DIN EN 12001:2012-11
Current
The latest, up-to-date edition.
CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
Hardcopy , PDF
English
01-01-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative references
3 Terms and definitions - Symbols and abbreviated terms
4 List of significant hazards
5 Safety requirements and/or protective measures
5.1 Requirements common to all machines
5.1.1 Hazards resulting from the failure of hydraulic
or pneumatic systems
5.1.2 Risk of slipping
5.1.3 Electrical hazards
5.1.4 Emergency stop system
5.1.5 Thermal protection and exhaust fumes
5.1.6 Ergonomics
5.1.7 Power supply, control systems failures
5.2 Specific requirements for single machines
5.3 Machinery groups
5.3.1 Mobile and stationary concrete pumps and shotcreting
machines (see Annex A)
5.3.2 Mortar conveying and spraying machines (see Annex A)
5.3.3 Mobile and stationary concrete placing booms (see
Annex A)
5.3.4 Delivery line systems (see Annex A)
5.4 Control requirements (electrical and hydraulic)
5.4.1 Hopper cover
5.4.2 Pumping piston
5.4.3 Stabilizers
5.4.4 Emergency stop devices
5.4.5 Concrete placing boom incl. slewing mechanism
5.5 Stability
5.5.1 Verification of stability of placing booms on
vehicles
5.5.2 Verification of stability of placing booms on
a mobile or stationary subassembly
5.5.3 Verification of stability of placing booms on
a crane
5.5.4 Verification of stability of placing booms on
a soffit scaffolding, components or similar
6 Verification of safety requirements and/or protective
measures
6.1 Type verification
6.2 Individual verification of each unit
6.3 Final inspection
7 Information for use
7.1 Accompanying documents (in particular: instruction
handbook)
7.2 Log book
7.3 Re inspection
7.4 Mobile and stationary concrete pumps and shotcreting
machines
7.5 Mortar conveying and spraying machines
7.6 Mobile and stationary concrete placing booms
7.7 Delivery line systems
7.8 Maintenance
7.9 Identification marking
Annex A (informative) Diagrams of different machines
Annex B (normative) Log book for concrete pump and concrete
placing boom)
B.1 Preliminary remarks and assemblies
B.2 Master record sheet
B.3 Master record sheet for verification of stationary
machines
B.4 Master record sheet for verification of the other
machines
B.5 Supplements to the master record sheet
B.6 Inspection records
Annex ZA (informative) Relationship between this European Standard
and the Essential Requirements of EU Directive 98/37/EC
Bibliography
Defines the safety requirements for: - conveying machines; - spraying machines; - placing machines; and - delivery line systems for concrete and mortar.
| DocumentType |
Standard
|
| Pages |
67
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 12001 : 2012 | Identical |
| UNE-EN 12001:2013 | Identical |
| NBN EN 12001 : 2012 | Identical |
| NEN EN 12001 : 2012 | Identical |
| NS EN 12001 : 2012 | Identical |
| I.S. EN 12001:2012 | Identical |
| UNI EN 12001 : 2012 | Identical |
| BS EN 12001:2012 | Identical |
| EN 12001:2012 | Identical |
| PREN 12001 : DRAFT 2010 | Identical |
| ISO 13855:2010 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| DIN 24117:2007-02 | CONSTRUCTION EQUIPMENT AND BUILDING MATERIAL MACHINERY - DISTRIBUTING MAST FOR CONCRETE PUMPS - PRINCIPLES OF CALCULATION AND STABILITY |
| DIN 24118:2007-03 | CONSTRUCTION EQUIPMENT AND BUILDING MATERIAL MACHINERY - CONCRETE DELIVERY PIPELINES - DIMENSIONS AND CALCULATIONS |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| VDMA 24119 : 2004 | Construction and building material machines - Symbols for concrete pumps |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| VDMA 24120 : 2009 | Construction and building material machinery - Safety markings on concrete pumps |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 13855:2010 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 13309:2010 | Construction machinery - Electromagnetic compatibility of machines with internal power supply |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN ISO 2867:2011 | Earth-moving machinery - Access systems (ISO 2867:2011) |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO 2867:2011 | Earth-moving machinery Access systems |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.