DIN 13-14:1982-08
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ISO METRIC SCREW THREADS - BASIS OF THE TOLERANCE SYSTEM FOR SCREW THREADS 1 MM NOMINAL DIAMETER AND LARGER
01-11-1999
12-01-2013
1 Nnwendungsbereich und Zweck
2 Grundlagen des Toleranzsystems
3 Begriffe, Massbuchstaben, Kurzzeichen
4 Bezeichnung
5 Einschraublängen, Einschraubgruppen
6 Empfohlene Genauigkeitsgrade
7 Empfohlene Toleranzfelder
8 Form am Gewindegrund
9 Formeln
Specifies a tolerance system for screw threads from 1 mm diameter upwards in accordance with DIN 13 Part 1 to Part 11 with a basic profile of ISO metric screw threads in accordance with DIN 13 Part 19.
DevelopmentNote |
Supersedes DIN 13 (07/2004)
|
DocumentType |
Standard
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ISO 965-1:2013 | Similar to |
SNV DIN 13-14 : 1982 | Identical |
DIN ISO 6410-2:1993-12 | TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - SCREW THREAD INSERTS |
DIN ISO 6410-3:1993-12 | Technical drawings; screw threads and threaded parts; simplified representation; identical with ISO 6410-3:1993 |
DIN EN 3237:1998-02 | AEROSPACE SERIES - INSERTS, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100 HT (INCONEL 718) - SILVER PLATED INTERNAL THREAD |
DIN ISO 12240-4:1999-07 | SPHERICAL PLAIN BEARING - PART 4: SPHERICAL PLAIN BEARING ROD ENDS |
DIN 513-1:1985-04 | METRIC BUTTRESS THREADS; THREAD PROFILES |
DIN 13-13:1983-10 | ISO METRIC SCREW THREADS - SELECTED SIZES FOR SCREWS, BOLTS AND NUTS FROM 1 TO 52 MM SCREW THREAD DIAMETER AND LIMITS OF SIZES |
DIN 49524:1980-06 | D-TYPE FUSE-BASE FOR FRONT CONNECTION D 01, D 02, D 03, 380 V |
DIN 13-17:1987-01 | ISO GENERAL PURPOSE METRIC SCREW THREADS - GAUGES AND GAUGING |
DIN 975:1986-09 | THREADED RODS |
DIN ISO 1502:1996-12 | ISO GENERAL PURPOSE METRIC SCREW THREADS - GAUGES AND GAUGING |
BWB TL 4030-0009 : 1ED 1988 | SHACKLE, ANCHOR, NON-MAGNETIZABLE |
DIN 13-15:1982-08 | ISO METRIC SCREW THREADS - FUNDAMENTAL DEVIATIONS AND TOLERANCES FOR SCREW THREADS FROM 1 MM NOMINAL DIAMETER AND LARGER |
DIN 6630:1985-08 | PACKAGING SCREW THREADS FOR SCREWING UP PROFILES; DESIGN PROFILES AND SIZES |
DIN 267-9:1979-08 | MECHANICAL FASTENERS - TECHNICAL CONDITIONS OF DELIVERY, COMPONENTS WITH ELECTROPLATED COATINGS |
DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
DIN 13-27:1983-12 | ISO METRIC SCREW THREADS - COARSE AND FINE SCREW THREADS FROM 1 TO 355 MM SCREW THREAD DIAMETER - DEVIATIONS |
DIN ISO 6410-1:1993-12 | TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - GENERAL CONVENTIONS |
DIN 477-6:1983-03 | GAS CYLINDER VALVES - TEST PRESSURES 300 BAR AND 450 BAR, WITH CYLINDRICAL THREAD FOR VALVE STEM AND GAS CYLINDER NECK FOR BREATHING APPARATUS - SIZES, THREADS |
DIN 7952-1:1986-07 | SHEET METAL ANCHORAGE WITH THREADS; DIMENSIONS |
DIN 49525-1:1980-03 | D-TYPE FUSE CARRIERS D 01, D 02, D 03, 380 V |
DIN EN 22857:1990-07 | GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES; MANUFACTURING TOLERANCES ON THE THREADED PORTION |
DIN EN 3236:1998-02 | AEROSPACE SERIES - INSERTS, THIN WALL, SELF-LOCKING, SHORT, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - SILVER PLATED INTERNAL THREAD |
DIN 3871:1995-10 | NON-SOLDERING AND SOLDERING COMPRESSION COUPLINGS - SOCKET UNIONS |
DIN 6349-5:1978-03 | KEY-TYPE THREE-JAW DRILL CHUCKS; TECHNICAL CONDITIONS OF DELIVERY |
DIN 13-12:1988-10 | ISO METRIC SCREW THREADS - 1 MM TO 300 MM DIAMETER COARSE AND FINE PITCH THREADS - SELECTED DIAMETERS AND PITCHES |
DIN 13-15:1982-08 | ISO METRIC SCREW THREADS - FUNDAMENTAL DEVIATIONS AND TOLERANCES FOR SCREW THREADS FROM 1 MM NOMINAL DIAMETER AND LARGER |
DIN 13-26:2005-08 | ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm |
DIN 13-17:1987-01 | ISO GENERAL PURPOSE METRIC SCREW THREADS - GAUGES AND GAUGING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.