CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R200800
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PARK MODEL TRAILERS
Hardcopy , PDF
13-07-2021
English, French
01-01-2013
Preface
Foreword
Z241.0, Definitions and General Safety Requirements for Park
Model Trailers
1. Scope
2. Reference Publications and Definitions
3. Requirements
4. Marking
Z241.1, Vehicular Requirements for Park Model Trailers
1. Scope
2. Reference Publications and Definitions
3. Coupling and Tongue or A-Frame
4. Running Gear
Z241.2, Construction Requirements for Park Model Trailers
1. Scope
2. Reference Publications and Definitions
3. General Requirements
4. Structural Design Requirements
5. Construction Requirements
6. Test Procedure for Roof Trusses
7. Test Procedure for Floor Assemblies
8. Marking and Instructions
Z241.3, Plumbing System Requirements for Park Model Trailers
1. Scope
2. Reference Publications and Definitions
3. Materials and Components
4. General Requirements
5. Water Distribution System
6. Drainage Systems
7. Venting Systems
8. Tests and Inspection
Z241.4, Installation Requirements for Propane Appliances and
Equipment in Park Model Trailers
1. Scope
2. Reference Publications and Definitions
3. General Requirements
4. Electrical Equipment and Wiring
5. Appliances
6. Propane Containers
7. Regulators and Connectors
8. Propane Piping, Tubing, and Fittings
9. Factory Installation of Propane Piping and Tubing
10. Connections for Relocatable Ranges
11. Leak Testing of Piping and Tubing
12. Ducting
13. Marking
14. Marking Classifications
Z241.5, Electrical Requirements for Park Model Trailers
1. Scope
2. Reference Publications and Definitions
3. General Requirements
4. Construction
5. Marking
6. Tests
Defines vehicular requirements for park model trailers, including minimum requirements for the coupling and the tongue or A-frame, and for the running gear of the trailer.
DevelopmentNote |
Includes CSA Z241.0, CSA Z241.1, CSA Z241.2, CSA Z241.3, CSA Z241.4 & CSA Z241.5. (05/2013)
|
DocumentType |
Standard
|
Pages |
160
|
ProductNote |
Reconfirmed EN
|
PublisherName |
Canadian Standards Association
|
Status |
Superseded
|
CSA O437.0 : M85 | WAFERBOARD AND STRANDBOARD |
CSA/ANSI Z21.10.1 : 2014 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
IAPMO TS 15 : 2006 | HAND ACTUATED WATER PUMPS |
CSA B137.3 : 2009 GEN INS 1 11 | RIGID POLYVINYLCHLORIDE (PVC) PIPE AND FITTINGS FOR PRESSURE APPLICATIONS |
CSA C22.2 No. 49 : 2014 | FLEXIBLE CORDS AND CABLES |
CSA O86 : 2014 | ENGINEERING DESIGN IN WOOD |
CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
CSA S157 : 2005 | STRENGTH DESIGN IN ALUMINUM |
CSA S16 : 2014 | DESIGN OF STEEL STRUCTURES |
CGA 8.3 : 2015 | THERMOPLASTIC HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS |
CSA O437 SERIES : 1993 | STANDARDS ON OSB AND WAFERBOARD |
CSA O325.0 : 0 | CONSTRUCTION SHEATHING |
CSA B137.10 : 2009 GEN INS 1 11 | CROSSLINKED POLYETHYLENE/ALUMINUM/CROSSLINKED POLYETHYLENE (PEX-AL-PEX) COMPOSITE PRESSURE-PIPE SYSTEMS |
CSA A247 : 0 | INSULATING FIBREBOARD |
SAE J 1128 : 2015 | LOW VOLTAGE PRIMARY CABLE |
CSA B1800 SERIES : 2015 | THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM |
NSF 24 : 2015 | PLUMBING SYSTEM COMPONENTS FOR RECREATIONAL VEHICLES |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
CSA 6.10 : 2015 | CONNECTORS FOR GAS APPLIANCES |
ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
CGSB 51.32 : M77 | SHEATHING, MEMBRANE, BREATHER TYPE |
CSA 4.1 : 2014 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
CGA 8.1 : 2015 | ELASTOMERIC COMPOSITE HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS |
ANSI Z21.19-2014/CSA 1.4-2014 | REFRIGERATORS USING GAS FUEL |
ASTM A 539 : 1999 | Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines (Withdrawn 2004) |
IAPMO TS 14 : 2006 | ELECTRIC WATER PUMPS FOR USE IN RECREATIONAL VEHICLES |
CSA 6.9 : 2014 | QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES |
CSA Z240 MH SERIES : 2016 | MANUFACTURED HOMES |
CSA B137.9 : 2009 GEN INS 1 11 | POLYETHYLENE/ALUMINUM/POLYETHYLENE (PE-AL-PE) COMPOSITE PRESSURE-PIPE SYSTEMS |
CSA C22.2 No. 100 : 2014 | MOTORS AND GENERATORS |
CSA B181.2 : 2011 GEN INS 1 11 | POLYVINYLCHLORIDE (PVC) AND CHLORINATED POLYVINYLCHLORIDE (CPVC) DRAIN, WASTE, AND VENT PIPE AND PIPE FITTINGS |
AHA A208.1 : 2016 | PARTICLEBOARD STANDARD |
CSA Z240 RV SERIES : 2014 | RECREATIONAL VEHICLES |
CSA B181.1 : 2011 GEN INS 1 11 | ACRYLONITRILE-BUTADIENE-STYRENE (ABS) DRAIN, WASTE, AND VENT PIPE AND PIPE FITTINGS |
CSA/ANSI Z21.86-2016/CSA 2.32-2016 | Vented gas-fired space heating appliances |
ANSI Z21.19 : 2014 | REFRIGERATORS USING GAS FUEL |
CSA B125 : 2001 | PLUMBING FITTINGS |
IAPMO TS 13 : 2014 | WATER FILL CAPS FOR RECREATIONAL VEHICLES |
CSA 2.15 : 2016 | GAS-FIRED DOMESTIC LIGHTING APPLIANCES |
CSA B45.0 : 2002 | PLUMBING FIXTURES - GENERAL REQUIREMENTS FOR PLUMBING FIXTURES |
CSA B137.5 : 2009 GEN INS 1 11 | CROSSLINKED POLYETHYLENE (PEX) TUBING SYSTEMS FOR PRESSURE APPLICATIONS |
ANSI Z21.24 : 2015 | CONNECTORS FOR GAS APPLIANCES |
CSA S307 : 0 | LOAD TEST PROCEDURE FOR WOOD ROOF TRUSSES FOR HOUSES AND SMALL BUILDINGS |
CSA 1.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
CSA B137.6 : 2009 GEN INS 1 11 | CHLORINATED POLYVINYLCHLORIDE (CPVC) PIPE, TUBING, AND FITTINGS FOR HOT- AND COLD-WATER DISTRIBUTION SYSTEMS |
ASME B16.3 : 2016 | MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.