![header thumbnail](/images/publishers\csa_cover.gif)
CSA B139 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\csa_cover.gif)
INSTALLATION CODE FOR OIL-BURNING EQUIPMENT
Hardcopy , PDF
09-09-2021
English, French
01-01-2015
Preface
B139.1.0-15, General requirements for large installations
0 Introduction
1 Scope
2 Reference publications
3 Definitions
4 General requirements
5 Fuel-containing devices, piping, tubing, valves, and fuel
oil pumps
6 General requirements for above-ground fuel oil tanks
7 Tanks installed inside buildings - Capacity and protection
8 Outdoor above-ground fuel oil tanks - Capacity and
protection
9 Underground tanks and piping
10 Tank connections
11 Air for combustion and venting
12 Venting products of combustion
13 Tests
Annexes
A (normative) - Referenced product and material publications
B (normative) - Tables and figures
C (informative) - Replacement burners and replacement
combustion heads for residential oil burners
D (informative) - General recommendations for the third-party
auditor, installer, service provider, operator, and
wholesaler/retailer of equipment that burns used oil
E (informative) - Combustion safety control timing
F (informative) - Calculation of vent piping equivalent length
G (informative) - Tanks for central oil distribution systems
H (informative) - Appropriate refractory-type combustion
chamber data for gun-type furnace-conversion oil burners
I (informative) - Filling operations
J (informative) - Fuel tanks and water contamination
K (normative) - Maintenance - Above-ground tanks and
underground piping
L (normative) - Maintenance - Residential installations
M (informative) - Operations
N (informative) - Glossary
B139.1.1-15, General requirements for stationary engines
0 Introduction
1 Scope
2 Reference publications
3 Definitions
4 Engine installation
5 Engine fuel piping, tubing, and fittings
6 Tanks
7 Air supply
8 Venting products of combustion
9 Pressure test of unlisted metal exhaust stacks
B139.1.2-15, General requirements for special installations
0 Introduction
1 Scope
2 Reference publications
3 Definitions
4 Used-oil burning appliances
5 Field installation of burners
6 Central oil distribution systems
7 Construction heaters
8 Vehicle heaters
B139.2-15, Installation code for oil-burning equipment for
residential and small commercial buildings
0 Introduction
1 Scope
2 Reference publications
3 Definitions
4 Appliance installation
5 Fuel-containing devices, piping and tubing, and valves
6 Above-ground fuel oil tanks
7 Supply tanks - Capacity and protection
8 Tank connections
9 Air for combustion and venting
10 Venting products of combustion
11 Tests
12 Maintenance
Contains: (a) B139.1.0-15 - General requirements for large installations, (b) B139.1.1-15 - General requirements for stationary engines, (c) B139.1.2-15 - General requirements for special installations, and (d) B139.2-15 - Installation code for oil-burning equipment for residential and small commercial buildings.
DevelopmentNote |
Includes: B139.1.0-2015, B139.1.1-2015, B139.1.2-2015 and B139.2-2015. 2009 Edition is still available. (02/2015) French Version of 2015 Edition Issued in August 2015. Reprinted May 2016, incorporate GEN INS 1. (06/2016) Also available in (CSA B139 SERIES + ONTARIO AMENDMENTS) package. (09/2017)
|
DocumentType |
Standard
|
Pages |
260
|
PublisherName |
Canadian Standards Association
|
Status |
Superseded
|
SupersededBy |
CSA B140.2.1 : 2010 : R2014 | ATOMIZING-TYPE OIL BURNERS |
CSA B140.9.2 : 2010 : R2014 | PORTABLE, PRESSURIZED-TYPE, LIQUID-PETROLEUM-FUELLED CAMP STOVES |
CSA C22.2 No. 3 : 1988 : R2004 | ELECTRICAL FEATURES OF FUEL-BURNING EQUIPMENT |
CSA B140.11 : 1989 : R1995 | OIL/GAS-FIRED COMMERCIAL/INDUSTRIAL PRESSURE WASHERS AND STEAM CLEANERS |
CSA C445 : 0 | DESIGN AND INSTALLATION OF EARTH ENERGY HEAT PUMP SYSTEMS FOR RESIDENTIAL AND OTHER SMALL BUILDINGS |
CSA B140.2.1:2010 | ATOMIZING-TYPE OIL BURNERS |
CSA B140.11 : 1989 : R2005 | OIL/GAS-FIRED COMMERCIAL/INDUSTRIAL PRESSURE WASHERS AND STEAM CLEANERS |
CSA C22.2 No. 3 : 1988 : R2014 | ELECTRICAL FEATURES OF FUEL-BURNING EQUIPMENT |
CSA B140.7.2 : 1967 | OIL-FIRED STEAM AND HOT-WATER BOILERS FOR COMMERCIAL AND INDUSTRIAL USE |
CSA Z240 MH SERIES : 2016 | MANUFACTURED HOMES |
CSA C273.5 : 2011 | INSTALLATION OF AIR SOURCE HEAT PUMPS AND AIR CONDITIONERS |
CSA B140.0 : 2003 : R2013 | OIL-BURNING EQUIPMENT: GENERAL REQUIREMENTS |
CSA B140.1 : 1966 | VAPOURIZING-TYPE OIL BURNERS |
CSA B140.10 : 2006 | OIL-FIRED WARM-AIR HEATING APPLIANCES FOR MOBILE HOUSING AND RECREATIONAL VEHICLES |
CSA B140.4:2004 | OIL-FIRED WARM AIR FURNACES |
CSA B140.9.4 : 2010 : R2014 | PORTABLE, PRESSURIZED-TYPE, LIQUID-PETROLEUM-FUELLED LAMPS AND LANTERNS |
CSA B140.2.2 : 1971 | PRESSURE ATOMIZING OIL BURNER NOZZLES |
CSA B366.1 :2011 : INC : UPD 1 : 2014 | SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
CSA B366.1 : 2011 | SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
CSA B140.9.3 : 1986 | PORTABLE KEROSENE-FIRED HEATERS |
CSA B140.14 : 1979 | AUTOMATIC FLUE-PIPE DAMPERS FOR USE WITH OIL-FIRED APPLIANCES |
CSA B140.7 : 2005 : R2010 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
CSA B140.9.4 : 2010 | PORTABLE, PRESSURIZED-TYPE, LIQUID-PETROLEUM-FUELLED LAMPS AND LANTERNS |
CSA B140.7:2005 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
CSA B140.7 : 2005 : R2014 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
CSA B140.9.1 : 1972 | PORTABLE LIQUID FUELLED CATALYTIC APPLIANCES |
CSA B366.1 : 2011 : R2015 | SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
CSA B140.2.3 : 1981 | REPLACEMENT BURNERS AND REPLACEMENT COMBUSTION HEADS FOR RESIDENTIAL OIL BURNERS |
CSA B140.7.1 : 76(R2001) | OIL-FIRED STEAM AND HOT-WATER BOILERS FOR RESIDENTIAL USE |
CSA C273.5 : 2011 : INC : UPD 1 : 2011 | INSTALLATION OF AIR SOURCE HEAT PUMPS AND AIR CONDITIONERS |
CSA B140.12:2003 | OIL-BURNING EQUIPMENT: SERVICE WATER HEATERS FOR DOMESTIC HOT WATER, SPACE HEATING, AND SWIMMING POOLS |
CSA C273.5 : 2011 : R2015 | INSTALLATION OF AIR SOURCE HEAT PUMPS AND AIR CONDITIONERS |
CSA B140.0 : 2003 | OIL-BURNING EQUIPMENT: GENERAL REQUIREMENTS |
CSA B140.4 : 2004 : R2014 | OIL-FIRED WARM AIR FURNACES |
CGA B105 : 1993 | CODE FOR DIGESTER GAS AND LANDFILL GAS INSTALLATIONS |
CSA Z240 MM SERIES : 2016 | |
CSA B140.11 : 1989 : R2014 | OIL/GAS-FIRED COMMERCIAL/INDUSTRIAL PRESSURE WASHERS AND STEAM CLEANERS |
CSA F326 : 1991 : R2014 | RESIDENTIAL MECHANICAL VENTILATION SYSTEMS |
CSA F326 : 1991 : R2005 | RESIDENTIAL MECHANICAL VENTILATION SYSTEMS |
CSA C679 : 2002 | INSTALLATION AND MAINTENANCE OF FARM STANDBY ELECTRIC POWER |
CSA B140.7 : 2005 : R2010 : FR | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
CSA B140.12 : 2003 : R2013 | OIL-BURNING EQUIPMENT: SERVICE WATER HEATERS FOR DOMESTIC HOT WATER, SPACE HEATING, AND SWIMMING POOLS |
B365-17 | Installation code for solid-fuel-burning appliances and equipment |
CSA B140.9.2:2010 | PORTABLE, PRESSURIZED-TYPE, LIQUID-PETROLEUM-FUELLED CAMP STOVES |
CSA A405 : 0 | DESIGN AND CONSTRUCTION OF MASONRY CHIMNEYS AND FIREPLACES |
CAN/CSA-F326:1991(R2010) | Residential Mechanical Ventilation Systems<br> |
CSA F383 : 2008 : INC : SUP 1 2011 | INSTALLATION OF PACKAGED SOLAR DOMESTIC HOT WATER SYSTEMS |
CSA F383 : 2008:R2013 | INSTALLATION OF PACKAGED SOLAR DOMESTIC HOT WATER SYSTEMS |
CSA F383 :2008 | INSTALLATION OF PACKAGED SOLAR DOMESTIC HOT WATER SYSTEMS |
CSA F383 : 2008 : INC : SUP P1 : 2011 : R2013 | INSTALLATION OF PACKAGED SOLAR DOMESTIC HOT WATER SYSTEMS |
NACE SP 02 85 : 2011 | “Corrosion Control of Underground Storage Tank Systems by Cathodic Protection” |
ASME B31.1 : 2016 | POWER PIPING |
CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
ASTM D 808 : 2016 : REDLINE | Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) |
ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
CSA B140.1 : 1966 | VAPOURIZING-TYPE OIL BURNERS |
ASME B31.3:2016 | PROCESS PIPING |
CSA B140.2.3 : 1981 | REPLACEMENT BURNERS AND REPLACEMENT COMBUSTION HEADS FOR RESIDENTIAL OIL BURNERS |
CSA C22.2 No. 139 : 2013 | ELECTRICALLY OPERATED VALVES |
CGSB-43.146 : 2002 | DESIGN, MANUFACTURE AND USE OF INTERMEDIATE BULK CONTAINERS FOR THE TRANSPORTATION OF DANGEROUS GOODS |
CAN/CSA-Z662-15 | Oil and gas pipeline systems |
ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
CSA B140.14 : 1979 | AUTOMATIC FLUE-PIPE DAMPERS FOR USE WITH OIL-FIRED APPLIANCES |
CSA B140.9.1 : 1972 | PORTABLE LIQUID FUELLED CATALYTIC APPLIANCES |
NACE RP 03 75 : 2006 | FIELD-APPLIED UNDERGROUND WAX COATING SYSTEMS FOR UNDERGROUND PIPELINES: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
CSA B140.8 : 1967 | PORTABLE INDUSTRIAL OIL-FIRED HEATERS |
CSA B140.3 : 1962 | OIL BURNING STOVES AND WATER HEATERS |
UL 428B:1ED 2015-06-05 | Electrically Operated Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations Up To 20 Percent (B20), Kerosene, and Fuel Oil |
ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
CGSB-3.2 : 2017 | HEATING FUEL OIL |
NACE SP 01 69 : 2013 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
UL 429:7ED 2013-11-06 | Electrically Operated Valves |
ASTM B 43 : 2015 : REDLINE | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
CSA Z240 RV SERIES : 2014 | RECREATIONAL VEHICLES |
NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
CSA B140.9.3 : 1986 | PORTABLE KEROSENE-FIRED HEATERS |
ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
CSA Z32 : 2015 | ELECTRICAL SAFETY AND ESSENTIAL ELECTRICAL SYSTEMS IN HEALTH CARE FACILITIES |
FM 7440 : 1981 | FIRESAFE VALVES |
NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
CSA B140.2.2 : 1971 | PRESSURE ATOMIZING OIL BURNER NOZZLES |
ISO 6944-1:2008 | Fire containment — Elements of building construction — Part 1: Ventilation ducts |
CSA B140.10 : 2006 | OIL-FIRED WARM-AIR HEATING APPLIANCES FOR MOBILE HOUSING AND RECREATIONAL VEHICLES |
ASME B16.3 : 2016 | MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300 |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.