DD CLC/TS 62046:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety of machinery. Application of protective equipment to detect the presence of persons
Hardcopy , PDF
13-07-2018
English
30-09-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 Selection of protective measures
4.1 Procedure (relationship with ISO 12100 (all parts))
4.2 Machine characteristics
4.2.1 Suitability of protective equipment
4.2.2 Suitability of protective equipment as a trip device
4.3 Environmental characteristics
4.4 Uses of protective equipment
4.4.1 General
4.4.2 Trip device
4.4.3 Presence sensing device
4.4.4 Combination trip and presence sensing device
4.5 Human characteristics
4.5.1 General
4.5.2 Approach speed (K)
4.5.3 Penetration/encroachment factor (C)
4.5.4 Ability to circumvent protective equipment
4.6 Protective equipment characteristics
4.6.1 ESPEs
4.6.2 Pressure sensitive mats and floors
4.7 Machine control system functions associated with the
application of protective equipment
4.7.1 General
4.7.2 Stopping performance monitoring (SPM)
4.7.3 Muting
4.7.4 Reinitiation of cyclic operation by the protective
equipment
4.7.5 Start interlock
4.7.6 Restart interlock
4.7.7 Blanking
4.7.8 External Device Monitoring (EDM)
4.7.9 Provision of machine control functions
5 General application requirements
5.1 Positioning and configuration of the protective equipment
detection zone
5.2 Integration with the safety-related control system
5.3 Performance of protective equipment
5.3.1 General
5.3.2 Classification of protective equipment
5.4 Stopping performance monitoring
5.5 Muting
5.5.1 General
5.5.2 Muting to allow access by persons
5.5.3 Muting to allow access by materials
5.5.4 Mute dependent override
5.6 Reinitiation of cyclic operation by the protective equipment
5.6.1 General
5.6.2 Particular requirements for press applications
5.7 Start interlock
5.8 Restart interlock
5.9 Blanking
6 Particular application requirements for specific protective equipment
6.1 AOPDs
6.1.1 General
6.1.2 Light beam device(s)
6.1.3 Light curtains
6.2 AOPDDRs
6.3 PIPDs
6.3.1 General
6.3.2 Mobile applications
6.4 Pressure-sensitive mats and floors
6.4.1 Pressure sensitive floors
6.4.2 Pressure sensitive mats
7 Inspection and test
7.1 General
7.2 Initial inspection and test
7.3 Periodic inspection and test
7.4 Functional checks
8 Information for safe use
Annex A (informative) - Examples of interfacing ESPEs to a machine
Annex B (informative) - Summary of minimum type test requirements
for various protective equipment
Annex C (informative) - Application examples
Annex D (informative) - Protective devices for the detection of the
position of a person
Annex E (informative) - Additional recommendations for the application
of AOPDDRs
Annex F (informative) - Additional recommendations for the
configuration of photoelectric muting sensors when
used to allow access by materials
Annex G (informative) - Periodic test intervals for Type 2 ESPE
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Bibliography
Describes requirements for the selection, positioning, configuration and commissioning of protective equipment to detect the presence of persons in order to protect those persons from dangerous part(s) of machinery in industrial applications.
| Committee |
MCE/3
|
| DevelopmentNote |
Supersedes 06/30155798 DC. (09/2008)
|
| DocumentType |
Standard
|
| Pages |
106
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
It specifies requirements for the selection, positioning, configuration and commissioning of protective equipment to detect the presence of persons in order to protect those persons from dangerous part(s) of machinery in industrial applications. This technical specification covers the application of electro-sensitive protective equipment (ESPE) specified in IEC 61496 (all parts) and pressure sensitive mats and floors specified in ISO 13856-1. It takes into account the characteristics of the machinery, the protective equipment, the environment and human interaction by persons of 14 years and older. It constitutes a general technical revision of the first edition, and includes further examples of interfacing and muting techniques.
| Standards | Relationship |
| CLC/TS 62046:2008 | Identical |
| PD 5304:2014 | Guidance on safe use of machinery |
| PD 5304:2005 | GUIDANCE ON SAFE USE OF MACHINERY |
| ISO 13855:2010 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| CLC/TS 61496-2:2006 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| EN 1525:1997 | Safety of industrial trucks - Driverless trucks and their systems |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| IEC TR 62513:2008 | Safety of machinery - Guidelines for the use of communication systems in safety-related applications |
| ISO 13852:1996 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 13851:2002 | Safety of machinery Two-hand control devices Functional aspects and design principles |
| CLC/TS 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| IEC 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| EN 62061:2005/A2:2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| ISO 13856-1:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 1760-3:2004+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| IEC 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.