CSA Z107.9 : 2000 : R2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
STANDARD FOR CERTIFICATION OF NOISE BARRIERS
Hardcopy , PDF
31-10-2011
English
01-01-2004
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Preface
Foreword
1 Scope
2 Definitions
3 Reference Publications
4 Certification
4.1 Noise Barrier System
4.2 Noise Barrier Manufacturer/Fabricator
4.3 Project-Specific Design Details (Shop Drawings and
Related Documents)
4.4 Noise Barrier Installation
5 Design
5.1 General
5.2 Acoustics
5.2.1 Sound Transmission Class (STC)
5.2.2 Noise Reduction Coefficient (NRC)
5.3 Expansion Joints
5.4 Height
5.5 Panel Orientation
5.6 Panels with Fire Hose Access Openings
6 Materials
6.1 General
6.2 Coatings
6.3 Test Requirements for Coatings
6.3.1 Accelerated Weathering
6.3.2 Corrosion Resistance (Salt Fog Exposure)
6.3.3 Accelerated Weathering Test
6.3.4 Corrosion Resistance Test
6.4 Concrete Panels and Posts
6.4.1 Cast-in-Place
6.4.2 Precast
6.5 Steel Reinforcing
6.6 Glazing Material
6.7 Metal Components
6.8 Steel Panels
6.9 Sound-Absorptive Filler Material
6.10 Wood Components
6.11 Brick and Masonry
7 Installation
7.1 General
7.2 Tolerances
7.3 Footings
7.3.1 General
7.3.2 Footings for Posts in Earth
7.3.3 Footings for Posts in Rock
7.3.4 Concrete in Cast-in-Place Footings
7.4 Galvanizing
7.5 Calking and Flashings
7.6 Site Grading and Preparation
7.7 Field Welds
7.8 Height
7.9 Stepping of Panels
7.10 Granular Backfill and Select Subgrade Material
7.11 Masonry Walls
8 Safety
8.1 Traffic Protection during and after Construction
8.2 Fire Hydrant Access
8.3 Overhead High-Voltage Lines
9 Other Considerations
9.1 Aesthetics
9.1.1 Termination Points
9.1.2 Vegetation
9.1.3 Visual Relief
9.2 Maintenance
9.3 Underground Utilities and Drainage Crossings
10 Footing and Structural Design
10.1 Footing Design
10.2 Structural Design
Appendices
A - Structural Design Notes
B - Predicting and Determining Acoustical Performance
C - Certification
D - Bibliography
Intended as a specification of products suitable for installation as roadway noise barriers. It also specify requirements for the certification of individual barrier sites. Noise barrier design and materials are specified in this standard.
| DocumentType |
Standard
|
| Pages |
42
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
| Supersedes |
| ASTM C 423 : 2017 : REDLINE | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
| CSA O122 : 2016 | STRUCTURAL GLUED-LAMINATED TIMBER |
| CSA A82.1 : 0 | BURNED CLAY BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE) |
| CSA O112 SERIES : 0 | CSA STANDARDS FOR WOOD ADHESIVES |
| ASTM D 660 : 1993 | Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
| AASHTO GSSB : 1989 INTERIM 2002 | GUIDE SPECIFICATIONS FOR STRUCTURAL DESIGN OF SOUND BARRIERS |
| CSA F326.2 : M89 | RESIDENTIAL MECHANICAL VENTILATION SYSTEM INSTALLATION REQUIREMENTS |
| ASTM E 795 : 2016 : REDLINE | Standard Practices for Mounting Test Specimens During Sound Absorption Tests |
| ANSI/SAE Z26.1:1996 | SAFETY GLAZING MATERIALS FOR GLAZING MOTOR VEHICLES AND MOTOR VEHICLE EQUIPMENT OPERATING ON LAND HIGHWAYS - SAFETY STANDARD |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 661 : 1993 | Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| ASTM D 3963/D3963M : 2015 : REDLINE | Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars |
| CGSB 1.181 : 1999 | READY-MIXED ORGANIC ZINC-RICH COATING |
| CSA A23.4 : 2016 | PRECAST CONCRETE - MATERIALS AND CONSTRUCTION |
| ASTM G 26 : 1996 | Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Withdrawn 2000) |
| ASTM E 413 : 2016 : REDLINE | Classification for Rating Sound Insulation |
| CSA G164 : 1992 | HOT DIP GALVANIZING OF IRREGULARLY SHAPED ARTICLES |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.