DIN EN 10297-1:2003-06
Current
The latest, up-to-date edition.
SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
Hardcopy , PDF
English, German
01-06-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole
5 Einteilung und Bezeichnung
5.1 Einteilung
5.2 Bezeichnung
6 Bestellangaben
6.1 Verbindliche Angaben
6.2 Optionen
6.3 Bestellbeispiel
7 Herstellverfahren
7.1 Stahlherstellung
7.2 Desoxidationsverfahren
7.3 Rohrherstellung und Lieferzustand
8 Anforderungen
8.1 Allgemeines
8.2 Chemische Zusammensetzung
8.3 Mechanische Eigenschaften
8.4 Anforderungen an die Härte
8.5 Härtbarkeit
8.6 Oberflächenbeschaffenheit und innere Beschaffenheit
8.7 Geradheit
8.8 Beschaffenheit der Rohrenden
8.9 Masse, längenbezogene Masse, Grenzabmasse und
statische Werte
9 Prüfung
9.1 Arten der Prüfung
9.2 Prüfbescheinigungen
9.3 Zusammenfassung der Prüfungen
10 Probenahme
10.1 Prüfumfang
10.2 Vorbereitung der Probenabschnitte und Proben
11 Prüfverfahren
11.1 Zugversuch
11.2 Kerbschlagbiegeversuch
11.3 Härtbarkeitsprüfung
11.4 Härteprüfung
11.5 Dichtheitsprüfung
11.6 Zerstörungsfreie Prüfung
11.7 Masskontrolle
11.8 Sichtprüfung
11.9 Materialidentifizierung
11.10 Wiederholungsprüfungen, Sortieren und
Nachbehandlung
12 Kennzeichnung
13 Oberflächenschutz
Anhang A (normativ) Stähle für das Einsatzhärten
Anhang B (informativ) Empfohlene
Wärmebehandlungstemperaturen
Anhang C (normativ) Anforderungen an die Härte der
wärmebehandelten Rohre
Anhang D (normativ) Härtbarkeit - Grenzwerte der
Rockwell-Härte HRC
Anhang E (normativ) Gleichungen zur Berechnung der
statischen Nennwerte
Literaturhinweise
This standard is included in DIN Handbook 404/2. Specifies the technical delivery conditions for seamless circular tubes made of non-alloy and alloy steels for mechanical and general engineering purposes.
| DevelopmentNote |
Supersedes DIN 17204 Partially supersedes DIN 1630:1984-10. (06/2003) Together with DIN EN 10296-1, DIN EN 10217-1, DIN EN 10208-1, DIN EN 10224 and DIN EN 10216-1, supersedes DIN 1626. Together with DIN EN 10216-1, DIN EN 10208-1, DIN EN 10224 and DIN EN 10217-1, supersedes DIN 1629. (02/2004)
|
| DocumentType |
Standard
|
| Pages |
43
|
| ProductNote |
Supersedes DIN 17204 Partially supersedes DIN 1630:1984-10. (ABM 06/2003) Together with DIN EN 10296-1, DIN EN 10217-1, DIN EN 10208-1, DIN EN 10224 and DIN EN 10216-1, supersedes DIN 1626. Together with DIN EN 10216-1, DIN EN 10208-1, DIN EN 10224 and DIN EN 10217-1, supersedes DIN 1629. (Mkj 02/2004)
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| SN EN 10297-1 : 2003 | Identical |
| NEN EN 10297-1 : 2003 | Identical |
| I.S. EN 10297-1:2003 | Identical |
| UNI EN 10297-1 : 2003 | Identical |
| EN 10297-1:2003 | Identical |
| NBN EN 10297-1 : 2003 | Identical |
| BS EN 10297-1:2003 | Identical |
| UNE-EN 10297-1:2004 | Identical |
| NF EN 10297-1 : 2003 | Identical |
| NS EN 10297-1 : 1ED 2003 | Identical |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 10246-1:1996 | Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| EN 10256:2000 | Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EURONORM 103 : 1971 | MICROSCOPIC DETERMINATION OF THE FERRITE OR AUSTENITIC GRAIN SIZE OF STEELS |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| DIN EN 10208-1:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| EN 10246-7:2005 | Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN ISO 642:1999 | Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| DIN 50601:1985-08 | METALLOGRAPHIC TEST METHODS; DETERMINATION OF THE FERRITIC OR AUSTENITIC GRAIN SIZE OF STEELS AND FERROUS MATERIALS |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10246-3:1999 | Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| DIN V 17006-100:1999-04 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
| DIN EN 10294-1:2005-12 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.