DEFSTAN 81-101/3(2016) : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
REUSABLE WATER VAPOUR RESISTANT BAGS FOR ENGINE CHANGE UNITS, PROPULSION UNITS, AND ASSOCIATED EQUIPMENT
14-02-2017
29-08-2016
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Abbreviations
6 Design
7 Test Requirements
8 Markings
9 Information to be supplied by the Purchaser
10 Packaging
Annex A - Method of Test for the Determination of Resistance of
Barrier Material to Fluids
Annex B - Method of Test for the Determination of Change of Weight
of Barrier Material after Immersion in Fluids
Annex C - Method of Test for the Determination of Welding Efficiency
Annex D - Method of Test for the Determination of Separation Strength
of Closure
Annex E - Method of Test for the Determination of Water Vapour
Transmission Rate of Closure
Annex F - Method of Test for the Determination of Operational Temperature
Range of Closure
Annex G - Details of Instruction Card
Describes requirements for robust or semi-robust water vapour resistant (WVR) bags used in military packaging and storage applications.
DevelopmentNote |
Supersedes DEFSTAN 81-101/2(2008). (08/2016)
|
DocumentType |
Standard
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
DEFSTAN 81-041(PT2)/9(2017) : 2017 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
BS 381C:1996 | Specification for colours for identification, coding and special purposes |
DEFSTAN 81-41(PT3)/6(2014) : 2014 | PACKAGING OF DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TESTING |
BS 2782-3:Methods 320A to 320F:1976 | Methods of testing plastics. Mechanical properties Tensile strength, elongation and elastic modulus |
BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
BS 2782-1:Method 140D:1997 | Methods of testing plastics. Thermal properties Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method) |
DEFSTAN 81-41(PT4)/8(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 4: SERVICE PACKAGING INSTRUCTION SHEET (SPIS) |
DEFSTAN 81-41(PT2)/8(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
DEFSTAN 91-98/2(2001) : 2001 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 7.5 CST NATO CODE: O-149 JOINT SERVICE DESIGNATION: OX-38 |
DEFSTAN 81-41(PT6)/9(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
BS EN ISO 6383-1:2015 | Plastics. Film and sheeting. Determination of tear resistance Trouser tear method |
BS 3177:1959 | Method for determining the permeability to water vapour of flexible sheet materials used for packaging |
DEFSTAN 68-10/5(2003) : 2003 | CORROSION PREVENTIVE: WATER DISPLACING NATO CODE: C-634 JOINT SERVICE DESIGNATION: PX-24 |
BS 2782-5:Method 540G:1995 | Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. Open flame carbon-arc lamps |
BS EN ISO 4892-1:2016 | Plastics. Methods of exposure to laboratory light sources General guidance |
DEFSTAN 91-4/8(2008) : 2008 | FUEL, NAVAL DISTILLATE, NATO CODE: F-76, JOINT SERVICE DESIGNATION: DIESO F-76 |
DEFSTAN 81-132/2(2004) : 2004 | PAPER, HUMIDITY INDICATOR, COBALT CHLORIDE |
BS EN ISO 176:2005 | Plastics. Determination of loss of plasticizers. Activated carbon method |
BS EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics. Determination of tear resistance Constant rate of tear methods |
DEFSTAN 81-41(PT1)/8(2014) : 2014 | PACKAGING OF DEFENCE MATERIAL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS |
DEFSTAN 91-100/3(2001) : 2001 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5CST NATO CODE: O-160 JOINT SERVICE DESIGNATION: OX-26 |
BS 2782-1:Method 150B:1976 | Methods of testing plastics. Thermal properties Determination of cold flex temperature of flexible polyvinyl compound |
DEFSTAN 91-87/5(2005) : 2005 | TURBINE FUEL, AVIATION KEROSINE TYPE: CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-34 JOINT SERVICE DESIGNATION: AVTUR/FSII |
BS 2782-8:Method 820A:1996 | Methods of testing plastics. Other properties Determination of water vapour transmission rate (dish method) |
BS 2739:1975 | Specification for thick PVC sheeting (calendered, flexible, unsupported) |
BS EN 14469-4:2004 | Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Determination of bleeding of colouring materials |
SAE J1899_201108 | LUBRICATING OIL, AIRCRAFT PISTON ENGINE (ASHLESS DISPERSANT) |
DEFSTAN 91-90/2(2006) : 2006 | GASOLINE, AVIATION: GRADES 80/87, 100/130 AND 100/130 LOW LEAD - JOINT SERVICE DESIGNATION: AVGAS 80, AVGAS 100 AND AVGAS 100LL |
DEFSTAN 81-75/3(2005) : 2005 | BARRIER MATERIAL, ALUMINIUM FOIL LAMINATE, FLEXIBLE, HEAT SEALABLE, WATER-VAPOUR RESISTANT |
DEFSTAN 91-48/2(1997) : 1997 | HYDRAULIC FLUID, PETROLEUM: SUPERCLEAN NATO CODE: H-515 JOINT SERVICE DESIGNATION: OM-15 HYDRAULIC FLUID, PETROLEUM: NORMAL NATO CODE: H-520 JOINT SERVICE DESIGNATION: OM-18 |
DEFSTAN 91-94/2(2001) : 2001 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 3 CST JOINT SERVICE DESIGNATION: OX-7 |
BS 2782-1:Method 150C:1983 | Methods of testing plastics. Thermal properties Determination of low temperature extensibility of flexible polyvinyl chloride sheet |
DEFSTAN 91-101/3(2001) : 2001 AMD 1 2002 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5 CST NATO CODE: O-156 JOINT SERVICE DESIGNATION: OX-27 AND OX-28 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.