DIN EN 12540:2000-07
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM
Hardcopy , PDF
01-12-2009
English
12-01-2013
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Informationen, die der Auftraggeber geben muss
5 Bezeichnung
5.1 Allgemeines
5.2 Überzugsarten
6 Wärmebehandlung
7 Prüfungen
7.1 Anforderungen an den Überzug
7.2 Prüfverfahren
Anhang A (normativ) Beziehungen zwischen
Beanspruchungsstufe und dem Merkmaleblock
des genormten Überzugssystems
Anhang B (informativ) Beanspruchungsstufe
Anhang C (informativ) Beispiele von Bezeichnungen
Anhang D (normativ) Doppel- und Dreifachnickelüberzüge
Anhang E (normativ) Bestimmung der Anzahl der
Unterbrechungen in Chromüberzügen
Anhang F (informativ) Schichtdickenmessverfahren für
die Überzüge
Anhang G (informativ) Korrosionsbeständigkeit von
Nickelüberzügen
Literaturhinweise
This standard is included in DIN Handbook 175, 286/2. Defines requirements for nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium electrodeposited coatings applies to steel, iron, zinc alloys and copper and copper alloys to provide an attractive appearance and corrosion resistance. Nickel and copper plus nickel coatings without chromium topcoats specified are suitable for applications where tarnishing is prevented by rubbing or handling in service, or by use of topcoats other than chromium. Also suitable for applications where tarnishing is of no importance.
DevelopmentNote |
To be used in conjunction with DIN EN 1403. Supersedes DIN 50967:1991-01 and DIN 50968:1991-01. (07/2000)
|
DocumentType |
Standard
|
Pages |
20
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Supersedes |
Standards | Relationship |
I.S. EN 12540:2000 | Identical |
UNI EN 12540 : 2000 | Identical |
SN EN 12540 : 2000 | Identical |
NEN EN 12540 : 2000 | Identical |
NBN EN 12540 : 2000 | Identical |
NS EN 12540 : 2000 | Identical |
UNE-EN 12540:2001 | Identical |
BS EN 12540:2000 | Identical |
NF EN 12540 : 2000 | Identical |
EN 12540 : 2000 | Identical |
DIN 50960-1:1998-10 | ELECTROPLATED COATINGS - DESIGNATION IN TECHNICAL DOCUMENTS |
BWB TL 5120-0065 : 3ED 2006 | TOOL KIT, INCHES |
BWB TL 5120-0054 : 7ED 2006 | WRENCH SET, DRIVE, 10 MM, 23 PARTS IN CASE |
BWB TL 5120-0055 : 4ED 2006 | WRENCH SET, DRIVE, 12.5 MM |
BWB TL 5120-0076 : 4ED 2006 | COMBINATION WRENCH I.A.W. DIN 3113 |
BWB TL 5120-0074 : 5ED JUL 2006 | DOUBLE-HEAD BOX WRENCH I.A.W. DIN 838 |
BWB TL 3940-0028 : 6ED 2006 | RECOVERS EQUIPMENT, VEHICLE CRANE |
BWB TL 5120-0140 : 2ED 2012 | KEY SET, SOCKET HEAD DRIVE HEAD GAUGE INCH, 11 ITEMS |
BWB TL 4910-0059 : 3ED 2004 | |
BWB TL 5120-0082 : 4ED 2007 | WRENCH KIT, 6.3 MM DRIVE |
BWB TL 5120-0132 : 2ED 2007 | TORX TOOLS |
DIN 50960-2:2006-01 | Electroplated coatings - Part 2: Indications on technical drawings |
BWB TL 5120-0101 : 1ED 2004 | KLEINE DOPPELMAULSCHLUESSEL MIT GLEICHER SCHLUESSELWEITE UND UNGLEICHER MAULSTELLUNG |
BWB TL 5120-0120 : 1ED 2005 | |
BWB TL 4240-0046 : 7ED 2001 | RECOVERY EQUIPMENT, HYDRAULIC |
BWB TL 5120-0078 : 3ED 2006 | DOUBLE-HEAD BOX WRENCHES I.A.W. DIN 837 |
BWB TL 5180-0083 : 14ED 2007 | TOOL KIT; INSTRUMENT REPAIRMAN'S |
BWB TL 5120-0135 : 1ED 2007 | STRAP SPANNER WITH VARIOUS CLAMPING RANGES |
BWB TL 5120-0121 : 4ED 2008 | SUPPLEMENTAL TOOLS FOR SOCKET WRENCH KITS |
BWB TL 5120-0104 : 2ED 2007 | SCREWDRIVER WITH INVERTIBLE BLADE |
BWB TL 5120-0102 : 1ED 2005 | SCREWDRIVER BITS WITH SQUARE DRIVE FOR HEXAGON SOCKET SCREWS, HAND OPERATED DIN 7422 |
BWB TL 5120-0110 : 1ED 2005 | |
BWB TL 5120-0001 : 6ED 2007 | DOUBLE OPEN-END WRENCH |
BWB TL 5120-0057 : 6ED 2006 | WRENCH SET, DRIVE, 25 MM |
ISO 4526:2004 | Metallic coatings Electroplated coatings of nickel for engineering purposes |
EN ISO 1462 : 1995 | METALLIC COATINGS - COATINGS OTHER THAN THOSE ANODIC TO THE BASIS METAL - ACCELERATED CORROSION TESTS - METHOD FOR THE EVALUATION OF THE RESULTS |
EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
EN ISO 4541:1994 | Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978) |
EN ISO 3497:2000 | Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000) |
EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
EN ISO 8401:2017 | Metallic coatings - Review of methods of measurement of ductility (ISO 8401:2017) |
EN ISO 2361:1995 | Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982) |
EN ISO 2177:2004 | Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003) |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 6158:2011 | Metallic and other inorganic coatings Electrodeposited coatings of chromium for engineering purposes |
EN 1403:1998 | Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.