BS ISO 18413:2015
Current
The latest, up-to-date edition.
Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting
Hardcopy , PDF
English
31-03-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Inspection document principles
5 Guidelines for selecting contamination extraction
and analysis procedures
6 Contaminant extraction principles
7 Contaminant analysis principles
8 Data reporting principles
9 Criterion for acceptance
10 Identification statement (reference of this
International Standard)
Annex A (normative) - Contaminant extraction
principles - Agitation method
Annex B (normative) - Contaminant extraction
principles - Pressure rinse method
Annex C (normative) - Contaminant extraction
principles - Ultrasonic vibration method
Annex D (normative) - Contaminant extraction
principles - Functional test method
Annex E (normative) - Contaminant analysis principles
and data reporting principles
Annex F (informative) - Guidelines for the design of a
functional test method test stand
Annex G (informative) - Determination of geometric
characteristics of components
Bibliography
Defines the content of an inspection document that specifies both the cleanliness requirement for the specified hydraulic fluid power component and the inspection method to be used for evaluating its cleanliness level.
| Committee |
MCE/18/-/6
|
| DevelopmentNote |
Supersedes 01/703379 DC (11/2002)
|
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard specifies the content of an inspection document that specifies both the cleanliness requirement for the specified hydraulic fluid power component and the inspection method to be used for evaluating its cleanliness level. In addition, guidelines for relevant extraction methods and analysis methods are given.
Determination of what constitutes as an appropriate cleanliness level requirement for any particular component is beyond the scope of this International Standard. ISO12669 provides a method of determining the required cleanliness of a hydraulic system. ISOTR10686 provides a method of relating the required cleanliness of components to the required cleanliness of the hydraulic system.
For the purposes of this International Standard, approved functional liquids are considered to be components.
This International Standard is applicable to the particulate contamination on the wetted surfaces and volumes of any hydraulic fluid power system component. Appearance defects and liquid or gaseous contamination are not covered by this International Standard.
This International Standard does not address safety problems that might arise from hazardous materials, operations, and equipment associated with its use. The user of this International Standard is responsible for establishing appropriate safety and health practices and determining the applicability of regulatory limitations prior to use.
| Standards | Relationship |
| ISO 18413:2015 | Identical |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 11943:1999 | Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation |
| ISO/TR 10686:2013 | Hydraulic fluid power Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ISO 3722:1976 | Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods |
| ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ISO 4021:1992 | Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system |
| ISO 4405:1991 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method |
| ISO 4407:2002 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.