BS ISO 3183-3:1999
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C
Hardcopy , PDF
01-09-2007
English
15-07-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
4.1 Classification
4.2 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Other information
5.3 Examples for ordering
6 Manufacturing
6.1 General
6.2 Steelmaking
6.3 Pipe manufacturing
6.4 Delivery condition
6.5 Cold expansion and cold sizing
6.6 Strip/plate end welds
6.7 Jointers
7 Requirements
7.1 General
7.2 Chemical composition
7.3 Mechanical and technological properties
7.4 Weldability
7.5 Surface conditions, imperfections and defects
7.6 Dimensions, masses and tolerances
8 Inspection
8.1 Types of inspection and inspection documents
8.2 Specific inspection
9 Marking of the pipes
9.1 General marking
9.2 Special marking
10 Coatings for temporary protection
Annex A (informative) Correspondence with API steel grades
Annex B (normative) Manufacturing procedure qualification
Annex C (normative) Treatment of imperfections and defects
disclosed by visual examination
Annex D (normative) Non-destructive testing
Bibliography
Defines technical delivery conditions for unalloyed and alloyed (not stainless) seamless and welded steel pipes. Contains more stringent requirements than those defined in ISO 3183-1 and ISO 3183-2. Applicable to pipes usually used for transmitting combustible fluids under especially arduous circumstances, eg offshore service, low temperature service and/or sour service. Does not cover cast steel pipes.
| Committee |
PSE/17/-/3
|
| DevelopmentNote |
Supersedes 97/700851 DC. (05/2005)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| ISO 3183-3:1999 | Identical |
| PD 8010-1:2004 | Code of practice for pipelines Steel pipelines on land |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| EN 288-3:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
| API 5L3 : 2014 | DROP-WEIGHT TEAR TESTS ON LINE PIPE |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| ISO 12094:1994 | Welded steel tubes for pressure purposes Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes |
| ISO 4885:2017 | Ferrous materials Heat treatments Vocabulary |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ISO 9303:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal imperfections |
| ISO 9304:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Eddy current testing for the detection of imperfections |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| ISO 11496:1993 | Seamless and welded steel tubes for pressure purposes Ultrasonic testing of tube ends for the detection of laminar imperfections |
| API 5L : 2012 | LINE PIPE |
| ISO/TR 4949:1989 | Steel names based on letter symbols |
| ISO 9598:1989 | Seamless steel tubes for pressure purposes Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 9402:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections |
| ISO 13664:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube ends for the detection of laminar imperfections |
| ISO 7539-2:1989 | Corrosion of metals and alloys Stress corrosion testing Part 2: Preparation and use of bent-beam specimens |
| ISO 10543:1993 | Seamless and hot-stretch-reduced welded steel tubes for pressure purposes Full peripheral ultrasonic thickness testing |
| ISO 148:1983 | Steel — Charpy impact test (V-notch) |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| ISO 6508:1986 | Metallic materials Hardness test Rockwell test (scales A - B - C - D - E - F - G - H - K) |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 13665:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
| ISO 12135:2016 | Metallic materials Unified method of test for the determination of quasistatic fracture toughness |
| ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
| ISO 8492:2013 | Metallic materials Tube Flattening test |
| ISO 3183-1:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ISO 9764:1989 | Electric resistance and induction welded steel tubes for pressure purposes Ultrasonic testing of the weld seam for the detection of longitudinal imperfections |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 9765:1990 | Submerged arc-welded steel tubes for pressure purposes Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections |
| ISO 1027:1983 | Radiographic image quality indicators for non-destructive testing Principles and identification |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 12096:1996 | Submerged arc-welded steel tubes for pressure purposes Radiographic testing of the weld seam for the detection of imperfections |
| ISO 10124:1994 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Ultrasonic testing for the detection of laminar imperfections |
| ISO 13663:1995 | Welded steel tubes for pressure purposes Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| ISO 9305:1989 | Seamless steel tubes for pressure purposes Full peripheral ultrasonic testing for the detection of transverse imperfections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.