DIN 28054-1:2000-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CHEMICAL APPARATUS - COATING WITH ORGANIC MATERIALS FOR METALLIC COMPONENTS - PART 1: REQUIREMENTS AND TESTING
Available format(s)
Hardcopy , PDF
Superseded date
01-02-2007
Language(s)
English
Published date
12-01-2013
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Anforderungen
5 Prüfungen
Anhang A (informativ) Angaben des Beschichtungsstoffherstellers
für Beschichtungsstoffe
Anhang B (informativ) Angaben des Beschichtungsherstellers
für Beschichtungen
Describes requirements for and methods of testing of organic coatings applied to metallic process engineering equipment that will come in contact with chemical substances. Used for the purposes of quality control.
| DevelopmentNote |
Supersedes DIN 28054. (09/2000)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| DIN 53214:1982-02 | TESTING OF PAINTS AND VARNISHES; DETERMINATION OF RHEOGRAMS AND VISCOSITIES BY ROTATIONAL VISCOMETERS |
| EN 24624 : 1992 | PAINTS AND VARNISHES - PULL-OFF TEST |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| DIN IEC 60093 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
| ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
| EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
| DIN 28053:1997-04 | CHEMICAL APPARATUS - ORGANIC COATINGS AND LININGS ON METAL COMPONENTS - REQUIREMENTS FOR METAL SURFACES |
| DIN 28054-5:1996-12 | CHEMICAL APPARATUS - ORGANIC COATINGS ON METAL COMPONENTS - PART 5: POWDER COATING |
| DIN 50982-3:1987-08 | PRINCIPLES OF COATING THICKNESS MEASUREMENT - SELECTION CRITERIA AND BASIC MEASUREMENT PROCEDURES |
| DIN EN 59:2016-06 | GLASS REINFORCED PLASTICS - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A BARCOL HARDNESS TESTER |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| DIN 28054-2:1992-01 | CHEMICAL APPARATUS - ORGANIC COATINGS ON METAL COMPONENTS - LAMINATE COATINGS |
| EN ISO 2064:2000 | Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
| DIN EN ISO 2360:2016-05 (Draft) | NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017) |
| DIN 28051:1997-07 | CHEMICAL APPARATUS - ORGANIC COATINGS AND LININGS ON METAL COMPONENTS - DESIGN OF METAL COMPONENTS |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| DIN 28055-2:2002-04 | CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 2: PROOF OF SUITABILITY AND TESTING |
| HD 429 : 200S1 | METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
| EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| DIN EN ISO 12944-1:2016-02 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION (ISO 12944-1:2017) |
| DIN EN ISO 2409:2013-06 | PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
| DIN EN ISO 2431:2012-03 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011) |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| DIN-Fachbericht 28:2002 | CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - TESTING OF SURFACES BEFORE APPLICATION OF COATING MATERIALS FOR CONTAINMENTS THAT CANNOT BE DETECTED VISUALLY |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| DIN 28054-4:1995-10 | CHEMICAL APPARATUS - ORGANIC COATINGS ON METAL COMPONENTS - PART 4: SPRAY APPLIED COATINGS |
| DIN EN 1081:1998-04 | RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE |
| EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| DIN EN ISO 2178:2015-01 (Draft) | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| DIN EN ISO 3251:2008-06 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| DIN 55990-3:1979-12 | TESTING OF PAINTS, VARNISHES AND SIMILAR COATING MATERIALS; POWDER COATINGS, DETERMINATION OF DENSITY |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| DIN 53217-2:1991-03 | DETERMINATION OF DENSITY OF PAINTS, VARNISHES AND SIMILAR COATING MATERIALS BY THE PYKNOMETER METHOD |
| DIN 28054-3:1994-06 | CHEMICAL APPARATUS - ORGANIC COATINGS ON METAL COMPONENTS - TROWEL APPLIED COATINGS |
| DIN EN ISO 12944-4:2016-07 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017) |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| DIN EN ISO 8503-2:2012-06 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| DIN 16945:1989-03 | REACTION RESINS - REACTANTS AND REACTION MOULDING MATERIALS - TEST METHODS |
| VDE 0303-30 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| DIN ISO 4625:1981-06 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - RING AND BALL METHOD |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.