CGA V 1 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS
Superseded date
01-07-2019
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
V - 1 MAJOR CHANGES
FOREWORD
1 Introduction
2 Scope
3 Definitions
4 Outlet connections
5 Outlet connection pressure range
6 Valve inlet
7 Adapters
8 Medical gas connections
9 Procedure for evaluation of new connections
10 References
Section A - Outlet connections for compressed gas service
Section B - Outlet connections for SCUBA service
Section C - Outlet connections for ultra high integrity service
Section D - Pin index and threaded outlet connections for
medical gas service
Section E - Compressed gas cylinder valve inlet connections
Appendix I - Design requirements and test protocol for CGA
cylinder valve outlet connections
Appendix II - Selected international outlet specifications
(Informative)
Appendix III - Selected international outlet specifications for
medical gas mixtures (Informative)
Covers dimension drawings of 115 valve outlet connections for nearly 270 different products. Includes threaded connections, yoke outlets, and the Pin Index Safety System for flush outlet valves of the yoke type used for medical gases. Provides connections that minimize the possibility of hazardous misconnections.
| DocumentType |
Standard
|
| PublisherName |
Compressed Gas Association
|
| Status |
Superseded
|
| SupersededBy |
| CGA M 8 : 2018 | STANDARD FOR THE MANUFACTURER OF CALIBRATION GAS STANDARDS USED TO ANALYZE MEDICAL AND FOOD GASES |
| IEEE C57.21 : 2008 | REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR SHUNT REACTORS RATED OVER 500 KVA |
| 16/30299123 DC : 0 | BS EN ISO 15996 - GAS CYLINDERS - RESIDUAL PRESSURE VALVES - SPECIFICATION AND TYPE TESTING OF CYLINDER VALVES INCORPORATING RESIDUAL PRESSURE DEVICES |
| CSA Z10524-1 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| CGA C 10 : 2013 | GUIDELINES TO PREPARE CYLINDERS AND TUBES FOR GAS SERVICE AND CHANGES IN GAS SERVICE |
| MIL-STD-1411 Revision B:2010 | INSPECTION AND MAINTENANCE OF COMPRESSED GAS CYLINDERS |
| CGA SB 42 : 2010 | INCREASED PRESSURE RATING OF GAS TRAILER OUTLET CONNECTIONS |
| AWS BRH:2007 | BRAZING HANDBOOK |
| CAN/CSA-C22.2 NO. 60335-2-72:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE |
| MSS SP 105 : 2016 | INSTRUMENT VALVES FOR CODE APPLICATIONS |
| SAE AS 1066 : 2012 | MINIMUM STANDARDS FOR VALVE, HIGH PRESSURE OXYGEN, CYLINDER SHUT OFF, MANUALLY OPERATED |
| CGA V 9 : 2012 | COMPRESSED GAS CYLINDER VALVES |
| CSA/ANSI Z21.63 : 2014 | PORTABLE TYPE GAS CAMP HEATERS |
| CSA C22.2 No. 60601.2.13 : 2007 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| UNE-EN ISO 17879:2017 | Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017) |
| CGA P2-5 : 2011 | TRANSFILLING OF HIGH PRESSURE GASEOUS OXYGEN USED FOR RESPIRATION |
| CGA SB 19 : 2013 | POTENTIAL VALVE THREAD AND CYLINDER THREAD MISMATCH |
| CGA SB 10 : 2009 | PRECAUTIONS FOR CONNECTING COMPRESSED GAS CONTAINERS TO SYSTEMS |
| CGA V 11 : 2011 | GENERAL GUIDELINES FOR THE INSTALLATION OF VALVES INTO HIGH PRESSURE ALUMINUM ALLOY CYLINDERS |
| ASTM F 920 : 1993 : R1999 | Standard Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans (Withdrawn 2007) |
| EN 15202:2012 | LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| I.S. EN 15202:2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| CSA 6.25 : 2005 : INC : ADD A : 2007 : R2010 | CYLINDER CONNECTION DEVICES |
| BS EN 15202:2012 | LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| BS 341-1:1991 | Transportable gas container valves Specification for industrial valves for working pressures up to and including 300 bar |
| MIL-R-13877 Revision D:1987 | REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION |
| AHRI GUIDELINE K (I-P) : 2009 | CONTAINERS FOR RECOVERED NON-FLAMMABLE FLUOROCARBON REFRIGERANTS |
| BS EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| CGA M 5 : 2013 | GUIDE FOR HOME RESPIRATORY CARE FIRMS FILLING OR DISTRIBUTING LIQUID OXYGEN USP |
| ASTM F 1949 : 1999 : R2013 | Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles (Withdrawn 2022) |
| 16/30301299 DC : 0 | BS EN ISO 17879 - GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| 17/30362705 DC : 0 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| CSA Z10524 : 2002 | PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR MEDICAL GAS SYSTEMS |
| ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| ASTM F 882 : 1984 : R2002 | Standard Performance and Safety Specification for Cryosurgical Medical Instruments (Withdrawn 2011) |
| CSA 1.8 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| SAE AIR1059E | Oxygen Cylinder Quality, Serviceability, Maintenance Transfilling and Marking |
| ANSI Z21.81 : 2005 : INC : ADD A : 2007 : R2010 | CYLINDER CONNECTION DEVICES |
| CGA V 16 : 2016 | GUIDELINE FOR THE APPLICATION OF CGA PUBLICATIONS TO CYLINDER VALVES |
| CSA Z168.3 : 1997 | ANAESTHETIC MACHINES FOR MEDICAL USE |
| BS EN ISO 15996:2017 | Gas cylinders. Residual pressure valves. Specification and type testing of cylinder valves incorporating residual pressure devices |
| ASTM F 1949 : 1999 | Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| ASTM F 2318 : 2015 | Standard Specification for Rotary Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2024) |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| CGA 2.29 : 1997 : R2014 | HAND-HELD TORCHES FOR FUEL GASES |
| NFPA 99C : 2005 | GAS AND VACUUM SYSTEMS |
| CSA/ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| I.S. EN ISO 10297:2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014, CORRECTED VERSION 2014-11-01) |
| A-A-51128 Revision B:1999 | Torch Kit, Soldering (Propane Gas) |
| MIL-DTL-26499 Revision E:2006 | Hose Assembly, Metal, Flexible, Breathing Oxygen |
| ASTM G 175 : 2013 : REDLINE | Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications |
| CSA Z10524-1 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| CGA P 18 : 2013 | STANDARD FOR BULK INERT GAS SYSTEMS |
| CGA SB 26 : 2014 | CYLINDER CONNECTIONS ON PORTABLE LIQUID CRYOGENIC CYLINDERS |
| 15/30299570 DC : 0 | BS ISO 7195 - NUCLEAR ENERGY - PACKAGINGS FOR THE TRANSPORT OF URANIUM HEXAFLUORIDE (UF[6]) |
| CGA E 16 : 2015 | STANDARD FOR COMPRESSED GAS CHECK VALVES FOR PRESSURES UP TO 3000 PSI |
| CGA C 9 : 2013 | STANDARD COLOR MARKING OF COMPRESSED GAS CONTAINERS FOR MEDICAL USE |
| CGA V 6.1 : 2007 | STANDARD CARBON DIOXIDE TRANSFER CONNECTIONS |
| CGA S 1.3 : 2008 | PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES |
| UNE-EN 16129:2014 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| CGA SB 20 : 2006(R2013) | GENERAL INFORMATION ON QUICK-CONNECTING COUPLINGS FOR COMPRESSED GAS SERVICE |
| MIL-DTL-2 Revision G:2006 | VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR |
| MSS SP 99 : 2016 | INSTRUMENT VALVES |
| I.S. EN ISO 17879:2017 | GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17879:2017) |
| CSA Z8382 : 1994 | RESUSCITATORS INTENDED FOR USE WITH HUMANS |
| CSA Z305.1 : 0 | NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS |
| CGA P 66 : 2015 | GUIDELINE FOR THE SELECTION OF PRESSURE RELIEF DEVICES AND VALVE OUTLETS FOR UN MARKED CYLINDERS |
| EN ISO 17879:2017 | Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017) |
| CGA E 7 : 2013 | MEDICAL GAS PRESSURE REGULATORS, FLOWMETERS, AND ORIFICE FLOW SELECTORS |
| CGA S 1.1 : 2011 | PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES |
| CSA C22.2 No. 601.2.13 : 0 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF ANAESTHETIC MACHINES |
| ISO 7195:2005 | Nuclear energy Packaging of uranium hexafluoride (UF6) for transport |
| CSA 6.25 : 2005 | CYLINDER CONNECTION DEVICES |
| UNI EN 15202 : 2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| CSA W117.2 : 2012 : INC : UPD 2 : 2014 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
| ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
| UL 60335-2-72:1ED 2017-09-15 | Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use |
| CSA W117.2 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| CSA W117.2 : 2012 : INC : UPD 1 : 2013 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| CAN/CSA-W117.2-12 (R2017) | Safety in welding, cutting, and allied processes |
| ANSI L1.1 : 1981 | SAFETY AND HEALTH REQUIREMENTS FOR THE TEXTILE INDUSTRY, |
| ANSI Z1979.8 : 1979 | ANESTHESIA MACHINES FOR HUMAN USE, MINIMUM PERFORMANCE AND SAFETY REQUIREMENTS FOR COMPONENTS & SYSTEMS OF CONTINUOUS FLOW, |
| ISO 17879:2017 | Gas cylinders — Self-closing cylinder valves — Specification and type testing |
| UNI EN 16129 : 2013 | PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| CGA P 12 : 2017 | SAFE HANDLING OF CRYOGENIC LIQUIDS |
| ISO 14456:2015 | Gas cylinders — Gas properties and associated classification (FTSC) codes |
| CGA P 30 : 2013 | PORTABLE CRYOGENIC LIQUID CONTAINERS - USE, CARE, AND DISPOSAL |
| CGA V 7.1 : 2011 | STANDARD METHOD OF DETERMINING CYLINDER VALVE OUTLET CONNECTIONS FOR MEDICAL GASES |
| BS EN ISO 17879:2017 | Gas cylinders. Self-closing cylinder valves. Specification and type testing |
| CGA V 17 : 2016 | GUIDELINE FOR HANDLING AND USE OF CGA 630/710 SERIES ULTRA HIGH INTEGRITY SERVICE CONNECTIONS |
| CGA V 10 : 2017 | HIGH PRESSURE GAS TRAILER CONNECTIONS |
| ANSI Z21.81 : 2005 | CYLINDER CONNECTION DEVICES |
| ANSI Z21.81 : 2005 : INC : ADD A : 2007 : R2015 | CYLINDER CONNECTION DEVICES |
| CGA V 5 : 2008(R2013) | DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS) |
| BS EN ISO 14456:2016 | Gas cylinders. Gas properties and associated classification (FTSC) codes |
| ASTM F 1949 : 1999 : R2007 | Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles |
| ASTM F 2319 : 2004 | Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013) |
| CGA TB 9 : 2008 | GUIDELINES FOR THE PROPER HANDLING AND USE OF THE CGA 630/710 SERIES ULTRA HIGH INTEGRITY SERVICE CONNECTIONS |
| CSA B149HB : 2005 | NATURAL GAS AND PROPANE CODE HANDBOOK |
| CSA B149.2:20 | Propane storage and handling code |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| CSA 6.25 : 2005 : INC : ADD A : 2007 : R2015 | CYLINDER CONNECTION DEVICES |
| UNE-EN ISO 10297:2015 | Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01) |
| UNE-EN 15202:2012 | LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| BS EN ISO 10297 : 2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| CGA 2.29 : 1997 : R2010 | HAND-HELD TORCHES FOR FUEL GASES |
| EN ISO 14456:2016 | Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015) |
| CGA S 1.2 : 2009 | PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES |
| CGA P2-6 : 2011 | TRANSFILLING OF LIQUID OXYGEN USED FOR RESPIRATION |
| UNE-EN ISO 14456:2017 | Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015) |
| CGA P 9 : 2015 | THE INERT GASES: ARGON, NITROGEN, AND HELIUM |
| CGA P 63 : 2013 | DISPOSAL OF GASES |
| CGA TB 15 : 2009 | REQUIREMENTS FOR THE POST MANUFACTURE TARE WEIGHT MARKING OF CYLINDERS |
| CGA TB-16 : 2010 | RECOMMENDED CODING SYSTEM FOR THREADED CYLINDER OUTLETS AND THREADED VALVE INLETS |
| CGA V 6 : 2014 | STANDARD BULK REFRIGERATED LIQUID TRANSFER CONNECTIONS |
| CGA TB-14 : 2010 | TORQUE GUIDELINES FOR SEALING CGA VALVE OUTLET CONNECTIONS |
| 10/30218994 DC : 0 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| NFPA 115 : 2016 | LASER FIRE PROTECTION |
| DIN EN 16129:2013-08 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| BS ISO 14456 : 2015 | GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES |
| CGA C 6 : 2013 | STANDARD FOR VISUAL INSPECTION OF STEEL COMPRESSED GAS CYLINDERS |
| CSA Z305.3 : 0 | PRESSURE REGULATORS, GAUGES AND FLOW-METERING DEVICES FOR MEDICAL GASES |
| CSA Z305.12 : 2006 | SAFE STORAGE, HANDLING, AND USE OF PORTABLE OXYGEN SYSTEMS IN RESIDENTIAL BUILDINGS AND HEALTH-CARE FACILITIES |
| CSA 12.2 : 2002 | PROPANE FUEL SYSTEM COMPONENTS FOR USE ON HIGHWAY VEHICLES |
| CGA C 26 : 2017 | GUIDELINE FOR THE POST MANUFACTURE TARE WEIGHT MARKING OF CYLINDERS |
| AHRI GUIDELINE K : 2004 | CONTAINERS FOR RECOVERED NON-FLAMMABLE FLUOROCARBON REFRIGERANTS |
| CSA 11.3 : 2014 | PORTABLE TYPE GAS CAMP HEATERS |
| CSA/ANSI Z21.96 : 2014 | PORTABLE WATER HEATERS FOR OUTDOOR USE |
| CGA V 14 : 2011 | PERFORMANCE STANDARD FOR SEALING GASKETS USED ON CGA 870 CONNECTIONS FOR MEDICAL OXYGEN SERVICE |
| CSA 11-6 : 2014 | PORTABLE WATER HEATERS FOR OUTDOOR USE |
| I.S. EN ISO 14456:2016 | GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES (ISO 14456:2015) |
| CSA C22.2 No. 60601.2.13 :2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| I.S. EN 16129:2013 | PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| CGA V 7 : 2015 | STANDARD METHOD OF DETERMINING CYLINDER VALVE OUTLET CONNECTIONS FOR INDUSTRIAL GAS MIXTURES |
| ISO 15996:2017 | Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices |
| CSA B149.2 : 2010 : R2015 | PROPANE STORAGE AND HANDLING CODE |
| CSA B149.2:2010 | PROPANE STORAGE AND HANDLING CODE |
| DIN EN 15202:2012-09 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| CSA/ANSI Z21.103-2017 | Unvented portable type gas camp heaters for indoor and outdoor use |
| ASME B1.7 : 2006 : R2011 | SCREW THREADS: NOMENCLATURE, DEFINITIONS, AND LETTER SYMBOLS |
| ASME B1.7 : 2006 | SCREW THREADS: NOMENCLATURE, DEFINITIONS, AND LETTER SYMBOLS |
| ASME Y14.6:2001 | SCREW THREAD REPRESENTATION |
| ASME Y14.6 : 2001 : R2013 | SCREW THREAD REPRESENTATION |
| ASME Y14.6 : 2001 : R2007 | SCREW THREAD REPRESENTATION |
| ASME B1.7 : 2006 : R2016 | SCREW THREADS: NOMENCLATURE, DEFINITIONS, AND LETTER SYMBOLS |
| CSA/ANSI Z21.74-2017 | Portable refrigerators |
| CGA TB 9 : 2008 | GUIDELINES FOR THE PROPER HANDLING AND USE OF THE CGA 630/710 SERIES ULTRA HIGH INTEGRITY SERVICE CONNECTIONS |
| CGA TB-16 : 2010 | RECOMMENDED CODING SYSTEM FOR THREADED CYLINDER OUTLETS AND THREADED VALVE INLETS |
| CGA V 7.1 : 2011 | STANDARD METHOD OF DETERMINING CYLINDER VALVE OUTLET CONNECTIONS FOR MEDICAL GASES |
| CGA P-2 : 2013 | CHARACTERISTICS AND SAFE HANDLING OF MEDICAL GASES |
| CGA S 1.2 : 2009 | PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES |
| CGA P2-5 : 2011 | TRANSFILLING OF HIGH PRESSURE GASEOUS OXYGEN USED FOR RESPIRATION |
| CGA V 7 : 2015 | STANDARD METHOD OF DETERMINING CYLINDER VALVE OUTLET CONNECTIONS FOR INDUSTRIAL GAS MIXTURES |
| CGA V 5 : 2008(R2013) | DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS) |
| CGA E 7 : 2013 | MEDICAL GAS PRESSURE REGULATORS, FLOWMETERS, AND ORIFICE FLOW SELECTORS |
| CGA V 9 : 2012 | COMPRESSED GAS CYLINDER VALVES |
| CGA P2-6 : 2011 | TRANSFILLING OF LIQUID OXYGEN USED FOR RESPIRATION |
| CGA S 1.3 : 2008 | PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES |
| CGA V 6 : 2014 | STANDARD BULK REFRIGERATED LIQUID TRANSFER CONNECTIONS |
| CGA S 1.1 : 2011 | PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.