DIN EN 13370:2003-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-]
Available format(s)
Hardcopy , PDF
Superseded date
01-02-2012
Superseded by
Language(s)
English
Published date
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sample pre-treatment
5 Blank determination
6 Interference
7 Selection of the suitable test method
8 Expression of results
9 Test report
Annex A (informative) - Validation of EN 13370
A.1 - General
A.2 - Interlaboratory study
A.3 - Selection of Laboratories
A.4 - Selection of samples
A.5 - Validation scope
A.6 - Results and statistics
A.7 - Conclusion
Bibliography
Describes methods for the determination of the parameters Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN[-], F[-] in aqueous eluates for the characterization of waste.
| DevelopmentNote |
Supersedes DIN V ENV 13370 (10/2003)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN 13370 : 2004 | Identical |
| NS EN 13370 : 1ED 2003 | Identical |
| EN 13370:2003 | Identical |
| I.S. EN 13370:2003 | Identical |
| NF EN 13370 : 2004 | Identical |
| SN EN 13370 : 2003 | Identical |
| BS EN 13370:2003 | Identical |
| NEN EN 13370 : 2003 | Identical |
| NBN EN 13370 : 2003 | Identical |
| UNE-EN 13370:2004 | Identical |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| EN ISO 14403:2002 | Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002) |
| EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
| EN 1483:2007 | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
| DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
| EN 27888:1993 | Water quality - Determination of electrical conductivity (ISO 7888:1985) |
| DIN 38405-13:1981-02 | GERMAN STANDARD METHODS FOR THE ANALYSIS OF WATER, WASTE WATER AND SLUDGE; ANIONS (GROUP D); DETERMINATION OF CYANIDES (D 13) |
| EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
| DIN ISO 5725-6:2002-08 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| EN 1484:1997 | Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
| DIN ISO 5725-3:2003-02 | Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001) |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
| ISO 6703-2:1984 | Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide |
| ISO 6439:1990 | Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation |
| ISO 10359-1:1992 | Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water |
| ENV ISO 13530:1998 | Water quality - Guide to analytical quality control for water analysis (ISO/TR 13530:1997) |
| DIN 38409-16:1984-06 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; GENERAL MEASURES OF EFFECTS AND SUBSTANCES (GROUP H); DETERMINATION OF THE PHENOL INDEX (H 16) |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| DIN ISO 5725-5:2002-11 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 12506:2003 | Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn |
| DIN ISO 5725-4:2003-01 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD |
| ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| EN ISO 14402:1999 | Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999) |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
| EN 1485 : 1996 | WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.