations and design of mechanisms |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| EN 1808:2015 | Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests |
| EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.