DIN EN 12285-2:2005-05
Current
The latest, up-to-date edition.
WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
Hardcopy , PDF
English
01-01-2005
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe, Symbole und Abkürzungen
3.1 Begriffe
3.2 Symbole und Abkürzungen
4 Anforderungen
4.1 Bezeichnung und Bestellangaben
4.2 Werkstoffe
4.3 Bauart
4.4 Toleranzen
4.5 Mantelblechanordnung
4.6 Mannlöcher und Kontrollöffnungen
4.7 Befestigungsschrauben
4.8 Tankarmaturen, Rohre und Stutzen
4.9 Sattelfüsse, Auflager
4.10 Trageösen
4.11 Fertigung
4.12 Gefährliche Stoffe
4.13 Brandverhalten
4.14 Dauerhaftigkeit
5 Prüfung und Probenahmeverfahren
6 Konformitätsbewertung
6.1 Allgemeines
6.2 Typprüfung
6.3 Werkseigene Produktionskontrolle
7 Transport und Einbau
7.1 Transport
7.2 Einbau
8 Kennzeichnung des Tanks
8.1 Fabrikschild
8.2 Tankzertifikat
8.3 Dokumentation
Anhang ZA (informativ) Abschnitte dieser Europäischen Norm,
die Bestimmungen der EG-Bauproduktenrichtlinie
betreffen
ZA.1 Anwendungsbereich und massgebende Eigenschaften
ZA.2 Verfahren der Konformitätsbescheinigung von Stahltanks
ZA.2.1 System(e) der Konformitätsbescheinigung
ZA.2.2 EG-Zertifikat und Konformitätserklärung
ZA.3 CE-Kennzeichnung und Etikettierung
Literaturhinweise
This standard is included in DIN HDBK 183. Defines the requirements for metallic shop fabricated cylindrical, horizontal steel tanks, single and double skin for the aboveground storage of water polluting liquids (both flammable and non-flammable). Applicable for normal ambient temperature conditions (- 20 degree C to + 50 degree C).
| DevelopmentNote |
Supersedes DIN 6616. (05/2005)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 12285-2 : 1ED 2005 | Identical |
| NBN EN 12285-2 : 2005 | Identical |
| UNE-EN 12285-2:2005 | Identical |
| BS EN 12285-2:2005 | Identical |
| NEN EN 12285-2 : 2005 | Identical |
| NF EN 12285-2 : 2005 | Identical |
| UNI EN 12285-2 : 2005 | Identical |
| EN 12285-2:2005 | Identical |
| I.S. EN 12285-2:2005 | Identical |
| VDI 2067 Blatt 1:2012-09 | Economic efficiency of building installations - Fundamentals and economic calculation |
| VDI 3479:2010-08 | Emission control - Marketing installation tank farms |
| DIN HDBK 183 : 3ED 2014 | LAGERBEHAELTER FUER WASSERGEFAEHRDENDE, BRENNBARE UND NICHTBRENNBARE FLUESSIGKEITEN |
| EN 13160-7:2016 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 13617-2:2012 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| EN 13160-2:2016 | Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems |
| EN 13617-3:2012 | Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| EN 13160-6:2016 | Leak detection systems - Part 6: Sensors in monitoring wells |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| EN 13617-4:2012 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| EN 13160-3:2016 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| PREN 13160-5 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 12285-1:2003 | Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| EN 13012:2012 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| PREN 14125 : DRAFT 2011 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 13160-4:2016 | Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems |
| EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| EN 13160-1:2016 | Leak detection systems - Part 1: General Principles |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Important note : Users cannot be edited or removed once added to your Multi user PDF.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.