DEFSTAN 07-254(PT2)/1(2000) : 2000
|
DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 2: REDUCTION OF INTERNAL AIRBORNE NOISE |
BS EN 1978:1998
|
Copper and copper alloys. Copper cathodes |
BS EN 1653:1998
|
Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
DEFSTAN 02-830(PT1)/2(2002) : 2002 AMD 1 2003
|
REQUIREMENTS FOR GUNMETAL INGOTS AND CASTINGS - PART 1: GUNMETAL INGOTS AND CLASS 3 GUNMETAL SAND CASTINGS |
DEFSTAN 02-747(PT2)/2(2004) : 2004
|
REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 2: NICKEL ALUMINIUM BRONZE NAVAL ALLOY INGOTS AND SAND CASTINGS WITH WELDING PERMITTED TO THE WETTED SURFACE |
BS EN 10222-4:2017
|
Steel forgings for pressure purposes Weldable fine grain steels with high proof strength |
BS EN 10028-5:2017
|
Flat products made of steels for pressure purposes Weldable fine grain steels, thermomechanically rolled |
BS EN 10217-4:2002
|
Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties |
BS EN 10028-7:2007
|
Flat products made of steels for pressure purposes Stainless steels |
BS EN 1676:2010
|
Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications |
DEFSTAN 07-251/1(2000) : 2000
|
REQUIREMENTS FOR THE PRESERVATION AND PAINTING OF COMPARTMENTS IN SURFACE SHIPS - CATEGORY 2 |
DEFSTAN 02-862(PT2)/1(2000) : 2000
|
FASTENERS - PART 2: FERROUS |
BS EN 10222-1:2017
|
Steel forgings for pressure purposes General requirements for open die forgings |
DEFSTAN 02-849/1(2000) : 2000
|
STEEL CASTINGS FOR STRUCTURAL, ENGINEERING AND PRESSURE PURPOSES |
ASTM B 338 : 2017 : REDLINE
|
Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
BS MA 18:1973
|
Specification for salt water piping systems in ships |
ASTM B 265 : 2015 : REDLINE
|
Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
DEFSTAN 08-123/1(2000) : 2000
|
REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2 |
BS EN 10048:1997
|
Hot rolled narrow steel strip. Tolerances on dimensions and shape |
DEFSTAN 02-743(PT5)/1(2000) : 2000
|
PIPE MANIPULATION - PART 5: BRAZING |
DEFSTAN 02-341(PT1)/1(2000) : 2000
|
REQUIREMENTS FOR CLEANING OF ITEMS, COMPONENTS AND EQUIPMENT FOR FLUID SYSTEMS - PART 1: CLEANING CATEGORY 2 |
BS 2871-1:1971
|
Specification for copper and copper alloys. Tubes Copper tubes for water, gas and sanitation |
BS EN 10222-5:2017
|
Steel forgings for pressure purposes Martensitic, austenitic and austenitic-ferritic stainless steels |
BS EN 10028-6:2017
|
Flat products made of steels for pressure purposes Weldable fine grain steels, quenched and tempered |
DEFSTAN 02-723/1(2000) : 2000
|
REQUIREMENTS FOR MARKER PLATES |
BS EN 10217-2 : 2002
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
DEFSTAN 08-120/1(2000) : 2000
|
REQUIREMENTS FOR DETERMINING THE SHOCK STRENGTH OF EQUIPMENT - CATEGORY 2 |
BS EN 10095:1999
|
Heat resisting steels and nickel alloys |
DEFSTAN 02-747(PT3)/1(2000) : 2000
|
REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 3: NICKEL ALUMINIUM BRONZE COMMERCIAL ALLOY INGOTS AND SAND CASTINGS |
DEFSTAN 08-118(PT1)/1(2000) : 2000
|
DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 1: REDUCTION OF NOISE RADIATED UNDERWATER |
DEFSTAN 02-330/1(2000) : 2000
|
REQUIREMENTS FOR MAIN STEAM CONDENSERS IN NUCLEAR POWERED SUBMARINES CATEGORY 2 |
BS EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape |
BS EN 10217-6:2002
|
Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties |
BS EN 10028-1:2017
|
Flat products made of steels for pressure purposes General requirements |
DEFSTAN 02-863/1(2000) : 2000
|
REQUIREMENTS FOR THE CLASSIFICATION, DIMENSIONS, TOLERANCES AND GENERAL STANDARDS OF ACCEPTANCE FOR COPPER AND NICKEL ALLOY CASTINGS |
DEFSTAN 02-387/2(2001) : 2001
|
REQUIREMENTS FOR CHEMICAL CLEANING OF CHILLED WATER SYSTEMS FOR HM SURFACE SHIPS, SUBMARINES AND ROYAL FLEET AUXILIARY VESSELS |
BS EN 10028-3:2017
|
Flat products made of steels for pressure purposes Weldable fine grain steels, normalized |
DEFSTAN 02-779(PT3)/1(2000) : 2000
|
REQUIREMENTS FOR 90/10 COPPER NICKEL ALLOY MATERIAL - PART 3: TUBES CATEGORY 2 |
DEFSTAN 02-833(PT1)/1(2000) : 2000
|
REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 1: SHEET, STRIP AND PLATE |
BS EN 1654:1998
|
Copper and copper alloys. Strip for springs and connectors |
DEFSTAN 02-747(PT1)/1(2000) : 2000
|
REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 1: NICKEL ALUMINIUM BRONZE NAVAL ALLOY CENTRIFUGALLY CAST |
BS EN 10216-3:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
DEFSTAN 02-722/1(2000) : 2000
|
REQUIREMENTS FOR THE PREPARATION, IDENTIFICATION AND MANAGEMENTS OF DRAWINGS |
BS EN 1652:1998
|
Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
DEFSTAN 02-791(PT1)/1(2000) : 2000
|
REQUIREMENTS FOR WELDABLE STRUCTURAL STEELS - PART 1: MILD STEEL - PLATE, SECTIONS AND BARS |
BS EN 1559-4:2015
|
Founding. Technical conditions of delivery Additional requirements for aluminium alloy castings |
DEFSTAN 07-259/1(2000) : 2000
|
REQUIREMENTS FOR COPPER TUBES |
DEFSTAN 02-703/1(2000) : 2000
|
THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
DEFSTAN 02-374/1(2000) : 2000
|
RUBBER FLEXIBLE PIPES AND BELLOWS FOR USE IN SUBMARINES CATEGORY 2 |
BS EN 10028-2:2017
|
Flat products made of steels for pressure purposes Non-alloy and alloy steels with specified elevated temperature properties |
BS EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape |
BS EN 10217-5:2002
|
Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 10028-4:2017
|
Flat products made of steels for pressure purposes Nickel alloy steels with specified low temperature properties |
DEFSTAN 02-862(PT1)/1(2000) : 2000
|
FASTENERS - PART 1: GENERAL |
DEFSTAN 07-252/1(2000) : 2000
|
REQUIREMENTS FOR THE PREPARATION AND PAINTING OF SUBMARINES - CATEGORY 2 |
DEFSTAN 02-345/1(2000) : 2000 AMD 1 2002
|
REQUIREMENTS FOR FLEXIBLE RUBBER PIPE ASSEMBLIES AND BELLOWS FOR USE IN SYSTEMS FROM VACUUM TO 10 BAR |
BS 2871-2:1972
|
Specification for copper and copper alloys. Tubes Tubes for general purposes |
DEFSTAN 02-780(PT2)/1(2000) : 2000
|
REQUIREMENTS FOR 70/30 COPPER NICKEL ALLOY MATERIAL - PART 2: FORGINGS, FORGING STOCK RODS AND SECTIONS CATEGORY 2 |
DEFSTAN 07-247/1(2000) : 2000
|
SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - CATEGORY 2 |
DEFSTAN 02-830(PT2)/2(2002) : 2002
|
REQUIREMENTS FOR GUNMETAL INGOTS AND CASTINGS - PART 2: CONTINUOUSLY CAST |
BS EN 10217-3:2002
|
Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
DEFSTAN 02-310/1(2000) : 2000
|
REQUIREMENTS FOR THE MANUFACTURE OF COMMERCIALLY PURE TITANIUM SEAMLESS TUBES TYPE A - HEAT EXCHANGER TYPE B - GENERAL PURPOSE |
BS EN 1706:2010
|
Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties |
DEFSTAN 02-780(PT3)/1(2000) : 2000
|
REQUIREMENTS FOR 70/30 COPPER NICKEL ALLOY MATERIAL - PART 3: TUBES CATEGORY 2 |
BS EN 12451:2012
|
Copper and copper alloys. Seamless, round tubes for heat exchangers |
BS EN 10216-1:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
DEFSTAN 08-103(PT2)/1(2000) : 2000
|
REQUIREMENTS FOR MAINTENANCE ENVELOPES AND REMOVAL ROUTES - CATEGORY 2 - PART 2: REQUIREMENTS FOR SUBMARINES |
DEFSTAN 08-162/1(2003) : 2003
|
LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS AND SUBMARINES - CATEGORY 2 |
BS EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
BS EN 10222-2:2017
|
Steel forgings for pressure purposes Ferritic and martensitic steels with specified elevated temperatures properties |
BS EN 10217-1:2002
|
Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
DEFSTAN 02-102(PT1)/2(2000) : 2000
|
REQUIREMENTS FOR AIR CONDITIONING & VENTILATION - PART 1: HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES |
BS 3076:1989
|
Specification for nickel and nickel alloys: bar |
BS EN 10216-4:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
BS 2871-3:1972
|
Specification for copper and copper alloys. Tubes Tubes for heat exchangers |
DEFSTAN 02-743(PT1)/1(2000) : 2000
|
PIPE MANIPULATION - PART 1: BENDING OF PIPES CATEGORY 2 |
BS EN 10259:1997
|
Cold-rolled stainless and heat resisting steel wide strip and plate/sheet. Tolerances on dimensions and shape |
BS EN 10216-2:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
DEFSTAN 02-833(PT2)/1(2000) : 2000
|
REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
BS EN 10258:1997
|
Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape |
BS EN 1976:2012
|
Copper and copper alloys. Cast unwrought copper products |
DEFSTAN 02-360/2(2001) : 2001
|
GUIDANCE TO THE SELECTION OF LOW PRESSURE METRIC STANDARD VALVES |
BS EN 1559-1:2011
|
Founding. Technical conditions of delivery General |
DEFSTAN 02-375/1(2000) : 2000
|
VALVE DESIGN AND MANUFACTURE CATEGORY 2 |
DEFSTAN 07-253(PT1)/1(2000) : 2000
|
REQUIREMENTS FOR 70/30 COPPER NICKEL ALLOY - CATEGORY 2 - PART 1: SHEET, STRIP, PLATE |
BS EN 10222-3:2017
|
Steel forgings for pressure purposes Nickel steels with specified low temperature properties |
DEFSTAN 02-302(PT1)/1(2000) : 2000
|
REQUIREMENTS FOR MAINTENANCE ENVELOPES AND REMOVAL ROUTES - PART 1: SURFACE SHIPS CATEGORY 2 |
DEFSTAN 66-2/4(2003) : 2003
|
GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) |
DEFSTAN 02-747(PT4)/2(2005) : 2005
|
REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 4: NICKEL ALUMINIUM BRONZE NAVAL ALLOY SAND CASTINGS WITH WELDING RESTRICTED TO THE NON-WETTED SURFACE (CLASS 1 AND 2 CASTINGS ONLY) |