• Shopping Cart
    There are no items in your cart

CFR 49(PTS100-177) : OCT 2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

TRANSPORTATION

Superseded date

12-06-2019

Superseded by

CFR 49(PTS100-177):2018

Published date

12-01-2013

Sorry this product is not available in your region.

DevelopmentNote
Supersedes & Renumbers CFR 49(PTS100-185). (03/2012)
DocumentType
Standard
PublisherName
Code of Federal Regulations
Status
Superseded
SupersededBy
Supersedes

NFPA 704 : 2017 STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE
API RP 754 : 2016 PROCESS SAFETY PERFORMANCE INDICATORS FOR THE REFINING AND PETROCHEMICAL INDUSTRIES
NFPA 495 : 2018 EXPLOSIVE MATERIALS CODE
API MPM CH8.3 : 1995(R2010) MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS
DOD-D-64015 Revision A:1986 Diethylene Glycol Dinitrate (DEGDN) (for use in Ammunition)
NFPA 473 : 2018 COMPETENCIES FOR EMS PERSONNEL RESPONDING TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS
SAE AMS2644F Inspection Material, Penetrant
ASTM D 6368 : 2006 : R2012 Standard Specification for Vapor-Degreasing Solvents Based on <emph type="bdit">normal</emph>-Propyl Bromide and Technical Grade <emph type="bdit">normal</emph>-Propyl Bromide
ASTM D 6517 : 2000 : R2005 Standard Guide for Field Preservation of Groundwater Samples
ANSI N14.5 : 2014 RADIOACTIVE MATERIALS - LEAKAGE TESTS ON PACKAGES FOR SHIPMENT
MIL L 12039 : D LITHIUM HYDRIDE, TECHNICAL (METRIC)
MIL A 24641 : A ACID, HYDROFLUORIC; TECHNICAL
MIL-PRF-32518 Base Document:2015 INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS
MIL-STD-3001-1 Revision A:2014 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS)
A-A-52545 Revision B:2009 HEATERS, VEHICULAR COMPARTMENT 28 VOLT, DC
SAE AS 1066 : 2012 MINIMUM STANDARDS FOR VALVE, HIGH PRESSURE OXYGEN, CYLINDER SHUT OFF, MANUALLY OPERATED
AAMI TIR15 : 2016 PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION
IEEE/ANSI N323AB-2013 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ASTM D 7678 : 2017 : REDLINE Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
AAMI ST24 : 1999 : R2013 AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES
ISO/TS 15453:2017 Gas cylinders — Seamless steel and aluminium-alloy gas cylinders — Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions
AAMI ST41 : 2008 ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS
SAE J2851_201502 Recovery Equipment for Contaminated R-134a or R-1234yf Refrigerant from Mobile Automotive Air Conditioning Systems
ASTM D 5396 : 2004 : R2010 Standard Specification for Reclaimed Perchloroethylene
NFPA 318 : 2018 PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES
NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
NFPA 40 : 2016 STORAGE AND HANDLING OF CELLULOSE NITRATE FILM
NFPA 45 : 2015 FIRE PROTECTION FOR LABORATORIES USING CHEMICALS
NFPA 30A : 2018 MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES
NFPA 407 : 2017 AIRCRAFT FUEL SERVICING
NFPA 35 : 2016 MANUFACTURE OF ORGANIC COATINGS
NFPA 307 : 2016 CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES
NFPA 17A : 2017 WET CHEMICAL EXTINGUISHING SYSTEMS
NFPA 2010 : 2015 FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS
NFPA 400 : 2016 HAZARDOUS MATERIALS CODE
NFPA 17 : 2017 DRY CHEMICAL EXTINGUISHING SYSTEMS
NFPA 2001 : 2018 CLEAN AGENT FIRE EXTINGUISHING SYSTEMS
UFC 4-510-01 : Change 2 UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES
MIL-PRF-32565 Revision A:2017 BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION
ASHRAE GUIDELINE 39 : 2017 METHOD OF TEST FOR MEASURING FRACTIONATED COMPOSITIONS OF REFRIGERANT BLENDS
SAE J1538_201504 Glossary of Automotive Inflatable Restraint Systems
NFPA 1124 : 2017 MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES
ASTM D 8061 : 2016 Standard Practice for Handling, Transportation, and Storage of 2-Bromo-3,3,3-Trifluoro-1-Propene (CF<inf>3</inf>CBr=CH<inf>2</inf>)
SAE AIR5690 Considerations for the Carriage and Use of Visual Distress Signals in Airline Overwater Survival Kits
SAE AIR 5742 : 2017 PACKAGING AND TRANSPORTATION OF OXYGEN EQUIPMENT
MIL-C-48617 Revision A:1983 CARTRIDGE, 20 MM, HIGH EXPLOSIVE, INCENDIARY, M56A4 LOADING, ASSEMBLING AND PACKING
MIL-B-18147 Revision C:1983 BOATS AND CRAFT; PREPARATION FOR DELIVERY OF
API 781 : 2016 FACILITY SECURITY PLAN METHODOLOGY FOR THE OIL AND NATURAL GAS INDUSTRIES
API 780 : 2013 SECURITY RISK ASSESSMENT METHODOLOGY FOR THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
ASTM D 4547 : 2015 : REDLINE Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
MIL-PRF-83671 Revision B:1997 FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR
DOD-M-64040 Revision A:1986 METHYL DIPHENYLUREA
SAE AS6163 Temperature Controlled Container - Performance Requirements and Test Parameters
ASTM D 5632/D5632M : 2017 : REDLINE Standard Specification for Halon 1301, Bromotrifluoromethane (CF<inf>3</inf>Br)
SAE AIR1059E Oxygen Cylinder Quality, Serviceability, Maintenance Transfilling and Marking
ASTM D 7815 : 2017 : REDLINE Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF<inf>2</inf>BrCl)
MIL-DTL-87177 Revision B:2014 Lubricants, Corrosion Preventive Compound, Water Displacing, Synthetic
ASTM D 5616 : 2004 : R2010 Standard Specification for Reclaimed Trichloroethylene
NFPA 1072:2017 HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS
NFPA 1122 : 2018 CODE FOR MODEL ROCKETRY
SAE AS87132 Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners
NFPA 1125 : 2017 MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS
AAMI ST24 : 1999 : R2005 AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES
ANSI A10.7 : 2011 SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS
FM 5320 : 2013 DRY CHEMICAL EXTINGUISHING SYSTEMS
ASTM D 6911 : 2015 : REDLINE Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
ASTM D 5396 : 2004 Standard Specification for Reclaimed Perchloroethylene
ASTM E 2601 : 2015 : REDLINE Standard Practice for Radiological Emergency Response
ASTM D 6954 : 2018 : REDLINE Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
ASTM D 5616 : 2004 Standard Specification for Reclaimed Trichloroethylene
ASTM D 7887 : 2013 Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests
NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE
NFPA 301 : 2018 SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS
NFPA 58 : 2017 LIQUEFIED PETROLEUM GAS CODE
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
ASTM D 7327 : 2017 : REDLINE Standard Specification for HFC Blend B (CH<inf>2</inf>FCF<inf>3</inf>, CHF<inf>2</inf >CF<inf>3</inf>, and CO<inf>2</inf>)
ANSI/AAMI ST79:2017 COMPREHENSIVE GUIDE TO STEAM STERILIZATION AND STERILITY ASSURANCE IN HEALTH CARE FACILITIES
NFPA 1 : 2021 FIRE CODE
NFPA 498 : 2018 SAFE HAVENS AND INTERCHANGE LOTS FOR VEHICLES TRANSPORTING EXPLOSIVES
MIL-A-48690 Base Document:1987 ACTUATOR, PISTON, PA532 LOADING, ASSEMBLING, AND PACKING
ANSI A10.7 : 2011 SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS
ASTM D 5396 : 2004 : R2015 Standard Specification for Reclaimed Perchloroethylene
AAMI ST24 : 1999 : R2009 AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES
SAE ARP4378C Accumulator, Hydraulic, Welded Bellows, Factory Pre-Charged
FAA AC 91-70 : 2016 OCEANIC AND REMOTE CONTINENTAL AIRSPACE OPERATIONS
MIL C 48669 : 0 CARTRIDGE, 40MM, M918 TP, ESCAPEMENT ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING
FAA AC 91-84 : 2009 FRACTIONAL OWNERSHIP PROGRAMS
NFPA 1126 : 2016 USE OF PYROTECHNICS BEFORE A PROXIMATE AUDIENCE
ASTM D 5616 : 2004 : R2016 Standard Specification for Reclaimed Trichloroethylene
MIL-DTL-48360 Revision A:2014 Charge, Propelling, M200, for 105MM Howitzer, M119 Loading, Assembling and Packing
MIL-N-246 Revision B:1962 NITROGLYCERIN
MIL-A-22262 Revision B:1993 ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING
MIL-PRF-32516 Base Document:2015 ELECTRONIC TEST EQUIPMENT, INTERMITTENT FAULT DETECTION AND ISOLATION FOR CHASSIS AND BACKPLANE CONDUCTIVE PATHS
NFPA 53 : 2016 MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES
SAE AMSA8576A Adhesive, Acrylic Base, for Acrylic Plastic
SAE ARP5818A Aircraft Refueling Vehicle Design and Performance Requirements
SAE AMS 3066 : 2016 COMPOUND, CORROSION-INHIBITING WATER-DISPLACING, SOFT FILM, AEROSOL CANNED
API MPM CH8.3 : 1995 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS
NFPA 475 : 2017 RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM
AAMI ST24:1999(R2018) AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES
ASTM D 7673/D7673M : 2015 : REDLINE Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF<inf>2</inf>BrCl)
NFPA 921 : 2017 GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS
ASTM F 2995 : 2013 Standard Guide for Shipping Possibly Infectious Materials, Tissues, and Fluids
ASTM E 1302 : 2013 Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
ASTM D 8134 : 2018 Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations (UN) IBC Design Types
ASTM E 1302 : 2013 : R2017 Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
ASTM F 963 : 2017 : REDLINE Standard Consumer Safety Specification for Toy Safety
ASTM D 6517 : 2000 : R2012 : EDT 1 Standard Guide for Field Preservation of Groundwater Samples
ASTM D 6368 : 2006 Standard Specification for Vapor-Degreasing Solvents Based on <bdit>normal</bdit>-Propyl Bromide and Technical Grade <bdit>normal</bdit>-Propyl Bromide
ASTM D 4995 : 2010 Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent
NFPA 55 : 2016 COMPRESSED GASES AND CRYOGENIC FLUIDS CODE
NASA SPEC 5022:2015 NASA MANUFACTURING AND TEST REQUIREMENTS FOR NORMALLY CLOSED PYROVALVES FOR HAZARDOUS FLIGHT SYSTEMS APPLICATIONS
NASA MSFC SPEC 3635 : 2012 PYROTECHNIC SYSTEM SPECIFICATION
NASA JSC 20793 : 2017 CREWED SPACE VEHICLE BATTERY SAFETY REQUIREMENTS
ASTM D 8060 : 2017 : REDLINE Standard Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF<inf>3</inf>CBr=CH<inf >2</inf>)
NFPA 472 : 2018 COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS
API MPM CH8.3 SPANISH : 1995 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS
MIL-PRF-24596 Revision B:2009 COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT
NFPA 1405 : 2016 LAND-BASED FIRE DEPARTMENTS THAT RESPOND TO MARINE VESSEL FIRES
15/30264711 DC : 0 BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
API 1169 : 2013 RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION
API 3000 : 2014 CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS
ANSI/AAMI ST58:2013(R2018) CHEMICAL STERILIZATION AND HIGH-LEVEL DISINFECTION IN HEALTH CARE FACILITIES
ASTM D 4995 : 2010 : R2015 Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent
ASTM D 6517 : 2000 Standard Guide for Field Preservation of Ground-Water Samples
FAA AC 120-95 : 2016 PORTABLE OXYGEN CONCENTRATORS
SAE J2788_201301 HFC-134a (R-134a) Recovery/Recycle/Recharging Equipment for Mobile Air-Conditioning Systems
MIL-PRF-32143 Revision B:2011 BATTERIES, STORAGE: AUTOMOTIVE, VALVE REGULATED LEAD ACID (VRLA)
AWWA B512 : 2015 SULFUR DIOXIDE
FAA AC 133-1 : 2017 ROTORCRAFT EXTERNAL-LOAD OPERATIONS
NFPA 1123 : 2018 Code for Fireworks Display<br>
ASTM D 5998 : 2016 : REDLINE Standard Specification for Molded Polyethylene Shipping and Storage Drums
MIL-PRF-53064 Revision C:2017 HOSE ASSEMBLY, ELASTOMER: LIGHTWEIGHT, COLLAPSIBLE; LIQUID FUEL
MIL-DTL-24641 Revision B:2015 Acid, Hydrofluoric: Technical
SAE AMS 2821 : 2017 SALTS, HEAT-TREATING (FOR METALS)
SAE AS 1046 : 2016 MINIMUM STANDARD FOR PORTABLE GASEOUS, OXYGEN EQUIPMENT
SAE J560_201604 Primary and Auxiliary Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable
ASTM F 1190 : 2018 : REDLINE Standard Guide for Neutron Irradiation of Unbiased Electronic Components
SAE J2843_201301 R-1234yf [HFO-1234yf] Recovery/Recycling/Recharging Equipment for Flammable Refrigerants for Mobile Air-Conditioning Systems
MIL-A-10840 Revision D:1982 ARSENIC TRIOXIDE, TECHNICAL
ANSI A10.7 REDLINE : 2011 COMPARISON DOCUMENT OF A10.7 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS (FOR VERSIONS 1998 AND 2011)
NFPA 30B : 2015 CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS
NFPA 385 : 2017 TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
NFPA 513 : 1998 MOTOR FREIGHT TERMINALS
MIL-STD-1320 Revision D:2014 FOR DESIGNING UNIT LOADS, TRUCKLOADS, RAILCAR LOADS, AND INTERMODAL LOADS FOR AMMUNITION AND EXPLOSIVES
UFC 3-810-01N : Change 1 UNIFIED FACILITIES CRITERIA - NAVY AND MARINE CORPS ENVIRONMENTAL ENGINEERING FOR FACILITY CONSTRUCTION
MIL-A-82728 Base Document:1984 ALUMINUM POWDER, ATOMIZED (FOR USE IN EXPLOSIVES)
O-E-751 Revision D:2015 ETHER, PETROLEUM; TECHNICAL GRADE
NFPA 12 : 2018 CARBON DIOXIDE EXTINGUISHING SYSTEMS
API MPM CH8.3 : 1995(R2018) MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS
NFPA 484 : 2015 COMBUSTIBLE METALS
CGA SA 24 : 2012 SAFETY ALERT - EMERGENCY MEDICAL SERVICES FILLING OXYGEN OR AIR FOR HUMAN RESPIRATION
SAE AIR 825/8 : 2012 CONTINUOUS FLOW OXYGEN SYSTEMS
SAE J2950_201202 Recommended Practices (RP) for Shipping Transport and Handling of Automotive-Type Battery System - Lithium Ion
SAE ARP1894B Useful Life Determination for Chemical Oxygen Generators
ASTM D 7326 : 2017 : REDLINE Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH<inf >2</inf>FCF<inf>3</inf>, CHF<inf>2</inf> CF<inf>3</inf>, and CO<inf >2</inf>)
SAE J3030_201507 Automotive Refrigerant Recovery/Recycling/Recharging Equipment Intended for use with Both R-1234yf and R-134a
SAE J2810_201603 HFC-134a (R-134a) Refrigerant Recovery Equipment for Mobile Automotive Air-Conditioning Systems
ASTM E 2169 : 2017 : REDLINE Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
NFPA 1 : 2018 FIRE CODE
ASME STP-PT-003 : 2005 HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES
ISA 12.13.0 : *DUPLICATE RECORD* **DUPLICATE RECORD**

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.