DIN EN 14399-9:2016-01 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
Hardcopy , PDF
07-03-2021
German
01-01-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Direkte Kraftanzeiger
3.1 Masse
3.2 Technische Lieferbedingungen und Bezugsnormen
3.3 Leistungsprüfung der direkten Kraftanzeiger
3.4 Prüfverfahren für die Messung der Druckbelastung
(alle Oberflächenausführungen) von direkten
Kraftanzeigern
3.4.1 Allgemeines
3.4.2 Prüfeinrichtung
3.4.3 Druckbelastungssystem
3.4.4 Auflageblöcke
3.4.5 Lagerblöcke
3.4.6 Kalibrierung
3.4.7 Durchführung der Prüfung
3.5 Kennzeichnung des direkten Kraftanzeigers
3.6 Bezeichnung des direkten Kraftanzeigers
4 Mutterseitige und schraubenkopfseitige Scheiben
4.1 Masse
4.2 Technische Lieferbedingungen und Bezugsnormen
für mutterseitige und schraubenkopfseitige Scheiben
4.3 Kennzeichnung
4.3.1 Mutterseitige Scheiben
4.3.2 Schraubenkopfseitige Scheiben
4.4 Bezeichnung
4.4.1 Mutterseitige Scheiben
4.4.2 Schraubenkopfseitige Scheiben
5 Gebrauchseigenschaften
5.1 Garnituren
5.2 Gebrauchseigenschaften der direkten Kraftanzeiger
in der Garnitur
5.3 Gebrauchseigenschaften der Garnitur aus
Schraube, Mutter, Scheibe(n) und direktem
Kraftanzeiger
5.3.1 Allgemeines
5.3.2 Durchführung der Prüfung
Anhang A (informativ) Besondere Prüfbedingungen
und -abläufe
Literaturhinweise
Bilder
Tabellen
Defines, together with EN 14399-1, the requirements for assemblies of high-strength structural bolts and nuts, with large width across flats, of system HR or HV, including the requirements for the general dimensions, tolerances, materials and performance for two grades, H[8] and H[10], of compressible washer-type direct tension indicators, nut face washers and bolt face washers suitable for preloaded joints.
| DevelopmentNote |
Applies in conjunction with DIN EN 14399-1 issue 06-2006. (07/2009) DRAFT 2016 issued in January 2016. (01/2016)
|
| DocumentType |
Draft
|
| Pages |
58
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| EN 14399-9:2018 | Identical |
| KTA 3401.2 : 2016(R2017) | STEEL CONTAINMENT VESSELS - PART 2: ANALYSIS AND DESIGN |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 14399-8:2007 | High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 14399-3:2015 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
| ISO 4759-3:2016 | Tolerances for fasteners Part 3: Washers for bolts, screws and nuts Product grades A, C and F |
| DIN ISO 2859-1:2014-08 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION (ISO 2859-1:1999 + COR. 1:2001 + AMD.1:2011) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| EN ISO 4759-3:2016 | Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
| EN 13811:2003 | Sherardizing - Zinc diffusion coatings on ferrous products - Specification |
| EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| EN 14399-6:2015 | High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers |
| EN 14399-1:2015 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 14399-4:2015 | High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| EN 14399-7:2007 | High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies |
| EN 14399-5:2015 | High-strength structural bolting assemblies for preloading - Part 5: Plain washers |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| EN 14399-2:2015 | High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.