DIN EN 10255:2015-05 (Draft)
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methods; German and English version prEN 10255:2015
Hardcopy , PDF
26-06-2024
German, German - English
01-05-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Einteilung und Bezeichnung
5 Bestellangaben
5.1 Verbindliche Angaben
5.2 Optionen
5.3 Bestellbeispiele
6 Herstellverfahren
6.1 Stahlherstellung
6.2 Rohrherstellung
7 Lieferbedingungen
7.1 Allgemeines
7.2 Alternative Beschaffenheit und Schutz
der Rohrenden
7.3 Eignung zum Schmelztauchverzinken
7.4 Schmelztauchverzinkte Ausführung
8 Anforderungen
8.1 Allgemeines
8.2 Chemische Zusammensetzung und
mechanische Eigenschaften
8.3 Oberflächenbeschaffenheit
8.4 Masse, Masse und Grenzabmasse
8.5 Dichtheit
8.6 Gefährliche Stoffe
8.7 Brandverhalten
9 Prüfung
9.1 Allgemeines
9.2 Prüfbescheinigungen
9.3 Zugversuch
9.4 Biegeversuch
9.5 Ringfaltversuch
9.6 Dichtheitsprüfung
9.7 Masskontrolle
9.8 Sichtprüfung
10 Kennzeichnung
11 Temporärer Oberflächenschutz
12 Konformitätsbe
12.1 Allgemeines
12.2 Erstprüfung (ITT)
12.3 Werkseigene Produktionskontrolle (WPK)
Anhang A (informativ) Zusammenhang zwischen
Nennaussendurchmesser, Gewindegrösse und
Nennweite
Anhang B (normativ) Rohrarten mit Wanddicken, die
von den entsprechenden Werten für die mittlere
und schwere Reihe abweichen
Anhang ZA (informativ) Abschnitte in dieser
Europäischen Norm, die Bestimmungen der
EG-Bauproduktenrichtlinie
für die Anwendung des Mandats M 131 betreffen
This standard is included in DIN Handbook 15, 15-1, 62-1, 91, 403/1 and 403. Describes the requirements for circular non-alloy steel tubes suitable for welding and threading and provides a number of options for the finish of tube ends and coatings.
| DevelopmentNote |
Supersedes DIN 2440, and DIN 2441 (11/2004) DRAFT 2015 issued in May 2015. (05/2015)
|
| DocumentType |
Draft
|
| Pages |
69
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| Standards | Relationship |
| UNI EN 10255 : 2007 | Identical |
| UNE-EN 10255:2005 | Identical |
| SN EN 10255 : 2004 + A1 2007 | Identical |
| NF EN 10255 : 2005 + A1 2007 | Identical |
| BS EN 10255:2004 | Identical |
| NS EN 10255 : 2004 + A1 2007 | Identical |
| NEN EN 10255 : 2004 + A1 2007 | Identical |
| EN 10255:2004+A1:2007 | Identical |
| NBN EN 10255 : 2004 + A1 2007 | Identical |
| I.S. EN 10255:2004 | Identical |
| PREN 10255 : DRAFT 2010 | Identical |
| DIN 18302:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - BOREHOLE SINKING OPERATIONS |
| DIN V 4108-4:2007-06 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN 14462:2012-09 | Water conduit for fire extinguishing - Planning, installation, operation and maintenance of fire hose systems and pillar fire hydrant and underground fire systems |
| DIN 4108-4:2016-07 (Draft) | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN 1988-200:2012-05 | Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice |
| VDI 3805 Blatt 17:2016-01 | Product data exchange in the building services - Drinking water system assemblies |
| VDI 2050 Blatt 1.1:2017-07 | Requirements for technical equipment rooms - Space for service shafts |
| VDI 3805 Blatt 18:2013-09 | Product data exchange in the building services - Panel heating/cooling |
| VDI 3805 Blatt 2:2016-01 | Product data exchange in the building services - Heating value assemblies |
| VDI 3805 Blatt 32:2013-11 | Product data exchange in the building services - Distributors/collectors |
| DIN 1988-600:2010-12 | Codes of practice for drinking water installations - Part 600: Drinking water installations in connection with fire fighting and fire protection installations; DVGW code of practice |
| DIN 3387-1:2008-11 | Separable unthreaded pipe connections for metal gas pipes - Part 1: Connections for pipes with smooth ends |
| DIN HDBK 15-1 : 11ED 2009 | |
| DIN EN ISO 3822-1:2009-07 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999+Amd. 1:2008) (includes Amendment A1:2008) |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
| DIN HDBK 403/1 : 6ED 2015 | IRON AND STEEL - QUALITY STANDARDS 3/1 - SEAMLESS AND WELDED STEEL TUBES FOR PRESSURE APPLICATIONS |
| DIN HDBK 403 : 4ED 2005 | IRON AND STEEL: QUALITY STANDARDS 3 - PRESSURE VESSELS AND PIPELINES - FINE GRAIN STEEL - STEEL WITH LOW TEMPERATURE TOUGHNESS - STEEL WITH ELEVATED TEMPERATURE PROPERTIES - STEEL FOR PRESSURE APPLICATIONS - CASTINGS AND FORGINGS |
| DIN HDBK 62-1 : 8ED 2010 | WASSERVERSORGUNG 2 - GUSS-, STAHLBETON- UND STAHLROHRE FUER WASSERLEITUNGEN |
| DIN HDBK 15 : 10ED 2005 | STEEL PIPELINES 1 - STANDARDS ON DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
| DIN HDBK 91 : 11ED 2016 | BOHRARBEITEN, ARBEITEN ZUM AUSBAU VON BOHRUNGEN, WASSERHALTUNGSARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18301, ATV DIN 18302, ATV DIN 18305 |
| EN 10240:1997 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10246-1:1996 | Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| ISO 8491:1998 | Metallic materials Tube (in full section) Bend test |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10241:2000 | Steel threaded pipe fittings |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN ISO 8491:2004 | Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998) |
| ISO 8492:2013 | Metallic materials Tube Flattening test |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.