DIN 50021:1988-06
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SPRAY TESTS WITH DIFFERENT SODIUM CHLORIDE SOLUTIONS
Available format(s)
Hardcopy , PDF
Superseded date
01-10-2006
Language(s)
English
Published date
12-01-2013
Kein Inhaltsverzeichnis in der Norm vorhanden.
This Standard is included in DIN Handbook 175 and 219. Specifies the requirements which corrosion testing apparatuses and corrosive agents must meet in salt spray testing, the aim being to enable identical conditions to be reproduced in all cases in which spray tests are carried out on the basis of standards or agreements.
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| ISO 1456:2009 | Corresponds |
| ISO 1456:2009 | Identical |
| ISO 3768:1976 | Corresponds |
| ISO 9227:2017 | Corresponds |
| ISO 3768:1976 | Identical |
| DIN 58196-2:1996-07 | OPTICAL COATINGS - PART 2: TESTING OF THE ADHESION BY BOILING IN DEIONIZED WATER AND IN SALT WATER |
| DIN 55928-8:1994-07 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS - PART 8: PROTECTION OF SUPPORTING THIN-WALLED BUILDING COMPONENTS FROM CORROSION |
| DIN 65074:1999-03 | AEROSPACE - ADHESIVE FILMS AND PRIMERS FOR STRUCTURAL ASSEMBLIES - TECHNICAL SPECIFICATION |
| DIN EN 1670:2007-06 | Building hardware - Corrosion resistance - Requirements and test methods |
| DIN EN 2101:1991-08 | AEROSPACE SERIES - CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS |
| DIN EN 2284:1991-08 | AEROSPACE SERIES; SULPHURIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS |
| DIN EN ISO 12402-7:2015-08 (Draft) | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN 3016-4:2000-06 | FASTENING CLAMPS - PART 4: TECHNICAL DELIVERY CONDITIONS |
| BWB TL 8030-0002 : 5ED 2004 | |
| BWB TL 8305-0266 : 2ED 2008 | REFLECTING FOILS ON CARRIER FABRIC WITH ENCAPSULATED GLASS BALLS (SOLAS FOILS) |
| VDA 403 : 2011 | |
| DIN 50966:1988-05 | ELECTROPLATED COATINGS; AUTOCATALYTIC NICKEL-PHOSPHORUS COATINGS ON METAL IN TECHNICAL APPLICATIONS |
| 07/30161646 DC : 0 | BS EN 15646 - ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| DIN 58196-1:1996-07 | OPTICAL COATINGS - PART 1: TESTING OF THE ADHESION BY STORING IN DEIONIZED WATER AND IN SALT WATER |
| DIN EN 1256:2008-03 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| DIN EN 12864:2006-03 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| DIN EN 1036:1999-07 | GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLAT GLASS FOR INTERNAL USE |
| DIN EN 12330:2000-09 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM IRON OR STEEL |
| I.S. EN 1670:2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| VDI 2840:2005-11 | Carbon films - Basic knowledge, coating types and properties |
| VDI/VDE 2251 Blatt 8:2007-09 | Precision engineering components - Adhesive connections |
| VDI 3823 Blatt 4:2006-11 | Vacuum coating quality assurance - Testing of vacuum coated plastics |
| VDI 3824 Blatt 4:2001-08 | Quality assurance of PVD and CVD hard coating - Inspection planning of hard coatings |
| VDE 0804 : 1989 AMD 1 1992 | TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
| DIN 50900-3:1985-09 | CORROSION OF METALS; TERMS; TERMS OF CORROSION TESTING |
| DIN 29743:1987-12 | AEROSPACE; NICKEL PLATING OF STEEL; CODE NUMBER 3302 AND 3303 |
| DIN EN 50066 : 1994 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| DIN EN 1866:2006-03 | MOBILE FIRE EXTINGUISHERS |
| BWB TL 8010-0025 : 4ED 1998 | SEALING VARNISH FOR AMMUNITION - INDUSTRIAL |
| DIN 50942:1996-09 | PHOSPHATING OF METALS - PRINCIPLES, METHODS OF TEST |
| DIN 74234:1992-09 | HYDRAULIC BRAKING SYSTEMS - BRAKE PIPES, FLARES |
| DIN 5023:1989-02 | PAINTING BOX WITH OPAQUE COLOURS |
| ASTM A 947M : 2016 : REDLINE | Standard Specification for Textured Stainless Steel Sheet [Metric] |
| DIN EN 2583:1997-03 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY, NI-PH 2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| DIN EN 2516:1997-05 | AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTANT STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| DIN EN 2289:1996-10 | AEROSPACE SERIES - ROD BODIES IN ALUMINIUM ALLOY FOR FLIGHT CONTROLS - TECHNICAL SPECIFICATION |
| DIN EN 362:2008-09 | PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - CONNECTORS |
| UNI EN 1670 : 2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| DIN 58390-4:1985-06 | ENVIRONMENTAL TESTING OF OPTICAL INSTRUMENTS; SALT MIST |
| DIN 65230:1988-12 | AEROSPACE; ANODIC POLISHING OF MARAGING STAINLESS STEELS; CODE NUMBER 2600 |
| DIN 7872:1990-11 | WATER SPORTS EQUIPMENT; INFLATABLE BATHING BOATS WITH SAIL AND/OR MOTOR; SAFETY REQUIREMENTS AND TESTING |
| VDE 0625-10 : 1994 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| DIN 60060-1:1991-10 | WEBBING LOAD RESTRAINT ASSEMBLIES MADE FROM SYNTHETIC FIBRES FOR USE ON COMMERCIAL VEHICLES |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| DIN 50939:1996-09 | CORROSION PROTECTION; CHROMATING OF ALUMINIUM; PRINCIPLES AND METHODS OF TEST |
| DIN 47608-2:1997-10 | TERMINAL STRIPS WITH INSULATION DISPLACEMENT CONTACTS FOR TELECOMMUNICATION SYSTEMS; REQUIREMENTS, TESTS |
| VDA 402 : 2011 | |
| DIN EN 60999-1 : 2000 | CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS; SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0.2 MM[2] UP TO 35 MM[2] |
| VDE 0609-1 : 2000 | CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0.2 MM[2] UP TO 35 MM[2] |
| BWB TL 6850-0030 : 3ED 1998 | DERUSTING AGENT (RUST REMOVER) |
| DIN 3017-4:1998-05 | Hose clamps - Part 4: Technical delivery conditions |
| DIN ISO 6162-1:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| DIN 29978:1994-12 | AEROSPACE - HONEYCOMB CORES, HEXAGONAL EXPANDED, IN WROUGHT ALUMINIUM ALLOY, CORROSION PROTECTED, UNPERFORATED OR PERFORATED - TECHNICAL SPECIFICATION |
| DIN ISO 6162-2:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51 |
| DIN EN ISO 12402-9:2015-08 (Draft) | PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
| DIN 50900-2:2002-06 | CORROSION OF METALS - TERMS - PART 2: ELECTROCHEMICAL TERMS |
| DIN 50900-3:1985-09 | CORROSION OF METALS; TERMS; TERMS OF CORROSION TESTING |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| DIN 50942:1996-09 | PHOSPHATING OF METALS - PRINCIPLES, METHODS OF TEST |
| DIN 50900-1:1982-04 | CORROSION OF METALS; TERMINOLOGY; GENERAL CONCEPTS |
| ISO 8407:2009 | Corrosion of metals and alloys Removal of corrosion products from corrosion test specimens |
| DIN 1623-1:1983-02 | STEEL FLAT PRODUCTS - COLD ROLLED SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS - MILD UNALLOYED STEELS FOR COLD FORMING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.