GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)

Available format(s)

Hardcopy , PDF

Language(s)

German, English

Published date

01-01-2015

Publisher

German Institute for Standardisation (Deutsches Institut für Normung)

€148.32

Excluding VAT

Nationales Vorwort
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe, Symbole und Abkürzungen
4 Werkstoffe
5 Anforderungen
6 Prüfung
7 Bewertung und Überprüfung der Leistungsbeständigkeit
  - AVCP
8 Bezeichnung
9 Kennzeichnung
Anhang A (normativ) - Eigenschaften von Glasfasern zur
         Verstärkung von PP-Polymeren
Anhang B (normativ) - Prüfung der Durchbiegung unter Last
Anhang ZA (informativ) - Abschnitte dieser Europäischen Norm,
          die die Bestimmungen der EU-Bauproduktenverordnung
          (EU-BauPVO) betreffen
Literaturhinweise

Pertains to manhole tops and gully tops made of Polypropylene (PP), Polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) by a moulding or extrusion process, with a clear opening up to and including 1000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.

DevelopmentNote	Supersedes DIN EN 124. Applies in conjunction with DIN EN 124-1 issue 09-2015. (09/2015)
DocumentType	Standard
Pages	42
PublisherName	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Current

Standards	Relationship
EN 124-6:2015	Identical
I.S. EN 124-6:2015	Equivalent
PREN 124-6 : DRAFT 2012	Identical

DIN 1986-100:2016-12	DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 100: SPECIFICATIONS IN RELATION TO DIN EN 752 AND DIN EN 12056
DIN 1229:2015-09	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - SECURING OF THE COVER OR GRATING WITHIN THE FRAME

ISO 4892-1:2016	Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
ISO 580:2005	Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
EN ISO 3126:2005	Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
EN 12200-1:2016	Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN ISO 8256:2004	Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN 124-2:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
EN 13598-1:2010	Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers
ISO 3506-1:2009	Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
EN ISO 4892-1:2016	Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN ISO 4892-3:2016	Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
ISO 1133-1:2011	Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
ISO 3127:1994	Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
ISO 6964:1986	Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification
EN 13598-2:2016	Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
EN 607:2004	Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
ISO 8256:2004	Plastics — Determination of tensile-impact strength
ISO 15100:2000	Plastics — Reinforcement fibres — Chopped strands — Determination of bulk density
EN ISO 9163:2005	Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
EN 13823:2010+A1:2014	Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
ISO 9163:2005	Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO 3126:2005	Plastics piping systems — Plastics components — Determination of dimensions
EN ISO 1133-1:2011	Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
ISO 4892-3:2016	Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
EN 14758-1:2012	Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
ISO 1183-1:2012	Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
EN 12666-1:2005+A1:2011	Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
ISO 1183-2:2004	Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
ISO 9001:2015	Quality management systems — Requirements
EN ISO 580:2005	Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
EN 1401-1:2009	Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN 12164:2016	Copper and copper alloys - Rod for free machining purposes
ISO 4892-2:2013	Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
EN 124-4:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
EN 16245-3:2013	Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
EN 124-3:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
EN 20105-A02:1994	Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
ISO 105-A02:1993	Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour
ISO 1888:2006	Textile glass — Staple fibres or filaments — Determination of average diameter
EN 124-5:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
EN 12201-1:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
ISO 3506-2:2009	Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts
ISO 178:2010	Plastics — Determination of flexural properties
EN ISO 4892-2:2013	Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN 513:1999	Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
EN 124-1:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
EN ISO 1183-1:2012	Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
ISO 527-1:2012	Plastics — Determination of tensile properties — Part 1: General principles
EN ISO 1183-2:2004	Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004)

Summarise

ChatGPT Perplexity

Access your standards online with a subscription

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Get in touch with us

€148.32

Excluding VAT

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Shopping Cart

DIN EN 124-6:2015-09

GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)

Shopping Cart

DIN EN 124-6:2015-09

GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Industry

Sub-Industry