BS ISO 18436-5:2012
Current
The latest, up-to-date edition.
Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst
Hardcopy , PDF
English
31-12-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of personnel (laboratory
lubricant analysis)
5 Eligibility
6 Examinations
Annex A (normative) - Training course requirements
for laboratory lubricant analysis personnel
Bibliography
Describes the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using laboratory-based lubricant analysis.
| Committee |
GME/21/7
|
| DevelopmentNote |
Supersedes 08/30190684 DC. (12/2012) Reviewed and confirmed by BSI, May 2018. (05/2018)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of ISO18436 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using laboratory-based lubricant analysis.
A certificate or declaration of conformity to this part of ISO18436 provides recognition of the qualifications and competence of individuals to perform laboratory-based lubricant analysis for machinery condition monitoring. It is possible that this procedure is not applicable to specialized equipment or other specific situations.
This part of ISO18436 covers a three-category classification programme that is based on the technical areas delineated herein.
| Standards | Relationship |
| ISO 18436-5:2012 | Identical |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
| ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
| SAE J310_200507 | Automotive Lubricating Greases |
| ASTM D 6595 : 2017 : REDLINE | Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| ISO 18436-1:2012 | Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 1: Requirements for assessment bodies and the assessment process |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| ISO 3771:2011 | Petroleum products — Determination of base number — Perchloric acid potentiometric titration method |
| ASTM D 3524 : 2014 | Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
| ASTM D 2896 : 2015 : REDLINE | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| ASTM E 169 : 2016 : REDLINE | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ASTM D 5967 : 2017 : REDLINE | Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
| SAE J300_201501 | Engine Oil Viscosity Classification |
| ISO 13372:2004 | Condition monitoring and diagnostics of machines Vocabulary |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
| ISO 10337:1997 | Crude petroleum — Determination of water — Coulometric Karl Fischer titration method |
| ISO 18436-3:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process |
| ASTM D 7418 : 2012 : REDLINE | Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring |
| ASTM D 2711 : 2017 : REDLINE | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
| ISO 2909:2002 | Petroleum products Calculation of viscosity index from kinematic viscosity |
| ASTM D 3427 : 2015 : REDLINE | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
| ISO 6619:1988 | Petroleum products and lubricants — Neutralization number — Potentiometric titration method |
| ISO 13736:2013 | Determination of flash point Abel closed-cup method |
| ASTM D 6224 : 2016 : REDLINE | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.