DIN EN 13760:2003-11
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Automotive LPG filling system for light and heavy duty vehicles - Nozzle; Test requirements and dimensions
Hardcopy , PDF
28-02-2022
English, German
01-11-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative references
3 Terms and definitions
4 Design and construction requirements
4.1 General
4.2 Service gasket
4.3 Specific requirements
4.3.1 Light duty vehicle filling nozzle
4.3.2 Heavy duty vehicle filling nozzle
4.4 Requirements for connection and disconnection by rotation
4.5 Requirements for connection and disconnection by movement
in the longitudinal axis of the filling nozzle
(push and pull)
4.6 Requirements for lever operation
4.7 Requirements for non-metallic materials
5 Test procedures
5.1 General
5.2 Overpressure test
5.2.1 General
5.2.2 Test procedure
5.2.3 Interpretation of the test
5.2.4 Re-testing
5.3 External leak tests
5.3.1 General
5.3.2 Test of the unconnected filling nozzle
5.3.3 Test of the connected filling nozzle
5.3.4 Production testing
5.4 Endurance test
5.4.1 General
5.4.2 Test procedure
5.4.3 Test interpretation
5.4.4 Re-testing
5.5 LPG compatibility test (for rubber materials)
5.5.1 Test procedure
5.5.2 Test interpretation
5.5.3 Re-testing
5.6 Corrosion resistance test
5.6.1 Test procedure
5.6.2 Test interpretation
5.6.3 Re-testing
5.7 Resistance to dry heat test
5.7.1 General
5.7.2 Test procedure
5.7.3 Test interpretation
5.7.4 Re-testing
5.8 Ozone ageing test
5.8.1 General
5.8.2 Test procedure
5.8.3 Test interpretation
5.8.4 Re-testing
5.9 Temperature cycle test
5.9.1 Test procedure
5.9.2 Test interpretation
5.9.3 Re-testing
5.10 Drop test
5.10.1 Test procedure
5.10.2 Test interpretation
5.10.3 Re-testing
5.11 Electrical continuity test of the filling nozzle
5.11.1 Test procedure
5.11.2 Test interpretation
5.11.3 Re-testing
5.12 Freezing test
5.12.1 Test procedure
5.12.2 Test interpretation
5.12.3 Re-testing
6 Markings
Annex A (normative) Critical dimensions of the filling nozzles
Annex B (normative) Critical dimensions of the filling units
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other provisions
of EU Directives
Bibliography
Describes the minimum design, construction, test requirements and the critical dimensions for filling nozzles for the dispensing of the automotive Liquefied Petroleum Gas (LPG) to vehicles of categories M and N, that are fitted with the Euro unit.
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NEN EN 13760 : 2003 | Identical |
| SN EN 13760 : 2003 | Identical |
| NF EN 13760 : 2004 | Identical |
| I.S. EN 13760:2003 | Identical |
| UNI EN 13760 : 2004 | Identical |
| NS EN 13760 : 1ED 2003 | Identical |
| UNE-EN 13760:2004 | Identical |
| EN 13760:2003 | Identical |
| NBN EN 13760 : 2003 | Identical |
| BS EN 13760:2003 | Identical |
| ONORM EN 13760 : 2003 | Identical |
| ASTM B 154 : 2016 : REDLINE | Standard Test Method for Mercurous Nitrate Test for Copper Alloys |
| EN 12806:2003 | Automotive liquefied petroleum gas components - Other than containers |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| EN 589:2008+A1:2012 | Automotive fuels - LPG - Requirements and test methods |
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
| EN ISO 11114-2:2013 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.