• There are no items in your cart

1994/9/EC : 1994

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES

Available format(s)

Hardcopy

Superseded date

11-09-2022

Language(s)

English

Published date

12-01-2013

DocumentType
Miscellaneous Product
Pages
29
PublisherName
European Union
Status
Superseded
SupersededBy

EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
09/30182356 DC : 0 BS EN 12581:2005/A1 - COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNE-EN ISO 18081:2017 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016)
10/30219414 DC : 0 BS EN 13617-4 - PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
PD CEN/TR 15339-3:2014 Thermal spraying. Safety requirements for thermal spraying equipment Torches for thermal spraying and their connection and supply units
DIN EN 14591-4:2007-09 Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
I.S. EN 12079-1:2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING
05/19976635 DC : 0 BS EN 15188 - DETERMINATION OF THE SPONTANEOUS IGNITION BEHAVIOUR OF DUST ACCUMULATIONS
NF EN 50176 : 2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
BS ISO 16924 : 2016 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
PREN 1127-1 : DRAFT 2017 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
12/30262935 DC : 0 BS EN 15339-4 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY
PD CEN/TR 15339-6:2014 Thermal spraying. Safety requirements for thermal spraying equipment Spray booth, Handling system, Dust collection, Exhaust system, Filter
UNI EN 13237 : 2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
BS EN 15794:2009 Determination of explosion points of flammable liquids
05/30134150 DC : DRAFT MAY 2005 EN 15233 - METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
BS EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
11/30239006 DC : 0 BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
PD CEN/TS 54-32:2015 Fire detection and fire alarm systems Planning, design, installation, commissioning, use and maintenance of voice alarm systems
BS 8608:2014 Specification for radio telemetry systems for use with respiratory protective devices used by emergency first responders
05/30103133 DC : 0 BS EN 15276 - FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 2: DESIGN, INSTALLATION AND MAINTENANCE
DIN EN ISO 11135:2014-10 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014)
CEN/TR 15339-4:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply
PD CEN/TR 15339-1:2014 Thermal spraying. Safety requirements for thermal spraying equipment General requirements
BS EN 50625-2-3:2017 Collection, logistics & treatment requirements for WEEE Treatment requirements for temperature exchange equipment and other WEEE containing VFC and/or VHC
BS EN 50281-1-2:1999 Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Selection, installation and maintenance
07/30163456 DC : 0 BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
NF EN 60079-15 : 2010 EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
CSA Z11135 : 2015 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
04/30115503 DC : DRAFT JUN 2004 EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
NF EN 15268 : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND SUBMERSIBLE PUMP ASSEMBLIES
BS EN 62013-1:2006 Caplights for use in mines susceptible to firedamp General requirements. Construction and testing in relation to the risk of explosion
EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
CEI EN 50495 : 2011 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
I.S. EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
PREN 13012 : DRAFT 2010 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
S.R. CEN/TR 15339-4:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY
ANSI/AAMI/ISO 11135:2014 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
I.S. EN 50574-1:2012 COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR END-OF-LIFE HOUSEHOLD APPLIANCES CONTAINING VOLATILE FLUOROCARBONS OR VOLATILE HYDROCARBONS
I.S. EN 15714-2:2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
ISO/IEC 80079-38:2016 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
16/30341165 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DEFSTAN 66-31(PT5)/2(2008) : 2008 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 5: CONTRACTOR REQUIREMENTS - LAND USE APPLICATION
DIN EN ISO/IEC 80079-38:2012-08 (Draft) EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
DIN EN 12409:2011-12 Plastics and rubber machines - Thermoforming machines - Safety requirements
DIN EN 1422:2014-08 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
IEEE 1566-2015 REDLINE IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger
EN 13617-4:2012 Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
BS EN 13980:2002 Potentially explosive atmospheres. Application of quality systems
BS EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements
BS EN 14994:2007 Gas explosion venting protective systems
BS EN 12111:2014 Tunnelling machines. Road headers and continuous miners. Safety requirements
UNE-EN 1127-1:2012 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
BS EN 618 : 2002
BS EN 61241-18:2004 Electrical apparatus for use in the presence of combustible dust Protection by encapsulation \'mD\'
BS EN 14034-1 : 2004 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE P[MAX] OF DUST CLOUDS
ISO 11135-1:2007 Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
BS EN 14983:2007 Explosion prevention and protection in underground mines. Equipment and protective systems for firedamp drainage
BS EN 13763-26:2004 Explosives for civil uses. Detonators and relays Definitions, methods and requirements for devices and accessories for reliable and safe functioning of detonators and relays
BS EN 14797:2006 Explosion venting devices
BS EN 14373:2005 Explosion suppression systems
BS EN 13617-3:2012 Petrol filling stations Safety requirements for construction and performance of shear valves
BS EN 12409 : 2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
BS EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions
DIN EN 1127-2:2002-07 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
EN 1010-2:2006+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
EN 1114-1:2011 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
EN 60079-25:2010/AC:2013 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010)
EN 62013-1:2006 Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 13463-6:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b'
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 12547:2014 Centrifuges - Common safety requirements
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
CEN/TR 16793:2016 Guide for the selection, application and use of flame arresters
EN 13237:2012 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
EN 50177:2009/A1:2012 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
I.S. EN 13760:2003 AUTOMOTIVE LPG FILLING SYSTEM FOR LIGHT AND HEAVY DUTY VEHICLES - NOZZLE, TEST REQUIREMENTS AND DIMENSIONS
EN 12779:2015 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety requirements
EN 60079-29-4:2010 Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases
EN 60079-31:2014 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 13463-8:2003 Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k'
EN 60079-27:2008 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
EN 50050:2006 Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment
DEFSTAN 66-31(PT1)/2(2008) : 2008 BASIC REQUIREMENTS AND TESTS FOR ELECTRONIC AND ELECTRICAL TEST AND MEASUREMENT EQUIPMENT - PART 1: INTRODUCTION AND GUIDE TO THE SPECIFICATION AND SELECTION OF TEST AND MEASUREMENT EQUIPMENT BY THE PROCURING AUTHORITY
DEFSTAN 66-31(PT2)/1(2007) : 2007 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 2: CONTRACTOR GENERAL REQUIREMENTS
DEFSTAN 66-31(PT3)/2(2008) : 2008 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 3: CONTRACTOR REQUIREMENTS - AIR USE APPLICATION
DEFSTAN 66-31(PT3)/1(2007) : 2007 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 3: CONTRACTOR REQUIREMENTS - AIR USE APPLICATION
DEFSTAN 66-31(PT1)/1(2007) : 2007 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 1: INTRODUCTION AND GUIDE TO THE SPECIFICATION AND SELECTION OF TEST AND MEASUREMENT EQUIPMENT BY THE PROCURING AUTHORITY
DEFSTAN 66-31(PT2)/2(2008) : 2008 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 2: CONTRACTOR GENERAL REQUIREMENTS
PD 6686:2006 Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries
PREN 1422 : DRAFT 2011 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
I.S. CEN TR 15473:0 CHARACTERIZATION OF SLUDGES - GOOD PRACTICE FOR SLUDGES DRYING
12/30258579 DC : 0 BS 5908-1 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 1: CODE OF PRACTICE FOR PRECAUTIONS AGAINST FIRE AND EXPLOSION IN CHEMICAL PLANTS, CHEMICAL STORAGE AND SIMILAR PREMISES
UNI EN 13175 : 2015 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
I.S. 328:2015/AC1:2015 GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4)
UNE-EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
13/30280729 DC : 0 BS EN 12186 - GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
NF EN 60079-29-1 : 2008 EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
NF EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
14/30295916 DC : 0 BS EN 1839 - DETERMINATION OF EXPLOSION LIMITS OF GASES AND VAPOURS AND DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION (LOC) FOR FLAMMABLE GASES AND VAPOURS
14/30286897 DC : 0 PD 8010-1 - PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE
BS 5908-2:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations
UNI EN 16447 : 2014 EXPLOSION ISOLATION FLAP VALVES
UNE-EN 13175:2015 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
PD CEN/TR 16793:2016 Guide for the selection, application and use of flame arresters
12/30267131 DC : 0 BS EN 16447 - EXPLOSION ISOLATION FLAP VALVES
BS EN 50574-1:2012 Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
BS EN 50281-1-1:1999 Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing
BS EN ISO/IEC 80079-34:2011 Explosive atmospheres Application of quality systems for equipment manufacture
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
11/30252448 DC : 0 BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
BS EN 50574 : 2012 COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR END-OF-LIFE HOUSEHOLD APPLIANCES CONTAINING VOLATILE FLUOROCARBONS OR VOLATILE HYDROCARBONS
02/541056 DC : DRAFT DEC 2002 EN 14591-1 - EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINING - PROTECTIVE SYSTEMS - PART 1: 2-BAR EXPLOSION-PROOF VENTILATION STRUCTURE
DEFSTAN 66-31(PT4)/1(2007) : 2007 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 4: CONTRACTOR REQUIREMENTS - NAVAL USE APPLICATION
CEN/TR 15339-5:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed units
I.S. EN 60079-27:2008 EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
PREN 14973 : DRAFT 2013 CONVEYOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS
EN 474-1:2006+A5:2018 Earth-moving machinery - Safety - Part 1: General requirements
CEN/TR 15339-6:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter
BS EN 60079-27:2008 Explosive atmospheres Fieldbus intrinsically safe concept (FISCO)
BS 1339-3:2004 Humidity Guide to the measurement of humidity
I.S. EN ISO 11135:2014 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014)
11/30244091 DC : 0 BS EN ISO 11135 - STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
04/30113208 DC : DRAFT MAY 2004 EN 14591-2 - EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINING - PROTECTIVE SYSTEMS - PART 2: WATER TROUGH BARRIERS
17/30320919 DC : 0 BS EN 50625-2-3 - COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 2-3: TREATMENT REQUIREMENTS FOR TEMPERATURE EXCHANGE EQUIPMENT AND OTHER WEEE CONTAINING VFC AND/OR VHC
BS EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material. Safety requirements
BS EN 15268:2008 Petrol filling stations. Safety requirements for the construction of submersible pump assemblies
CEI EN 50176 : 2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
10/30227671 DC : 0 BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
12/30270980 DC : 0 BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
ISO 13577-1:2016 Industrial furnaces and associated processing equipment Safety Part 1: General requirements
BS PAS 111(2012) : 2012 SPECIFICATION FOR THE REQUIREMENTS AND TEST METHODS FOR PROCESSING WASTE WOOD
PREN 12186 : DRAFT 2013 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
12/30262926 DC : 0 BS EN 15339-5 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 5: POWDER AND WIRE FEED UNITS
PD CEN/TR 15276-2:2009 Fixed firefighting systems. Condensed aerosol extinguishing systems Design, installation and maintenance
PREN 14986 : DRAFT 2014 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN 50176:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN ISO 18081:2016 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING (AT) - LEAK DETECTION BY MEANS OF ACOUSTIC EMISSION (ISO 18081:2016)
BS EN ISO/IEC 80079-38 : 2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
I.S. EN ISO 18674-1:2015 GEOTECHNICAL INVESTIGATION AND TESTING - GEOTECHNICAL MONITORING BY FIELD INSTRUMENTATION - PART 1: GENERAL RULES (ISO 18674-1:2015)
BS EN 60079-0 : 2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
EN 50625-2-3:2017 Collection, logistics & treatment requirements for WEEE - Part 2-3: Treatment requirements for temperature exchange equipment and other WEEE containing VFC and/or VHC
BS EN 474-1 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 13175:2014 LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
S.R. CEN/TS 54-32:2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 32: PLANNING, DESIGN, INSTALLATION, COMMISSIONING, USE AND MAINTENANCE OF VOICE ALARM SYSTEMS
CEN/TR 15276-2:2009 Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance
NORSOK I 001 : 2010 FIELD INSTRUMENTATION
BS EN ISO 16924:2018 Natural gas fuelling stations. LNG stations for fuelling vehicles
I.S. EN 50177:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
NF EN 60079-20-1 : 2010 EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
EN 13617-3:2012 Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves
I.S. EN 14591-4:2007 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 15233:2007-11 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
BS EN 1755:2015 Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
UNE-EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNE-EN 12547:2015 Centrifuges - Common safety requirements
I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. EN 13237:2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 1127-1:2011-10 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 13799:2012 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS
I.S. EN 1127-2:2014 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
I.S. EN 12409:2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
I.S. EN 1114-1:2011 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
I.S. EN 12111:2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
DIN EN 13463-1:2009-07 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
I.S. EN 12779:2015 SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
I.S. EN 1422:2014 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
I.S. EN 12547:2014 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
DIN EN 13760:2003-11 Automotive LPG filling system for light and heavy duty vehicles - Nozzle; Test requirements and dimensions
DIN EN 1422:1997-11 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
VDI 2291:2016-06 Emission control - Test criteria for monitoring vapour recovery systems
VDI 3589:2014-02 Selection criteria for procuring industrial trucks
VDI 2260:2003-10 Technical warranty for gas cleaning equipment - Particulate and gaseous matter
BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice
VDI 2710:2010-04 Interdisciplinary design of automated guided vehicle systems (AGVS)
VDI 2263 Blatt 5:2014-10 Dust fires and dust explosions - Hazards, assessment, protective measures - Explosion protection in fluidized bed dryers
VDI 2262 Blatt 3:2011-06 Workplace air - Reduction of exposure to air pollutants - Ventilation technical measures
BS 3790:2006 Specification for belt drives. Endless wedge belts, endless V-belts, banded wedge belts, banded V-belts and their corresponding pulleys
VDI 3677 Blatt 1:2010-11 Filtering separators - Surface filters
VDI 2263 Blatt 5.1:2014-10 Dust fires and dust explosions - Hazards, assessment, protective measures - Explosion protection in fluid bed dryers - Hints and examples of operation
VDI 2262 Blatt 1:2013-06 Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection
VDI 2592 Blatt 1:2010-12 Emission control - Oilmills for the production of oil and wholemeal in prepress and extraction facilities
BS 10999:2010 Specification for distress signal units for the fire and rescue service
10/30219402 DC : 0 BS EN 13012 - PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
PD CEN/TR 15339-4:2014 Thermal spraying. Safety requirements for thermal spraying equipment Gas and liquid fuel supply
BS EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
05/30134146 DC : DRAFT MAY 2005 EN 14591-4 - EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
I.S. EN 13463-1:2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
13/30257895 DC : 0 BS EN 1755 - SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
PD CEN/CLC/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
BS EN ISO 18674-1:2015 Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation General rules
PD CEN/TR 16061:2010 Gas meters. Smart gas meters
NF EN 50177 : 2009 AMD 1 2013 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDER - SAFETY REQUIREMENTS
13/30271407 DC : DRAFT DEC 2013 BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
BS EN 60079-31:2014 Explosive atmospheres Equipment dust ignition protection by enclosure \'t\'
PREN 13617-1 : DRAFT 2010 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
12/30258581 DC : 0 BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
BS PD CEN/TR 16832 : 2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
09/30209992 DC : 0 BS EN 16020 - EXPLOSION DIVERTERS
BS 8576:2013 Guidance on investigations for ground gas. Permanent gases and Volatile Organic Compounds (VOCs)
I.S. EN 50574:2012 COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR END-OF-LIFE HOUSEHOLD APPLIANCES CONTAINING VOLATILE FLUOROCARBONS OR VOLATILE HYDROCARBONS
15/30312749 DC : 0 BS EN 16808 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SAFETY OF MACHINERIES - MANUAL ELEVATORS
BS EN 61241-4:2006 Electrical apparatus for use in the presence of combustible dust Type of protection \'pD\'
10/30219405 DC : 0 BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
13/30286135 DC : 0 BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
BS EN 1010-2 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
TR 103 065 : 1.1.1 AERONAUTICAL COMMUNICATIONS; CLASSIFICATION OF RF-PARAMETERS OF GROUND-BASED AIR TRAFFIC MANAGEMENT-RELATED RADIO EQUIPMENT AS BEING GOVERNED BY R&TTE DIRECTIVE OR SINGLE EUROPEAN SKY (SES) INTEROPERABILITY REGULATION
14/30281804 DC : 0 BS 8608 - SPECIFICATION FOR RADIO TELEMETRY SYSTEMS FOR THE FIRE AND RESCUESERVICE
NF EN 50495 : 2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
05/30127970 DC : DRAFT JAN 2005 EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
BS EN 15714-2:2009 Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements
UNE-EN 50176:2010 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
PD CEN/TR 15473:2007 Characterization of sludges. Good practice for sludges drying
14/30294092 DC : 0 BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
12/30262929 DC : 0 BS EN 15339-1 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 1: GENERAL REQUIREMENTS
EN ISO 11135:2014 Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014)
BS ISO 21789:2009 Gas turbine applications — Safety
PD 8010-1:2004 Code of practice for pipelines Steel pipelines on land
05/30131803 DC : DRAFT APR 2005 EN 15198 - METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
BS EN 14973:2015 Conveyor belts for use in underground installations. Electrical and flammability safety requirements
NORSOK D-002 : 2013 WELL INTERVENTION EQUIPMENT
PREN 13617-3 : DRAFT 2010 PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES
PREN 12779 : DRAFT 2014 SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
S.R. CEN/TR 15339-5:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 5: POWDER AND WIRE FEED UNITS
I.S. EN 50495:2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
BS EN 60079-29-4:2010 Explosive atmospheres Gas detectors. Performance requirements of open path detectors for flammable gases
NF EN 60079-25 : 2011 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
TR 102 532 : 1.2.1 ENVIRONMENTAL ENGINEERING (EE); THE USE OF ALTERNATIVE ENERGY SOLUTIONS IN TELECOMMUNICATION INSTALLATIONS
DEFSTAN 66-31(PT4)/2(2008) : 2008 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 4: CONTRACTOR REQUIREMENTS - NAVAL USE APPLICATION
AAMI ISO 11135-1 : 2007 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
I.S. EN 474-1:2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
CEN/CLC/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
CEN/TS 54-32:2015 Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems
BS EN 60079-15:2010 Explosive atmospheres Equipment protection by type of protection \'n\'
NF EN 50271 : 2010 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES
EI 1592 : 2017 DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC BULK WATER DETECTORS FOR USE IN AVIATION FUELLING
EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
EEMUA 186 : 2016 A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 858-2:2003-10 SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 2: SELECTION OF NOMINAL SIZE, INSTALLATION, OPERATION AND MAINTENANCE
DIN EN 1127-2:2014-09 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
DIN EN 12547:2014-12 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
DIN EN 12779:2016-03 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
BS EN 13617-4:2012 Petrol filling stations Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
BS EN 14591-2:2007 Explosion prevention and protection in underground mines. Protective systems Passive water trough barriers
BS EN 14756:2006 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
BS EN 1010-1 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
BS EN 858-2:2003 Separator systems for light liquids (e.g. oil and petrol) Selection of nominal size, installation, operation and maintenance
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
EEMUA 177 : 2000 GUIDE TO THE UK PRESSURE SYSTEM SAFETY REGULATIONS (2000)
EEMUA 178 : 2009 ELECTRICAL SAFETY OF INSTRUMENTS, INSTRUMENT CONTROL PANELS AND CONTROL SYSTEMS - DESIGN GUIDE
EEMUA 181 : 1995 GUIDE TO RISK BASED ASSESSMENTS OF IN-SITU LARGE EX 'E' AND EX 'N' MACHINES
EN 13763-26 : 2004 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 26: DEFINITIONS, METHODS AND REQUIREMENTS FOR DEVICES AND ACCESSORIES FOR RELIABLE AND SAFE FUNCTION OF DETONATORS AND RELAYS
EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
EN 13821:2002 Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures
EN 50281-1-2 : 98 AMD 1 2002 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-2: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - SELECTION, INSTALLATION AND MAINTENANCE
UNI EN 13799 : 2012 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS
UNI EN 1114-1 : 2011 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
UNI EN 13463-1 : 2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
UNI EN 12547 : 2014 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
UNI EN 14591-1 : 2005 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 1: 2-BAR EXPLOSION PROOF VENTILATION STRUCTURE
UNI EN 14591-4 : 2008 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
UNI EN 12409 : 2011 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
UNI EN 1127-2 : 2014 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
UNI EN 12111 : 2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
UNI EN 1422 : 2014 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
UNI EN 1710 : 2008 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNI EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
EN 50281-1-1 : 98 AMD 1 2002 ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING
DIN 28000-2:2011-01 Chemical apparatus - Documentation in the life cycle of process plants - Part 2: Contents of documentation
BS EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
11/30254129 DC : 0 BS EN 12547 - CENTRIFUGES - COMMON SAFETY REQUIREMENTS
00/541591 DC : DRAFT DEC 2000 BS EN 13463-2 - NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 2: PROTECTION BY FLOW RESTRICTING ENCLOSURE "FR"
BS EN ISO 18081:2016 Non-destructive testing. Acoustic emission testing (AT). Leak detection by means of acoustic emission
12/30262932 DC : 0 BS EN 15339-3 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 3: TORCHES FOR THERMAL SPRAYING AND THEIR CONNECTION AND SUPPLY UNITS
BS EN 16447:2014 Explosion isolation flap valves
CEN/TR 15339-3:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units
10/30233949 DC : 0 BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
IEC TR 61831:2011 On-line analyser systems - Guide to design and installation
EN 15714-2:2009 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
PREN 14678-1 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
BS EN 14677:2008 Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
PREN 1839 : DRAFT 2014 DETERMINATION OF EXPLOSION LIMITS OF GASES AND VAPOURS AND DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION (LOC) FOR FLAMMABLE GASES AND VAPOURS
ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
14/30300117 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
BS 5908-1:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises
ISO/TS 20474-14:2008 Earth-moving machinery Safety Part 14: Information on national and regional provisions
ISO 21789:2009 Gas turbine applications — Safety
UNI EN 15714-2 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
I.S. 328:2015 GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4)
10/30219408 DC : 0 BS EN 13617-2 - PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
CEN/TR 16832 : 2015 COR 2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
PREN 1755 : DRAFT 2013 SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
10/30219411 DC : 0 BS EN 13617-3 - PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES
98/541503 DC : DRAFT MAY 1998 PREN 13237-1 - POTENTIALLY EXPLOSIVE ATMOSPHERE - EXPLOSION PREVENTION AND PROTECTION - PART 1: TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
BS EN 60079-20-1:2010 Explosive atmospheres Material characteristics for gas and vapour classification. Test methods and data
ISO 16924:2016 Natural gas fuelling stations — LNG stations for fuelling vehicles
UNI CEN/TR 15276-2 : 2009 FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 2: DESIGN, INSTALLATION AND MAINTENANCE
UNI EN 1127-1 : 2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
SAE AS 6479 : 2014 SPLICER, FUSION, FIBER OPTIC, AEROSPACE
BS EN ISO 11135:2014 Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices
PREN 13617-2 : DRAFT 2010 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
EEMUA 209 : 2015 GUIDE TO THE DEVELOPMENT AND IMPLEMENTATION OF ON-LINE ANALYSER APPLICATIONS
BS EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
NF EN 50104 : 2010 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF OXYGEN - PERFORMANCE REQUIREMENTS AND TEST METHODS
BS EN 50177 : 2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
S.R. CEN/CLC/TR 16832:2015&LC:2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
S.R. CEN TR 15276-2:2009 FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 2: DESIGN, INSTALLATION AND MAINTENANCE
I.S. EN ISO/IEC 80079-38:2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
PREN 12547 : DRAFT 2011 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
17/30365866 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
BS EN 50050:2006 Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
DIN EN 474-1:2014-03 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
S.R. CEN/TR 15339-3:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 3: TORCHES FOR THERMAL SPRAYING AND THEIR CONNECTION AND SUPPLY UNITS
PREN 50625-2-3 : DRAFT 2017 COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 2-3: TREATMENT REQUIREMENTS FOR TEMPERATURE EXCHANGE EQUIPMENT AND OTHER WEEE CONTAINING VFC AND/OR VHC
S.R. CEN/TR 15339-6:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 6: SPRAY BOOTH, HANDLING SYSTEM, DUST COLLECTION, EXHAUST SYSTEM, FILTER
EN 13617-2:2012 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
DIN EN 1710:2008-08 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
DIN EN 1114-1:2012-01 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
DIN EN 13799:2012-06 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\'
BS EN 12547:2014 Centrifuges. Common safety requirements
BS EN 14034-4 : 2004 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS
BS EN 1114-1:2011 Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders
BS EN 13463-6:2005 Non-electrical equipment for potentially explosive atmospheres Protection by control of ignition source \'b\'
BS EN 13821:2002 Potentially explosive atmospheres. Explosion prevention and protection. Determination of minimum ignition energy of dust/air mixtures
ISO/IEC 80079-34:2011 Explosive atmospheres Part 34: Application of quality systems for equipment manufacture
BS EN 13617-1:2012 Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 13673-2:2005 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours Determination of the maximum rate of explosion pressure rise
BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNE-EN 60079-0:2013 Explosive atmospheres - Part 0: Equipment - General requirements
BS EN 12779:2015 Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements
BS EN 15339-2:2007 Thermal spraying. Safety requirements for thermal spraying equipment Gas control units
BS EN 13799:2012 LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 60079-35-1:2011 Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
EN ISO/IEC 80079-34:2011 Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011)
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
BS EN 13237:2012 Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
BS EN 1127-2:2014 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining
BS EN 14492-1 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
BS EN 13463-8:2003 Non-electrical equipment for potentially explosive atmospheres Protection by liquid immersion \'k\'
UNE-EN 12409:2009 Plastics and rubber machines - Thermoforming machines - Safety requirements
ISO 18081:2016 Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission
BS EN 1710 : 2005 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNE-EN 13463-1:2011 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
UNE-EN 1114-1:2012 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
EN 61241-18:2004 Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation "mD"
EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
EN ISO 18081:2016 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016)
EN 858-2:2003 Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance
EN ISO 11135-1:2007 Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007)
EN 14034-2:2006+A1:2011 Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds
EN 1755:2015 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
EN 14797:2006 Explosion venting devices
EI 1598 : 2012 DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL
EN 15268:2008 Petrol filling stations - Safety requirements for the construction of submersible pump assemblies
EN 13980:2002 Potentially explosive atmospheres - Application of quality systems
EN 16009:2011 Flameless explosion venting devices
EN 13673-2:2005 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise
EN ISO 18674-1:2015 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1: General rules (ISO 18674-1:2015)
EN 12581:2005+A1:2010 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
EN 14983:2007 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements
EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
EN 14681:2006+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
EN 1422:2014 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods
EN 14973:2015 Conveyor belts for use in underground installations - Electrical and flammability safety requirements
EN 16447:2014 Explosion isolation flap valves
EN 14994:2007 Gas explosion venting protective systems
EN 13673-1:2003 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure
BS 6704:1996 Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines
EN 14034-3:2006+A1:2011 Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds
EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds
EN 14034-1:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds
EN 14756:2006 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
EN 15794:2009 Determination of explosion points of flammable liquids
STANAG 2233 : 2010 NATO CONSIGNMENT AND ASSET TRACKING BY RADIO-FREQUENCY IDENTIFICATION
PREN 13617-4 : DRAFT 2010 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
I.S. EN 13821:2002 POTENTIALLY EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - DETERMINATION OF MINIMUM IGNITION ENERGY OF DUST/AIR MIXTURES
EI TP PETROLEUM ROAD TANKER : 2010 PETROLEUM ROAD TANKER DESIGN AND CONSTRUCTION
PD ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
PREN ISO 11135 : DRAFT 2011 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO/DIS 11135:2011)
PD CEN/TR 15339-5:2014 Thermal spraying. Safety requirements for thermal spraying equipment Powder and wire feed units
UNE-EN 50177:2010 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements
BS EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 60079-25:2010 Explosive atmospheres Intrinsically safe electrical systems
09/30190323 DC : 0 BS EN 14491 - DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
PD IEC/TR 61831:2011 On-line analyser systems. Guide to design and installation
09/30194709 DC : 0 BS 10999 - SPECIFICATION FOR DISTRESS SIGNAL UNITS FOR THE FIRE AND RESCUE SERVICE
12/30243465 DC : 0 BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
DIN EN ISO 18674-1:2015-09 GEOTECHNICAL INVESTIGATION AND TESTING - GEOTECHNICAL MONITORING BY FIELD INSTRUMENTATION - PART 1: GENERAL RULES (ISO 18674-1:2015)
14/30292850 DC : 0 BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
NF EN ISO/IEC 80079-34 : 2011 EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
09/30182299 DC : 0 BS EN 1010-2:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
BS EN 16009:2011 Flameless explosion venting devices
I.S. EN 50625-2-3:2017 COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 2-3: TREATMENT REQUIREMENTS FOR TEMPERATURE EXCHANGE EQUIPMENT AND OTHER WEEE CONTAINING VFC AND/OR VHC
04/30115500 DC : DRAFT JUN 2004 EN 14983 - EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - EQUIPMENT AND PROTECTIVE SYSTEMS FOR FIREDAMP DRAINAGE
13/30265319 DC : 0 BS EN 14973 - CONVEYOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS
04/30113213 DC : 0 EN 14591-3 - EXPLOSION PROTECTION IN UNDERGROUND MINING - PROTECTIVE SYSTEMS - PART 3: WATER TROUGHS FOR EXPLOSION BARRIERS
DEFSTAN 66-31(PT5)/1(2007) : 2007 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 5: CONTRACTOR REQUIREMENTS - LAND USE APPLICATION
EN 12079-1 : 2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING
CEN/TR 15339-1:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements
BS EN 14591-4:2007 Explosion prevention and protection in underground mines. Protective systems Automatic extinguishing systems for road headers
UNE-EN 15714-2:2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
S.R. CEN/TR 15339-1:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 1: GENERAL REQUIREMENTS
DIN EN 15714-2:2010-02 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
CEN/TR 16061:2010 Gas meters - Smart Gas Meters
PREN 1127-2 : DRAFT 2012 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
I.S. EN 1127-1:2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
NF EN 60079-29-4 : 2010 EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES
NF EN 60079-35-1 : 2011 EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
S.R. CEN/TR 16793:2016 GUIDE FOR THE SELECTION, APPLICATION AND USE OF FLAME ARRESTERS
DIN EN 13175:2015-02 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
ISO 11135:2014 Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices
DIN EN 14591-2:2007-07 Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers
DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
DIN EN 13237:2013-01 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 14591-1:2004-12 Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar-explosion proof ventilation structure
BS EN 1422:2014 Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods
BS EN 12079-1:2006 Offshore containers and associated lifting sets Offshore containers. Design, manufacture and marking
BS EN 13673-1:2003 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours Determination of the maximum explosion pressure
UNE-EN 12779:2016 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
BS EN 12581 : 2005 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 14591-1:2004 Explosion prevention and protection in underground mines. Protective systems 2-bar explosion proof ventilation structure
BS EN ISO 11135-1:2007 Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices
BS EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
BS EN 14034-3 : 2006 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS
BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
ISO 18674-1:2015 Geotechnical investigation and testing Geotechnical monitoring by field instrumentation Part 1: General rules
BS EN 1953:2013 Atomising and spraying equipment for coating materials. Safety requirements
BS EN 14034-2 : 2006 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS
BS EN 12874:2001 Flame arresters. Performance requirements, test methods and limits for use
BS EN 13617-2:2012 Petrol filling stations Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
BS EN 14681 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
BS EN 14492-2 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 1127-2:2014 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
CEN/TR 15473:2007 Characterization of sludges - Good practice for sludges drying
EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 12874 : 2001 FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE
EN 50574-1:2012/AC:2014 COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR END-OF-LIFE HOUSEHOLD APPLIANCES CONTAINING VOLATILE FLUOROCARBONS OR VOLATILE HYDROCARBONS
EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
EN 60079-35-1:2011/AC:2011 EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
EN 61241-4:2006 Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD"
EN 12111:2014 Tunnelling machines - Road headers and continuous miners - Safety requirements
EN 50574:2012/AC:2014 COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR END-OF-LIFE HOUSEHOLD APPLIANCES CONTAINING VOLATILE FLUOROCARBONS OR VOLATILE HYDROCARBONS
EN 60079-20-1:2010 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
DIN EN 14983:2007-06 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
PIP ELSMT01G : 2013 IEC AC SQUIRREL CAGE INDUCTION MOTOR SPECIFICATION (1000 VOLTS AND BELOW)

Free

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.