DIN 7168-1:1981-05
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
GENERAL TOLERANCES - LINEAR AND ANGULAR DIMENSIONS
Superseded date
01-04-1991
Published date
12-01-2013
Sorry this product is not available in your region.
Kein Inhaltsverzeichnis in der Norm vorhanden.
Specifies general tolerances for linear and angular dimensions including drawing specifications.
| DevelopmentNote |
Supersedes DIN 1768 (07/2002)
|
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| ISO 2768:1973 | Similar to |
| DIN 42706:1983-02 | INDUSTRIAL SEWING MACHINES; CLUTCH MOTOR WITH POSITION DEVICE; MAIN DIMENSIONS |
| DIN 29831:1987-09 | AEROSPACE - VENTED NICKEL-CADMIUM STORAGE BATTERIES, 24 V 40 AH |
| DIN VDE 0472-805 : 1994 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS; OZONE RESISTANCE |
| DIN 14923:1989-06 | SAFETY BELT FOR FIREMEN - MEASURES, REQUIREMENTS, TESTS |
| DIN 14307-2:1986-11 | ALUMINIUM ALLOY SOLID COUPLING TYPE C, WITH SEALING RING FOR SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| DIN 7474:1983-12 | PLAIN BEARINGS; THICK-WALLED MULTILAYER PLAIN BEARINGS WITH CYLINDRICAL BORE, DIVIDED |
| DIN 7957:1983-03 | HARDWARE; FLAP HINGE ROLLED |
| DIN 15315:1999-12 | LIFT - CABLE JOINTS |
| DIN 15062-2:1982-07 | CRANES; SHEAVES FOR WIRE ROPES; DIMENSIONS FOR HUBS AND BEARINGS |
| DIN 15401-2:1983-09 | LIFTING HOOKS FOR LIFTING APPLIANCES - SINGLE HOOKS - FINISHED PARTS WITH THREADED SHANK |
| DIN 8165-2:1992-03 | SOLID BEARING PIN TYPE FV CONVEYOR CHAINS; ATTACHMENT PLATES |
| DIN 71428:1989-11 | COMPRESSION COUPLINGS WITH OLIVES - CYLINDRICAL THREAD NIPPLES FOR USE WITH UNION NUTS |
| DIN 6328-3:1980-04 | TAPER CHUCKS FOR PARALLEL SHANK, FORM C FOR TOOLS WITHOUT DRIVING SQUARES |
| DIN 19214-2:1985-07 | FLOW MEASUREMENT - DIFFERENTIAL PRESSURE DEVICES WITH FLANGES TAPS, NOMINAL DIAMETER 10 TO 400, NOMINAL PRESSURE 10 TO 100 - SEALING SURFACE PROJECTION AND RECESS |
| DIN 54345-3:1985-07 | TESTING OF TEXTILES; ELECTROSTATIC BEHAVIOUR; DETERMINATION OF ELECTROSTATIC CHARGE OF TEXTILE FLOOR COVERINGS BY MACHINE |
| DIN 1142:1982-01 | WIRE ROPE GRIPS FOR ROPE TERMINATIONS TO MEET SAFETY REQUIREMENTS |
| DIN 43732:1986-03 | MEASUREMENT AND CONTROL; ELECTRICAL TEMPERATURE SENSORS; THERMOCOUPLES FOR THERMOMETERS |
| DIN 48840:1985-03 | LIGHTNING PROTECTION SYSTEM; CONNECTION TERMINALS FOR SHEETS |
| DIN 48852-3:1985-03 | LIGHTNING PROTECTION SYSTEM; EARTHING ROD; CONNECTING CLAMP FOR DEEP-EARTHING RODS |
| DIN 15414:1983-08 | BOTTOM HOOK BLOCKS, NUT LECKING DEVICES FOR CRANES |
| DIN 9753:1982-11 | OFFICE MACHINES; KEYBOARD LAYOUTS FOR NUMERIC APPLICATIONS; TEN KEY BLOCK-KEYBOARD |
| DIN 46255:1982-11 | SCREWED GLANDS WITH STEEL CONDUIT THREAD, HEAVY DUTY CONSTRUCTION; DIMENSIONS, MOUNTING INSTRUCTIONS |
| DIN 14308-2:1986-11 | ALUMINIUM ALLOY SOLID COUPLING TYPE B, WITH SEALING RING FOR SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| DIN 6328-2:1980-04 | TAPER CHUCKS FOR PARALLEL SHANK, FORM B FOR TOOLS WITH ISO-DRIVING SQUARES |
| DIN 14711-2:1988-08 | SCALING LADDER MADE FROM LIGHT METAL |
| BWB TL 7110-0083 : 1ED 1983 | FORM INSERT FOR PULL-OUT TELESCOPE |
| DIN 2543:1977-09 | CAST STEEL FLANGES - NOMINAL PRESSURE 16 |
| DIN 1481:1978-11 | SPRING-TYPE STRAIGHT PINS (ROLL PINS), HEAVY TYPE |
| DIN 43766:1986-03 | MEASUREMENT AND CONTROL; ELECTRICAL TEMPERATURE SENSORS; THERMOMETERS WITH MOUNTING WITH BOLTED THREAD G 1 |
| DIN 65574:1993-01 | AEROSPACE; NAMEPLATES; DIRECTIONS FOR DESIGN |
| DIN 41671:1987-06 | MINIATURE FUSES - FUSE BASE 6,3 A/250 V NOT AFFORDING PROTECTION AGAINST CONTACT WITH LIVE PARTS - SCREW-IN TYPE, FASTENING THREAD M 14 X 1 FOR INTERCHANGEABLE FUSE-LINKS |
| DIN 65422-1:1981-12 | AEROSPACE; ANTI-COLLISION BEACON LIGHT UNITS |
| DIN 43771:1989-12 | MEASUREMENT AND CONTROL; ELECTRICAL TEMPERATURE SENSORS; FAST RESPONSE THERMOMETERS |
| DIN 43729:1978-12 | ELECTRICAL TEMPERATURE SENSORS - CONNECTION HEADS FOR THERMOCOUPLE-THERMOMETERS AND RESISTANCE-THERMOMETERS |
| DIN 43560-1:1981-07 | FUSES FOR BATTERY POWERED INDUSTRIAL TRUCKS; FUSE-LINKS 80 V |
| DIN 20030:1992-06 | HOSE FITTINGS - STRAIGHT-WAY-COCK WITH GRIP - DIMENSIONS, MATERIALS, REQUIREMENTS |
| DIN 7464:1983-01 | CASE LOCK; FLUSH TYPE |
| DIN 20314:1990-06 | SCREW THREADS FOR DRILL TUBES WITH DIAMETERS EXCEEDING 100 MM FOR LARGE HOLE BORING IN MINING |
| DIN 48818:1986-08 | LIGHTNING PROTECTION SYSTEM; CLAMPS |
| DIN 14343:1986-11 | ALUMINIUM ALLOY A-B-ADAPTOR FOR NOMINAL PRESSURE 16 |
| DIN 6358:1988-07 | MILLING MACHINE ARBORS WITH TAPER SHANK 7/24 FOR MILLING CUTTER WITH LONGITUDINAL OR TRANSVERSE DRIVE |
| DIN 29833:1983-06 | AEROSPACE - VENTED NICKEL-CADMIUM STORAGE BATTERIES, 24 V 15 AH |
| DIN 19214-4:1985-07 | FLOW MEASUREMENT - DIFFERENTIAL PRESSURE DEVICES WITH ORIFICE FLANGES - METER RUNS, NOMINAL DIAMETER 10 TO 200 |
| DIN 28126:1989-04 | DN 125 BOW CLOSURES FOR PROCESS EQUIPMENT |
| DIN 43764:1986-03 | MEASUREMENT AND CONTROL; ELECTRICAL TEMPERATURE SENSORS; STRAIGHT THERMOMETERS WITH INSERT |
| DIN 14322:1989-09 | Aluminium alloy suction coupling type B; nominal pressure 16 |
| DIN 8175:1980-02 | Conveyor chains; bush conveyor chains, heavy type |
| DIN 4802:1980-10 | SINGLE-WALL WATER HEATERS WITH NECK, OF STEEL |
| DIN 14302:1985-04 | Aluminium alloy delivery coupling type C; nominal pressure 16 |
| DIN 4801:1980-10 | SINGLE-WALL WATER HEATERS WITH COVER TO BE UNSCREWED, OF STEEL |
| DIN 28426-1:1983-08 | Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum |
| DIN 44050:1982-09 | FIXED RESISTORS, NON-WIREWOUND - TERMINOLOGY, CHARACTERISTICS, METHODS OF TEST AND APPLICATION |
| DIN 7129:1980-07 | FILTER PRESSES - RECESSED PLATES, FILTERPLATES, FRAMES, SIDE BARS - MAIN DIMENSIONS, TOLERANCES |
| DIN 2543 E : 1977 | CAST STEEL FLANGES - NOMINAL PRESSURE 16 |
| DIN 19206-1:1985-07 | FLOW MEASUREMENT - ORIFICE PLATES FOR INSERTION BETWEEN FLANGES, NOMINAL DIAMETER 50 TO 2000, NOMINAL PRESSURE 1 TO 100 - SEALING SURFACE RAISED FACE |
| DIN 26017:1987-08 | TANK WAGONS AND TANK CONTAINERS - SHUT-OFF DEVICES WITH THREADS CONNECTION - MOUNTING AND CONNECTING DIMENSIONS, ACCESSORIES |
| DIN 15106:1982-09 | LIFTING HOOKS; SAFETY CATCH FOR SIMPLE LOAD HOOK |
| DIN 28461:1987-11 | FLANGES FOR TANK TRUCKS - PLAIN WELDING FLANGES FOR STEEL TUBES |
| DIN 86029:1987-01 | HUBBED SLIP-ON FLANGES FOR WELDING - NOMINAL PRESSURE 10 |
| DIN 19206-2:1985-07 | FLOW MEASUREMENT - ORIFICE PLATES FOR INSERTION BETWEEN FLANGES, NOMINAL DIAMETER 10 TO 400, NOMINAL PRESSURE 10 TO 100 - SEALING SURFACE PROJECTION AND RECESS |
| DIN 28463:1987-11 | FLANGES FOR TANK TRUCKS - GASKETS |
| DIN 1596:1988-02 | LIGHT PIPE CLIPS WITH PIPE-TIGHTENING - SINGLE-ENDED FOR RAIL VEHICLES |
| DIN 28125-3:1989-04 | HINGED COVERS - CIRCULAR SHAPE WITH PROTECTION RING AND SURFACE COATED - DN 500 AND DN 600 |
| DIN 1048-1:1991-06 | TESTING CONCRETE - TESTING OF FRESH CONCRETE |
| DIN 65367:1987-11 | AEROSPACE; SPACER FOR TUBE ASSEMBLIES |
| DIN 1680-1:1980-10 | ROUGH CASTINGS; GENERAL TOLERANCES AND MACHINING ALLOWANCES, GENERAL |
| DIN 3866:1990-06 | REFRIGERATION - THREADED STEM - 90 DEGREES FLARED FLANGES FOR SOLDERLESS COMPRESSION COUPLINGS RATED FOR PN 40 |
| DIN 41307-3:1981-02 | Accessory parts for small transformers and chokes; attachment straps for cores typ E, U and 3 U |
| DIN 13034:1985-12 | TROLLEY FOR STRETCHERS, HEIGHT-ADJUSTABLE |
| DIN 14330-2:1985-04 | ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16, USED FOR FIRE HOSES S 32 |
| DIN 740-1:1986-08 | POWER TRANSMISSION ENGINEERING; FLEXIBLE SHAFT COUPLINGS; TECHNICAL DELIVERY CONDITIONS |
| DIN 55029:1980-03 | MACHINE TOOLS - SPINDLE NOSES AND FACE PLATES WITH CENTERING TAPER - CAMLOCK TYPE, ACCESSORIES - DIMENSIONS |
| DIN 4922-2:1981-04 | STEEL FILTER PIPES FOR DRILLED WELLS WITH SCREWED CONNECTION DN 100 TO DN 500 |
| DIN 55028:1980-03 | MACHINE TOOLS - MOUNTINGS FOR CLAMPING DEVICES - CONNECTING DIMENSIONS FOR SPINDLE NOSES ACCORDING TO DIN 55026 AND DIN 55027 |
| DIN 55058:1978-09 | SPINDLE NOSES FOR ADJUSTABLE ADAPTERS - CONNECTING DIMENSIONS |
| DIN 55027:1980-03 | MACHINE TOOLS - SPINDLE NOSES WITH CENTERING TAPER, FACE PLATE AND BAYONET TYPE FASTENING, ACCESSORIES - DIMENSIONS |
| DIN 48850:1987-03 | LIGHTNING PROTECTION SYSTEM; EARTH ROD ELECTRODES |
| DIN 1197-2:1990-06 | PICK EYES - OVAL - PLUG GAUGES |
| DIN 16064:1987-02 | ACCURACY CLASSES 1,0, 1,6 AND 2,5 - PRESSURE GAUGES OF 80 MM, 100 MM, 160 MM AND 250 MM CASE DIAMETER WITH BOURDON TUBE ELEMENT - DIMENSIONS AND NOMINAL RANGES |
| DIN 52307:1990-03 | DART DROP TEST ON SAFETY GLASS FOR VEHICLE GLAZING |
| DIN VDE 0604-1 : 1986 | TRUNKING MOUNTED ON WALLS AND CEILINGS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| DIN 48843:1985-03 | LIGHTNING PROTECTION SYSTEM; CROSS CONNECTOR, LIGHT TYPE |
| DIN 3132:1984-07 | TOGGLE-TYPE FASTENERS - SALIENT, WITH SHORT BASE PLATE |
| DIN 11023:1979-10 | AGRICULTURAL MACHINERY; LINCH PINS |
| DIN 69056-1:1992-01 | MACHINE TOOLS - SIDEWAYS - DIMENSIONS OF RECTANGULAR PROFILE, TYPE A - TECHNICAL DELIVERY CONDITIONS |
| DIN 1592:1988-02 | HEAVY PIPE CLIPS WITH PIPE-TIGHTENING - SINGLE-ENDED FOR RAIL VEHICLES |
| DIN 20311:2002-11 | DRILL TUBES WITH DIAMETERS EXCEEDING 100 MM FOR LARGE HOLE BORINGS IN MINING |
| DIN 41673:1979-10 | MINIATURE FUSES - SCREW TYPE FUSE-BASE 6,3 A, 250 V - FLAT, FOR INTERCHANGEABLE CARTRIDGE FUSE-LINKS |
| DIN 71429:1989-11 | COMPRESSION COUPLINGS WITH OLIVES - BULKHEAD COMPRESSION COUPLINGS SMALL STUD AND ELBOW FITTINGS FOR USE WITH UNION NUTS |
| DIN 41699:1989-12 | ELECTRICAL COMMUNICATION ENGINEERING - SIX POLE PLUG |
| DIN 1581:1977-12 | STEEL BARS; HINGE STRIP PROFILES; DIMENSIONS, WEIGHTS |
| DIN VDE 0604-3 : 1986 | TRUNKING MOUNTED ON WALLS AND CEILINGS FOR ELECTRICAL INSTALLATIONS - SKIRTING BOARD DUCTS |
| DIN 41307-4:1981-04 | Accessory parts for small transformers and chockes; fixing brackets for cores type UI and 3UI |
| DIN 2083-1:1980-04 | BEARING SLEEVES FOR MILLING MACHINE ARBORS, FOR MILLING CUTTERS WITH LONGITUDINAL KEYWAY |
| DIN 41676:1987-06 | MINIATURE FUSES; FUSE CARRIER FOR 6.3 A/250 V SCREW-IN TYPE; FUSE BASES COMPLYING WITH DIN 41672 & DIN 41677 |
| DIN 4804:1980-10 | DOUBLE-WALL WATER HEATERS WITH NECK OF STEEL |
| DIN 66211-1:1988-02 | MAGNETIC TAPE CASSETTE FOR INFORMATION PROCESSING, TAPE WIDTH 3,81 MM; MECHANICAL PROPERTIES |
| DIN 42553:1986-12 | TRANSFORMERS; DE-AERATOR WITH SNOW PROTECTION; FILLING NOZZLE |
| DIN 7346:1978-11 | SPRING TYPE STRAIGHT PINS, SLOTTED, SLIGHT TYPE |
| DIN 48845:1986-03 | LIGHTNING PROTECTION SYSTEM; CROSS CONNECTOR; HEAVY TYPE |
| BWB TL 8465-0166 : 1ED 2004 | |
| DIN 16063:1987-02 | ACCURACY CLASSES 1,6, 2,5 AND 4,0 - PRESSURE GAUGES OF 40 MM, 50 MM AND 63 MM CASE DIAMETER WITH BOURDON TUBE ELEMENT - DIMENSIONS AND NOMINAL RANGES |
| DIN 19205-1:1988-08 | FLOW MEASUREMENT - DIFFERENTIAL PRESSURE DEVICES WITH CORNER TAPS - METER RUNS NOMINAL DIAMETER 10 TO 200 AND CARRIER RINGS NOMINAL DIAMETER FROM 50 TO 2000 |
| DIN 48837:1986-08 | LIGHTNING PROTECTION SYSTEM; CONNECTORS |
| DIN 73368:1986-02 | OVERFLOW VALVES AND HOLLOW SCREW FOR FUEL INJECTION DEVICES |
| DIN 2908-2:1979-02 | OVAL BLANK PLUGS: PARTS |
| DIN 28460:1987-11 | FLANGES FOR TANK TRUCKS - WELDING FLANGES FOR ALUMINIUM TUBES |
| DIN 1451-4:1987-08 | TYPEFACES - LINEAL LINEAR-ANTIQUA - STENCILED LETTERING FOR ENGRAVING AND OTHER PROCESSES |
| DIN 820-24:1986-11 | STANDARDIZATION; PRESENTATION OF STANDARDS; FIGURES AND TABLES |
| DIN 16963-15:1987-06 | PIPE JOINT ASSEMBLIES AND FITTINGS OF HIGH-DENSITY POLYETHYLENE (PE-HD) PRESSURE PIPES - THREADED PIPE JOINTS - DIMENSIONS |
| DIN 28125-1:1989-08 | DN 150 TO DN 600 ROUND HINGED CLOSURES |
| DIN 228-2:1987-03 | MORSE TAPERS AND METRIC TAPERS - TAPER SOCKETS |
| DIN 7956:1983-07 | HARDWARE; CONTINUOUS HINGE ROLLED |
| DIN 14365-1:1991-02 | MULTI PURPOSE BRANCH PIPES FOR NOMINAL PRESSURE 16 - DIMENSIONS, MATERIALS, CONSTRUCTION, MARKING |
| DIN 6360:1983-05 | MILLING MACHINE ARBORS WITH 7/24 TAPER FOR MILLING CUTTERS WITH LONGITUDINAL AND TRANSVERSE DRIVE |
| DIN 40009:1982-11 | MARKINGS FOR CONDUCTORS; SIGNS |
| DIN 54333-1:1981-12 | Testing of textiles; determination of burning behaviour; horizontal method; ignition at the edge of the specimen |
| DIN 19053:1991-01 | MICROFILM APERTURE CARD FOR FILM 35 MM |
| DIN 1593:1988-02 | HEAVY PIPE CLIPS WITH PIPE-TIGHTENING - DOUBLE-ENDED FOR RAIL VEHICLES |
| DIN 28125-2:1989-04 | HINGED COVERS - ELLIPTICAL, 350 MM X 450 MM |
| DIN 8906:1990-06 | PN 40 FLARED FLANGE SOLDERLESS COMPRESSION COUPLINGS FOR USE IN REFRIGERATING SYSTEMS |
| DIN 29998:1983-06 | AEROSPACE - VENTED NICKEL-CADMIUM STORAGE BATTERY, 24 V 40 AH, LONG |
| DIN 43187:1987-12 | PANTOGRAPHS FOR ELECTRIC TRACTION FOR ELECTRIC TRAMCARS; MAIN DIMENSIONS |
| DIN 317:1980-07 | EJECTOR DRIFTS FOR TAPER SHANKS WITH FLAT TANG |
| DIN 2080-1:1978-12 | 7/24 TAPER SHANKS FOR TOOLS AND CLAMPING DEVICES, TYPE A |
| DIN 15418-2:1982-07 | CRANES; BOTTOM BLOCKS; SPACER SLEEVES FOR TYPE C ROPE PULLEYS WITH DEEP GROOVE BALL BEARING, WITHOUT INTERNAL SLEEVE |
| DIN 15092:1982-07 | CRANES; DRIVING WHEEL UNITS AND IDLER WHEEL UNITS; SEALING COVERS |
| DIN 15418-3:1982-07 | CRANES; BOTTOM BLOCKS; SEALING COVERS FOR TYPE C ROPE PULLEYS WITH DEEP GROOVE BALL BEARING, WITHOUT INTERNAL SLEEVE |
| DIN 65299:1988-12 | AEROSPACE; UNIVERSAL JOINTS, NEEDLE BEARING SUPPORTED, LONG-TIME LUBRICATED, FOR ROTARY SHAFTS; DOUBLE JOINTS; CONNECTION DIMENSIONS, LOADS MASSES |
| DIN 48835:1986-08 | LIGHTNING PROTECTION SYSTEM; TESTING JOINTS |
| BWB TL 1080-0014 : 2ED 1982 | PACKING BAGS FOR CAMOUFLAGE NETS |
| DIN 43870-1:1991-02 | METER MOUNTING BOARDS; DIMENSIONS BASED ON A GRID SYSTEM |
| DIN 6643-2:1987-02 | PACKAGING - STEEL DRUMS - CLOSURES AND MEANS OF SEALING FOR DRUMS |
| DIN 71436:1989-11 | COMPRESSION COUPLINGS WITH OLIVES - HOLLOW SCREW FITTINGS AND RING CONNECTION FITTINGS FOR USE WITH UNION NUTS |
| DIN 48841:1985-03 | LIGHTNING PROTECTION SYSTEM; CONNECTING- AND BRIDGING COMPONENTS |
| DIN 43762:1986-03 | MEASUREMENT AND CONTROL; ELECTRICAL TEMPERATURE MEASURING SENSORS, INSERTS FOR RESISTANCE ELEMENTS |
| DIN 332-2:1983-05 | CENTRE HOLES 60 DEGREES WITH THREAD FOR SHAFT ENDS FOR ROTATING ELECTRICAL MACHINES |
| DIN 1197-1:1990-06 | EYES FOR PICKS, OVAL - DIMENSIONS, REQUIREMENTS, TESTING |
| DIN 15421-3:1982-07 | CRANES; BOTTOM BLOCKS; SEALING COVERS FOR TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
| DIN 2909-2:1979-02 | ROUND BLANK PLUGS; PARTS |
| DIN 68901:1986-01 | KITCHEN EQUIPMENT - COORDINATION SIZES OF KITCHEN FURNITURE AND KITCHEN APPLIANCES, SINKS AND DECORATED PANELS |
| DIN 108-1:1988-05 | Slide projectors and slides; projector slides for general use and for theatre projection, nominal sizes, dimensions of masks, picture position and marking |
| DIN 3415-2:1990-06 | TEXTILE TOUCH AND CLOSE FASTENERS - TEST METHODS |
| DIN 41701:1989-12 | ELECTRICAL COMMUNICATION ENGINEERING; FOUR POLE PLUG |
| DIN 2084-1:1979-09 | SPACING COLLARS FOR MILLING MACHINE ARBORS |
| DIN 28403:1986-09 | VACUUM TECHNOLOGY - QUICK RELEASE COUPLINGS - CLAMPED TYPE COUPLINGS |
| DIN 15421-1:1982-07 | CRANES; BOTTOM BLOCKS; TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
| DIN 43734:1986-03 | MEASUREMENT AND CONTROL - ELECTRICAL TEMPERATURE SENSORS - STOP FLANGES FOR THERMOCOUPLE THERMOMETERS AND RESISTANCE THERMOMETERS |
| DIN 5299:1980-10 | SNAP HOOK HALF-ROUND WIRE, ROUND WIRE AND FORGED |
| DIN 9015-2:1986-12 | AEROSPACE; ISO-FITS FOR ENGINE CONSTRUCTION (EXCEPT MOUNTING OF ROLLER BEARINGS) |
| DIN 6327-4:1981-08 | ADJUSTABLE ADAPTORS FOR TOOLS WITH MORSE TAPER SHANKS; ADJUSTMENT NUTS FOR ADAPTORS |
| DIN 2172-2:2007-12 | REAMERS - PART 2: TECHNICAL SPECIFICATIONS FOR SHELL REAMERS |
| DIN 7955:1983-03 | HARDWARE; HINGES FORGED |
| DIN VDE 0604-2 : 1986 | TRUNKING MOUNTED ON WALLS AND CEILINGS FOR ELECTRICAL INSTALLATIONS - PART 2: TRUNKING FOR APPLIANCES |
| DIN 8839:1978-08 | WOODWORKING MACHINES; DIFFERENTIAL NUTS |
| DIN VDE 0660-506 : 1989 | SWITCH GEAR AND CONTROL GEAR - SWITCH GEAR AND CONTROL GEAR ASSEMBLIES - SLOTTED TRUNKING; REQUIREMENTS AND TESTS |
| DIN 41307-5:1981-10 | Accessory parts for small transformers and chokes; brackets for cores type E, ED, EE, EF and EK; printed circuits, magnetic axis horizontal |
| DIN 29783:1983-04 | AEROSPACE - PRECISION CASTINGS OF TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION |
| VDE 0472-805 : 1994 | TESTING OF CABLES, WIRES & FLEXIBLE CORDS - OZONE RESISTANCE |
| DIN 14319:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE A WITH METALLIC SEALING AREA AND WITH CAST IRON OR WITH ALUMINIUM ALLOY COVER, TYPE A - NOMINAL PRESSURE 16 |
| DIN 86030:1987-01 | HUBBED SLIP-ON FLANGES FOR WELDING - NOMINAL PRESSURE 16 |
| DIN 46008:1987-01 | FLAT CONTACT SURFACES FOR EARTHING SCREWS; RATED VOLTAGE NOT EXCEEDS 52 KV |
| DIN 5290-1:1983-04 | SNAP HOOK FROM LIGHT METAL; WITH SETTING NUT; DIMENSIONS, REQUIREMENTS AND TESTING |
| DIN 43658:1977-04 | GENERAL TOLERANCES FOR OUTDOOR SUBSTATIONS |
| DIN 66237-1:1985-01 | INFORMATION PROCESSING - FLEXIBLE DISK CARTRIDGE 200 USING ONE OR TWO SIDES - MECHANICAL PROPERTIES |
| DIN 52306:1990-03 | BALL DROP TEST ON SAFETY GLASS FOR VEHICLE GLAZING |
| DIN 14323:1985-04 | Aluminium alloy delivery and suction coupling type A; nominal pressure 16 |
| DIN 40019:1986-02 | SIGNBOARDS FOR ELECTRICAL SUPPLY CABLES |
| DIN 8165-1:1992-03 | SOLID BEARING PIN TYPE FV CONVEYOR CHAINS; SINGLE-STRAND AND DOUBLE-STRAND CHAINS |
| DIN 6327-3:1985-06 | ADJUSTABLE ADAPTORS FOR TOOLS WITH MORSE TAPER SHANKS, STEPPED TYPES |
| DIN 3761-13:1984-01 | ROTARY SHAFT LIP TYPE SEALS FOR AUTOMOBILES; TEST FOR CURING STATE OF ELASTOMERS |
| DIN 19206-3:1985-07 | FLOW MEASUREMENT - ORIFICE PLATES FOR INSERTION BETWEEN FLANGES, NOMINAL DIAMETER 10 TO 400, NOMINAL PRESSURE 64 TO 400 - SEALING SURFACE LENS-SHAPE |
| DIN 8912:1990-06 | COUPLING NUTS AND SCREWED PLUGS FOR USE WITH PN 40 FLARED FLANGE SOLDERLESS COMPRESSION COUPLINGS IN REFRIGERATING SYSTEMS |
| DIN 44704:1978-03 | Handles for electric tools |
| DIN 108-8:1991-03 | SLIDE PROJECTORS AND SLIDES - STRAIGHT CARTRIDGE 5 X 5-36 AND 5 X 5-50 - DIMENSIONS |
| DIN 48811:1985-03 | LIGHTNING PROTECTION SYSTEMS; ROOF CONDUCTOR HOLDERS FOR HIGHLY COMBUSTIBLE ROOFS; SPAN CAP |
| DIN 14307-1:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE C WITH SEALING RING FOR PRESSURE PURPOSES - NOMINAL PRESSURE 16 |
| DIN 46259:1982-11 | SEALINGS RINGS FOR GLANDS; HEAVY DUTY CONSTRUCTION; CABLE ENTRIES |
| DIN 7958:1983-07 | HARDWARE; FLAP HINGE FORGED |
| DIN 28459:1987-11 | FLANGES FOR TANK TRUCKS - MOUNTING DIMENSIONS |
| DIN 8542:1983-09 | HOSE CONNECTIONS AND COUPLERS FOR EQUIPMENT FOR WELDING, CUTTING AND ALLIED PROCESSES |
| DIN 40771-1:2013-01 | VENTED NICKEL-CADMIUM-ACCUMULATORS - PART 1: CELLS IN PLASTIC CONTAINERS WITH POCKET TYPE PLATES - RATED CAPACITIES - MAIN DIMENSIONS |
| DIN 76032:1979-03 | THIMBLES FOR STEEL WIRE ROPES FOR ROAD VEHICLE SALVAGE |
| DIN 15146-2:1986-11 | TIMBER FOUR-WAY FLAT PALLETS - 800 MM X 1200 MM |
| DIN 42705:1981-12 | INDUSTRIAL SEWING MACHINES; POSITION TRANSMITTER; MOUNTING DIMENSIONS |
| DIN 6329:1981-08 | SOCKETS FOR PARALLEL SHANK TOOLS WITH DRIVING TENONS |
| DIN 1597:1988-02 | LIGHT PIPE CLIPS WITH PIPE-TIGHTENING - DOUBLE-ENDED FOR RAIL VEHICLES |
| DIN 48802:1986-08 | LIGHTNING PROTECTION SYSTEMS, AIR TERMINATION RODS |
| DIN 70852:1989-06 | GROOVE NUTS - DIMENSIONS |
| DIN 50191:1987-09 | HARDENABILITY TEST BY END QUENCHING |
| DIN 8063-7:1980-07 | PIPE JOINTS AND THEIR ELEMENTS OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - TEES AND BRANCHES OF INJECTION MOULDED FOR COLD WELDING - DIMENSIONS |
| DIN 6354:1980-04 | MILLING MACHINE ARBORS WITH STEEP TAPER, COMPLETE |
| DIN 8914:1990-06 | 90 DEGREE TAPERED SEAL RINGS AND CAPS FOR USE WITH PN 40 FLARED FLANGE SOLDERLESS COMPRESSION COUPLINGS IN REFRIGERATING SYSTEMS |
| DIN 71988:1983-02 | CABLES FOR CONTROLS FOR MOTORBYCICLES - NIPPLES NOT TO BE USED FOR NEW DESIGNS |
| DIN 48088-5:1985-07 | CONNECTING POINT FOR EARTHING AND SHORT CIRCUITING DEVICES; CONNECTING PIECE FOR EARTHING CONDUCTORS |
| DIN 58390-12:1986-09 | ENVIRONMENTAL TESTING OF OPTICAL INSTRUMENTS - CONTAMINATION |
| DIN 42692:1980-12 | INDUSTRIAL SEWING MACHINES; GROOVED PULLEYS FOR MOTORS WITH CLUTCH, DIMENSIONS |
| DIN 15062-1:1982-07 | CRANES; SHEAVES FOR WIRE ROPES; SELECTED RANGES AND ASSOCIATION OF DIAMETERS AND OVERALL BREADTH DIMENSIONS |
| DIN 54336:1986-11 | TESTING OF TEXTILES; DETERMINATION OF BURNING BEHAVIOUR; VERTICAL METHOD, IGNITION AT THE LOWER EDGE OF THE SPECIMEN |
| DIN 2211-3:1986-01 | POWER TRANSMISSION ELEMENTS - GROOVED PULLEYS FOR NARROW V-BELTS - ASSIGNMENT OF PULLEYS TO ELECTRIC MOTORS |
| DIN 24340-3:1984-01 | HYDRAULIC VALVES - MOUNTING SURFACES AND CONNECTING PLATES FOR PRESSURE CONTROL VALVES AND CHECK VALVES |
| DIN 14318:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE B WITH METALLIC SEALING AREA AND WITH CAST IRON COVER OR WITH ALUMINIUM ALLOY COVER, TYPE B - NOMINAL PRESSURE 16 |
| DIN 14330-1:1985-04 | ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16, USED FOR FIRE HOSES S 28 |
| DIN 54345-4:1985-07 | TESTING OF TEXTILES; ELECTROSTATIC BEHAVIOUR, DETERMINATION OF ELECTROSTATIC CHARGE OF TEXTILE FABRICS |
| DIN 14321:1985-04 | Aluminium alloy suction coupling type C; nominal pressure 16 |
| DIN 2240-1:2001-12 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - HANDLES - PART 1: FOR GAUGING MEMBERS WITH TAPER LOCK 1:50 UP TO 40 MM NOMINAL DIAMETER |
| DIN 14342:1986-11 | ALUMINIUM ALLOY B-C-ADAPTER FOR NOMINAL PRESSURE 16 |
| DIN 228-1:1987-05 | MORSE TAPERS AND METRIC TAPERS - TAPER SHANKS |
| DIN 11025:1980-05 | AGRICULTURAL EQUIPMENT; NON-AUTOMATIC COUPLING FOR CONNECTING |
| DIN 18251:1991-03 | LOCKS - MORTISE LOCKS FOR DOORS |
| DIN 22107:1984-08 | CONTINUOUS MECHANICAL HANDLING EQUIPMENT - IDLER SETS FOR BELT CONVEYORS FOR LOOSE BULK MATERIALS, PRINCIPAL DIMENSIONS |
| DIN 15421-2:1982-07 | CRANES; BOTTOM BLOCKS; INTERNAL SLEEVES AND SPACER SLEEVES FOR TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
| DIN 477-4:1982-09 | COMPRESSED GAS CYLINDER VALVES; SWING CHECK VALVES FOR CAMPING-CYLINDERS |
| DIN 810:1986-11 | MACHINE TOOLS; PRESSES; SLIDE HOLES FOR SHANKS OF PRESS TOOLS; DIMENSIONS |
| VDE 0604-3 : 1986 | TRUNKING MOUNTED ON WALLS AND CEILINGS FOR ELECTRICAL INSTALLATIONS; SKIRTING BOARD DUCTS |
| DIN 9015-1:1986-12 | AEROSPACE; ISO-FITS FOR AIRFRAME CONSTRUCTION (EXCEPT MOUNTING OF ROLLER BEARINGS) |
| DIN 28427:1983-02 | VACUUM TECHNOLOGY; ACCEPTANCE SPECIFICATIONS FOR DIFFUSIONS PUMPS AND VAPOUR JET VACUUM PUMPS FOR VAPOUR PRESSURES OF THE PUMP FLUID <1 MBAR |
| DIN 48852-2:1985-03 | LIGHTING PROTECTION SYSTEM; EARTHING ROD, MULTI-PIECE (DEEP-EARTHING ROD) |
| DIN 26016:1987-08 | TANK WAGONS AND TANK CONTAINERS - SHUT-OFF DEVICES WITH FLANGE CONNECTION - MOUNTING AND CONNECTING DIMENSIONS, ACCESSORIES |
| DIN 71987:1983-03 | CONTROL CABLES - CABLE, SHEATING, SOCKET FOR MOTORCYCLES, NOT APPLICABLE FOR NEW DESIGN |
| DIN 48827:1985-03 | LIGHTNING PROTECTION SYSTEM; ROOF CONDUCTOR HOLDERS FOR HIGHLY COMBUSTIBLE ROOFS; DRIPPING SUPPORT AND STRAIN BLOCK |
| DIN 2908-1:1979-02 | OVAL BLANK PLUGS; ASSEMBLY |
| DIN 2240-2:2001-12 | CLAMPSRICAL PRODUCT SPECIFICATION (GPS) - HANDLES - PART 2: FOR GAUGING MEMBERS OVER 40 MM NOMINAL DIAMETER - HANDLES, FIXING SCREWS AND CLAMPS |
| DIN 43765:1986-03 | MEASUREMENT AND CONTROL; ELECTRICAL TEMPERATURE SENSORS; THERMOMETERS WITH MOUNTING THREAD WITH BOLTED THREAD G 1/2 |
| DIN 43853:1988-04 | METER BOARDS; MAIN DIMENSIONS & TERMINATION DIMENSION |
| DIN 4545:1983-02 | OFFICE FURNITURE; FILING CABINETS WITH SOCLE; EXTERNAL DIMENSIONS |
| DIN 43733:1986-03 | MEASUREMENT AND CONTROL - ELECTRICAL TEMPERATURE SENSORS - STRAIGHT THERMOCOUPLE THERMOMETERS WITHOUT INTERCHANGEABLE SENSOR UNITS |
| DIN 7897:1990-07 | EQUIPMENT FOR OUTDOOR AND INDOOR SPORTS FACILITIES; GOAL 3M X 2M FOR BALL GAMES; DIMENSIONS, REQUIREMENTS AND TESTING |
| DIN 2079:1987-08 | 7/24 TAPERS FOR SPINDLE NOSES FOR MACHINE TOOLS |
| DIN 7952-4:1983-03 | SHEET METAL ANCHORAGE WITH THREADS; DIMENSIONS FOR TOOLS AND THEIR DESIGN |
| DIN 14309:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE A WITH SEALING RING FOR PRESSURE AND SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| DIN 7473:1983-12 | PLAIN BEARINGS; THICK-WALLED MULTILAYER PLAIN BEARINGS WITH CYLINDRICAL BORE, UNDIVIDED |
| DIN 14308-1:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE B WITH SEALING RING FOR PRESSURE PURPOSES - NOMINAL PRESSURE 16 |
| DIN 14341:1986-11 | ALUMINIUM ALLOY C-D ADAPTER FOR NOMINAL PRESSURE 16 |
| DIN 2211-1:1984-03 | POWER TRANSMISSION ELEMENTS - GROOVED PULLEYS FOR NARROW V-BELTS - DIMENSIONS, MATERIALS |
| DIN 71433:1989-11 | COMPRESSION COUPLINGS WITH OLIVES - T-FITTINGS AND ELBOW FITTINGS FOR USE WITH UNION NUTS |
| DIN 14940:1990-04 | FIREMEN'S HELMET - REQUIREMENTS, TESTING |
| DIN 14811-1:1990-01 | FIRE HOSES - REQUIREMENTS, TESTING, TREATMENT |
| DIN 15155:1986-12 | PALLETS - BOX PALLET WITH MESH SIDE PANELS AND 2 FRONTSIDE FLAPS |
| SAE J 2122 : 1998 | NUMBERING SYSTEM FOR SINGLE DIAMETER DRILLS |
| DIN 48852-1:1985-03 | LIGHTNING PROTECTION SYSTEM; EARTHING ROD, ONE PIECE (PROFILE EARTHING ROD) |
| DIN 272:1986-02 | TESTING OF MAGNESIA FLOOR SCREEDS |
| DIN 54451:1978-11 | TESTING OF ADHESIVES FOR METALS AND BONDED METAL JOINTS; TENSILE SHEAR TEST FOR THE DETERMINATION OF THE SHEAR STRESS-STRAIN DIAGRAM OF AN ADHESIVE IN A BONDED JOINT |
| DIN 6328-1:1980-04 | TAPER CHUCKS FOR PARALLEL SHANK, FORM A FOR TOOLS WITH DIN-DRIVING SQUARES |
| DIN 14306:1986-11 | ALUMINIUM ALLOY SOLID COUPLING TYPE D FOR PRESSURE AND SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| DIN 1591:1982-11 | PLAIN BEARINGS - LUBRICATION HOLES, LUBRICATION GROOVES AND LUBRICATION BORE RELIEFS FOR GENERAL APPLICATION |
| DIN 8919:1993-10 (Draft) | REFRIGERATION; REFRIGERANT CONTROL AND FILLING VALVES FOR CONNECTION TO REFRIGERATION FLARE TYPE FITTINGS MWP 40 |
| DIN 477-6:1983-03 | GAS CYLINDER VALVES - TEST PRESSURES 300 BAR AND 450 BAR, WITH CYLINDRICAL THREAD FOR VALVE STEM AND GAS CYLINDER NECK FOR BREATHING APPARATUS - SIZES, THREADS |
| DIN 24602:1992-01 | METAL PALLETS - NOMINAL SIZES OVER 400 MM X 600 MM - APPLICATION FOR FLEXIBLE MANUFACTURING SYSTEMS |
| DIN 24340-2:1982-11 | HYDRAULIC VALVES; MOUNTING SURFACES AND CONNECTING PLATES FOR DIRECTIONAL CONTROL VALVES |
| DIN 42801:1980-04 | CONNECTION DEVICE FOR POTENTIAL EQUALIZATION CONDUCTORS |
| DIN 234-2:1982-08 | METRIC TAPER GAUGES - TAPER RING GAUGES |
| DIN 6644-2:1987-02 | Packaging; steel drums; clamping rings with lever |
| DIN 42691:1980-01 | INDUSTRIAL SEWING MACHINES; MOTOR WITH CLUTCH WITHOUT POSITION DRIVE, MAIN DIMENSIONS, SHAFT END |
| VDE 0660-506 : 1989 | SWITCHGEAR AND CONTROLGEAR - SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - SLOTTED TRUNKING - REQUIREMENTS AND TESTS |
| DIN 6899:1988-01 | STEEL THIMBLES FOR FIBRE ROPES |
| DIN 2545:1977-09 | CAST STEEL FLANGES - NOMINAL PRESSURE 40 |
| DIN 21546:1990-08 | MINE SUPPORT - STRUT SUPPORT - MARKING |
| DIN 4800:1980-10 | DOUBLE-WALL WATER HEATERS WITH TWO FIXED STEEL COVERS FOR VERTICAL AND HORIZONTAL APPLICATION |
| DIN 41576-2:1987-06 | MINIATURE FUSES; INDICATING CARTRIDGE FUSE-LINKS 250 V, INTERCHANGEABLE, MEDIUM TIME-LAG (M) |
| DIN 41704-1:1987-07 | ELECTRICAL COMMUNICATIONS ENGINEERING; CONNECTORS WITH TWO ROWS OF CONTACTS, CONNECTION BOX AND CONNECTOR, 4- AND 8 POLES; TYPES, DIMENSIONS |
| DIN 50164:1982-07 | TESTING OF METALLIC MATERIALS; CROSS TENSION TEST ON SPOT JOINTS; PROJECTION JOINTS BY RESISTANCE WELDING AND FUSION WELDING |
| DIN 5586:1989-02 | Compressed air equipment for rail vehicles; locking screws with collar and vent |
| DIN 15173:1986-04 | INDUSTRIAL TRUCKS - FORK LIFT TRUCK CARRIERS AND LIFTING ACCESSORIES - PRINCIPAL DIMENSIONS FOR ISO FORK CARRIERS |
| DIN 14711-1:1988-08 | SCALING LADDER MADE FROM WOOD |
| DIN 26026:1982-06 | TANK WAGONS - FLOOR OPERATED FILLING AND EMPTYING DEVICE FOR PRESSURE GAS TANK WAGONS |
| DIN 42707:1980-06 | INDUSTRIAL SEWING MACHINES; MOTOR WITH CLUTCH FOR POSITION DRIVE, TYPE TEST |
| DIN 52348:1985-02 | TESTING OF GLASS AND PLASTICS; ABRASION TEST; SAND TRICKLING METHOD |
| DIN 2547:1977-09 | CAST STEEL FLANGES - NOMINAL PRESSURE 100 |
| DIN 54345-5:1985-07 | TESTING OF TEXTILES; ELECTROSTATIC BEHAVIOUR; DETERMINATION OF ELECTRICAL RESISTANCE OF STRIPS OF TEXTILE FABRICS |
| DIN 1414:1977-10 | TWIST DRILLS OF HIGH-SPEED STEEL - TECHNICAL SPECIFICATIONS |
| DIN 14301:1985-04 | Aluminium alloy delivery and suction coupling type D; nominal pressure |
| DIN 4549:1982-11 | OFFICE FURNITURE; DESKS, MACHINE OPERATOR'S DESKS AND DISPLAY WORK DESKS; DIMENSIONS |
| DIN 15207-2:1988-04 | CONTINUOUS MECHANICAL HANDLING EQUIPMENT - IDLERS FOR BELT CONVEYORS FOR UNIT LOADS - MAIN DIMENSIONS OF IDLERS |
| DIN 43769:1986-03 | MEASUREMENT AND CONTROL; ELECTRICAL TEMPERATURE SENSORS; THERMOMETERS WITHOUT ADDITIONAL PROTECTING TUBES |
| VDE 0604-2 : 1986 | TRUNKING MOUNTED ON WALLS AND CEILINGS FOR ELECTRICAL INSTALLATIONS - PART 2: TRUNKING FOR APPLIANCES |
| DIN 15174:1988-04 | INDUSTRIAL TRUCKS - FORK ARMS FOR FORK LIFT TRUCKS EQUIPPED WITH ISO FORK CARRIERS - PRINCIPAL DIMENSIONS |
| DIN 42562-2:1987-04 | TRANSFORMERS - DEHYDRATING BREATHER - CAPACITY 1.2 TO 4.8 KG - COMPONENTS |
| DIN 55222-1:1980-09 | MACHINE TOOLS - PRESS BRAKES - SIZES |
| DIN 3341:1989-07 | PLATE VALVES FOR DISPLACEMENT COMPRESSORS; SUCTION VALVES, DISCHARGE VALVES; MAIN DIMENSIONS, MATERIALS, INSTALLATION |
| DIN 14317:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE C WITH METALLIC SEALING AREA AND WITH CAST IRON COVER OR WITH ALUMINIUM ALLOY COVER, TYPE C - NOMINAL PRESSURE 16 |
| DIN 7954:1983-03 | HARDWARE; HINGES ROLLED |
| DIN 2909-1:1979-02 | ROUND BLANK PLUGS: ASSEMBLY |
| DIN 26020:1981-03 | TANK WAGONS - DOMES FOR MINERAL OIL TANK WAGONS - MOUNTING- AND CONNECTING DIMENSIONS - COMPONENT PARTS |
| DIN 3761-8:1984-01 | ROTARY SHAFT LIP TYPE SEALS FOR AUTOMOBILES; TEST; CARRYING OUT AXLE SECTIONS |
| DIN 14332:1986-11 | Aluminium alloy delivery coupling type C; nominal pressure 16; used for fire hoses C 42 |
| DIN 14365-2:1986-09 | MULTI PURPOSE BRANCH PIPES FOR NOMINAL PRESSURE 16 - REQUIREMENTS, TESTING |
| DIN 65154:1982-07 | AEROSPACE; IDENTIFICATION PLATES FOR DATUMS ON WORKSHOP FACILITIES |
| DIN 53151:1981-05 | TESTING OF PAINTS, VARNISHES AND SIMILAR COATING MATERIALS; CROSS-CUT TEST AN PAINT COATINGS AND SIMILAR COATINGS |
| DIN 8063-4:1983-09 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - BRUSHINGS, FLANGES, GASKETS - DIMENSIONS |
| DIN 48829:1985-03 | LIGHTNING PROTECTION SYSTEM; ROOF CONDUCTOR HOLDERS, CONDUCTOR HOLDERS AND FIXING PLATES FOR FLAT ROOFS |
| DIN 28404:1986-10 | VACUUM TECHNOLOGY - FLANGES - DIMENSIONS |
| DIN 43620-6:1987-03 | LOW-VOLTAGE HIGH-RUPTURING-CAPACITY FUSES WITH BLADE CONTACTS; BUS MOUNTING FUSE-BASES, LV HRC BUS-MOUNTING FUSE-DISCONNECTORS AND LV HRC BUS-MOUNTING FUSE-SWITCHES UP TO AC 660 V |
| DIN 6327-1:1985-06 | ADJUSTABLE ADAPTORS FOR TOOLS WITH MORSE TAPER SHANKS, SHORT TYPES |
| DIN 4803:1980-10 | DOUBLE-WALL WATER HEATERS WITH COVER TO BE UNSCREWED, OF STEEL |
| DIN 4807-2:1991-05 | EXPANSION VESSELS - OPEN AND CLOSED EXPANSION VESSELS USED IN THERMIC SYSTEMS - CALCULATION, REQUIREMENTS AND TESTING |
| DIN 8320:1985-01 | SCREWDRIVERS FOR SLOTTED SCREWS FOR FINE MECHANICS |
| DIN 19214-1:1985-07 | FLOW MEASUREMENT - DIFFERENTIAL PRESSURE DEVICES WITH FLANGES TAPS - NOMINAL DIAMETER 50 TO 500, NOMINAL PRESSURE 10 TO 100 - SEALING SURFACE RAISED FACE |
| DIN 65034:1992-06 | Aerospace; castings of steel, nickel- and cobalt alloys; technical specification; inactive for new design |
| DIN 16962-13:1987-06 | PIPE JOINT AND FITTINGS OF POLYPROPYLENE (PP) PRESSURE PIPES - TYPE 1 AND TYPE 2, THREADED PIPE JOINTS - DIMENSIONS |
| DIN 48805:1989-08 | LIGHTNING PROTECTION SYSTEM; ROD HOLDERS |
| DIN 25400:1991-02 | BASIC SYMBOL FOR IONIZING RADIATION |
| DIN 7168-2:1986-07 | GENERAL TOLERANCES - GEOMETRICAL TOLERANCES |
| DIN 65298:1988-12 | AEROSPACE; UNIVERSAL JOINTS, NEEDLE BEARING SUPPORTED, LONG-TIME LUBRICATED, FOR ROTARY SHAFTS; SINGLE JOINTS; CONNECTION DIMENSIONS, LOADS, MASSES |
| DIN 15063:1977-12 | LIFTING APPLIANCES; SHEAVES, TECHNICAL CONDITIONS |
| DIN 6355:1980-01 | CLAMPING DEVICES; MILLING MACHINE ARBORS WITH TAPER |
| DIN 82024:1990-08 | ROUND EYE PLATES |
| DIN 808:1984-08 | MACHINE TOOLS; CARDAN JOINTS; SIZES, CONNECTING DIMENSIONS, LOADING, INSTALLATION |
| DIN 43590-3:1990-04 | LEAD-ACID BATTERIES; MONOBLOC-BATTERIES FOR STARTING INTERNAL COMBUSTION ENGINES; CONNECTION TERMINAL AND CABLE SOCKET |
| DIN 10759-2:1998-05 | ANALYSIS OF HONEY - DETERMINATION OF SACCHARASE ACTIVITY - PART 2: HADORN METHOD |
| DIN 4922-1:1978-02 | STEEL FILTER PIPES FOR DRILLED WELLS AND SLOT PERFORATION AND FISCHING (BUTT STRAP JOINT) |
| DIN 55220:1980-03 | MACHINE TOOLS - SWIVEL BENDING MACHINE - SIZES |
| DIN 55026:1980-03 | MACHINE TOOLS - SPINDLE NOSES WITH CENTERING TAPER AND FLANGE - DIMENSIONS |
| DIN 55211:1980-03 | MACHINE TOOLS - BEADING MACHINES WITH SWIVELING TOP SHAFT - SIZES |
| DIN 55212:1980-03 | MACHINE TOOLS - BEADING MACHINES WITH PARALLEL ADJUSTABLE TOP SHAFT - SIZES |
| DIN 7274-1:1981-09 | PACKAGING; STEEL CANISTERS WITH NOMINAL VOLUMES OF 5, 10 AND 20 l; DIMENSIONS |
| DIN 1684-1:1998-08 | ROUGH CASTINGS OF MALLEABLE IRON - GENERAL TOLERANCES AND MACHINING ALLOWANCES |
| DIN 406-2:1981-08 | DIMENSIONING ON DRAWINGS - RULES |
| DIN 1685-1:1998-08 | ROUGH CASTINGS OF CAST IRON WITH SPHEROIDAL GRAPHITE - GENERAL TOLERANCES, MACHINING ALLOWANCES |
| DIN 28005-1:2011-08 | Tolerances for vessels - Part 1: Vessels of metallic materials |
| DIN 7526:1969-01 | STEEL DROP FORGINGS - TOLERANCES |
| DIN 58165:1972-02 | PERMISSIBLE DEVIATIONS FOR OPTICAL COMPONENTS; DIMENSIONS WITHOUT TOLERANCE INDICATIONS, ERRORS FOR MATERIAL AND FABRICATION |
| DIN 6129-1:2008-09 | MEANS OF PACKAGING - BOTTLES AND HOLLOW-WARE FROM GLASS - PART 1: GENERAL TOLERANCES FOR AUTOMATIC PRODUCED BOTTLES |
| DIN 1683-1:1998-08 | ROUGH STEEL CASTINGS - GENERAL TOLERANCES, MACHINING ALLOWANCES |
| DIN 7184-1:1972-05 | TOLERANCES OF FORM AND POSITION; DEFINITIONS, INDICATION ON DRAWINGS |
| DIN 7168-2:1986-07 | GENERAL TOLERANCES - GEOMETRICAL TOLERANCES |
| DIN 1686-1:1998-08 | ROUGH CASTINGS OF GREY IRON - GENERAL TOLERANCES - MACHINING ALLOWANCES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.