CFR 40(PTS300-399) : JUL 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY
Superseded date
14-03-2024
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
DocumentType |
Standard
|
PublisherName |
Code of Federal Regulations
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
MIL-DTL-24607 Revision B:2008 | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS |
MIL-DTL-1115 Revision E:2010 | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
MIL-PRF-3135 Revision H:2008 | DECK COVERING UNDERLAY MATERIALS |
MIL-PRF-24667 Revision C:2008 | COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
MIL-PRF-32558 Base Document:2016 | BLAST SENSING AND BLAST DATA RECORDING SYSTEMS FOR USE IN U.S. MILITARY GROUND VEHICLES |
MIL-DTL-700 Revision B:1998 | ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC) |
MIL-PRF-24712 Revision B:2014 | COATINGS, POWDER, THERMOSETTING |
MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
MIL-PRF-32518 Base Document:2015 | INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS |
MIL-PRF-32171 Revision B:2009 | DECK COATINGS, HIGH DURABILITY |
TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
MIL-PRF-32177 Revision A:2012 | CLEANING COMPOUND, NONSKID |
ASTM D 7294 : 2013 : REDLINE | Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated With Chemicals of Interest |
ASTM E 1819 : 2015 : REDLINE | Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities |
ASTM D 6954 : 2018 : REDLINE | Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation |
NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
IPC 7526 : 2007 | STENCIL AND MISPRINTED BOARD CLEANING HANDBOOK |
IPC CH 65 : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
IPC CH 65 CHINESE : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
ASTM D 6008 : 1996 | Standard Practice for Conducting Environmental Baseline Surveys |
NFPA 1405 : 2016 | LAND-BASED FIRE DEPARTMENTS THAT RESPOND TO MARINE VESSEL FIRES |
API 4719 : 2017 | INDUSTRY GUIDELINES ON REQUESTING REGULATORY CONCURRENCE FOR SUBSEA DISPERSANT USE |
ASTM E 1527 : 2013 | Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process |
NFPA 471 : 2002 | RESPONDING TO HAZARDOUS MATERIALS INCIDENTS |
NFPA 1072:2017 | HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS |
ASCE 7 10 : 2011 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
ASTM D 5745 : 2015 : REDLINE | Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation |
ASHRAE GUIDELINE 6 : 2015 | REFRIGERANT INFORMATION RECOMMENDED FOR PRODUCT DEVELOPMENT AND STANDARDS |
MIL-G-18997 Revision E:1991 | GAUGE, PRESSURE, DIAL INDICATING |
MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
ASTM E 2247 : 2016 : REDLINE | Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland or Rural Property |
ASTM E 2770 : 2017 : REDLINE | Standard Guide for Operational Guidelines for Initial Response to Suspected Biological Agents and Toxins |
MIL-DTL-15090 Revision E:2010 | ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
MIL-PRF-24613 Revision A:2007 | DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
A-A-52529 Revision A:2016 | HANGER, EXHAUST, MUFFLER AND TAILPIPE (METRIC) |
MIL-PRF-24635 Revision E:2009 | COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
MIL-PRF-32516 Base Document:2015 | ELECTRONIC TEST EQUIPMENT, INTERMITTENT FAULT DETECTION AND ISOLATION FOR CHASSIS AND BACKPLANE CONDUCTIVE PATHS |
NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
NFPA 471 SPANISH : 2002 | RECOMMENDED PRACTICE FOR RESPONDING TO HAZARDOUS MATERIALS INCIDENTS |
NFPA 475 : 2017 | RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM |
NFPA 1500 : 2018 | FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM |
API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
ASTM E 2458 : 2017 : REDLINE | Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces |
IEEE 1635-2012 | IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications |
ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
ASHRAE GUIDELINE 21 : 2012 | VENTILATION AND THERMAL MANAGEMENT OF BATTERIES FOR STATIONARY APPLICATIONS |
MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
API 1169 : 2013 | RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
API RP 1145 : 2018 | PREPARATION OF RESPONSE PLANS FOR OIL SPILLS FROM OFFSHORE FACILITIES |
ASTM D 6008 : 1996 : R2014 | Standard Practice for Conducting Environmental Baseline Surveys |
API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
NFPA 473 : 2018 | COMPETENCIES FOR EMS PERSONNEL RESPONDING TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
KKK-F-2115 Base Document:1985 | FIRE TRUCK (PUMPER), DIESEL ENGINE, 4X2 OR 4X4, 11,000 TO 20,000 POUNDS GVW |
MIL-PRF-32548 Base Document:2016 | OCCUPANT SEAT BELT RESTRAINTS FOR USE IN U.S. MILITARY GROUND VEHICLES |
ASTM F 1656 : 2001 | Standard Guide for Health and Safety Training of Oil Spill Responders in the United States (Withdrawn 2010) |
ASTM E 2091 : 2017 : REDLINE | Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls |
ASTM D 6008 : 1996 : R2005 | Standard Practice for Conducting Environmental Baseline Surveys |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.