DIN EN 13500:2003-12
Current
The latest, up-to-date edition.
THERMAL INSULATION PRODUCTS FOR BUILDINGS - EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) BASED ON MINERAL WOOL - SPECIFICATION
Hardcopy , PDF
German, English
01-01-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviated terms
3.1 Terms and definitions
3.2 Symbols, units and abbreviated terms
4 Requirements
4.1 General
4.2 Thermal resistance
4.3 Mechanical resistance and stability of the system
4.3.1 Bond strength of the base coat to the MW board
4.3.2 Bond strength of the adhesive to the MW board for ETICS
fixed by an adhesive
4.3.3 Pull-off resistance of the ETICS fixed by mechanical fixing
4.4 Reaction to fire
4.5 MW boards
4.6 Tensile strength of the reinforcement
4.7 Liquid water permeability of the system surface
4.8 Resistance to impact
4.9 Resistance to penetration
4.10 Water vapour permeability
4.11 Durability and adhesion of the finishing material on the base
coat
5 Test methods
5.1 Sampling
5.2 Conditioning
5.2.1 Conditioning of the test specimen for the determination of
the tensile bond strength of the adhesive to the thermal
insulation material
5.2.2 Conditioning of the test specimen in accordance with
EN 1062-11 for the determination of the tensile bond
strength of the base coat to the thermal insulation
material, liquid water permeability of the system surface,
resistance to impact, resistance to penetration, water
vapour permeability, durability and adhesion of the
finishing material on the base coat
5.3 Testing
6 Designation code
7 Evaluation of conformity
8 Marking and labelling
8.1 The entire and specific information of all components of the kit
has to be given on an accompanying document that contains:
8.2 Components conforming to this standard shall be clearly
marked, either on the product or on the label with the following
information:
8.3 Additional information:
8.3.1 Reinforcement
8.3.2 Adhesive
8.3.3 Base coat
8.3.4 Finishing coat
8.3.5 MW-Boards
8.3.6 Rails
8.3.7 Anchors
Annex A (normative) Factory production control
Annex B (informative) Additional information for customer and
designers
B.1 Resistance of the systems surface to cracking
Bibliography
Describes the requirements for factory made products for external thermal insulation composite systems (ETICS) based on mineral wool, delivered as a kit, and used as thermal insulation for buildings.
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 13500 : 2004 | Identical |
| NEN EN 13500 : 2003 | Identical |
| NS EN 13500 : 1ED 2003 | Identical |
| I.S. EN 13500:2003 | Identical |
| UNE-EN 13500:2004 | Identical |
| SN EN 13500 : 2003 | Identical |
| UNI EN 13500 : 2005 | Identical |
| BS EN 13500:2003 | Identical |
| EN 13500:2003 | Identical |
| DIN 4108-3:2014-11 | THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 3: PROTECTION AGAINST MOISTURE SUBJECT TO CLIMATE CONDITIONS - REQUIREMENTS AND DIRECTIONS FOR DESIGN AND CONSTRUCTION |
| DIN 18345:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - THERMAL INSULATION COMPOSITE SYSTEMS |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| EN 12085:2013 | Thermal insulating products for building applications - Determination of linear dimensions of test specimens |
| EN 13498:2002 | Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS) |
| EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
| EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 13494:2002 | Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| EN 13162:2012+A1:2015 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| EN 13495:2002 | Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test) |
| EN ISO 7783-2:1999 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999) |
| EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
| EN ISO 13788:2012 | Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012, Corrected version 2020-05) |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN 13496:2013 | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS) |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| EN 13497:2002 | Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.