DIN EN 14677:2008-11
Current
The latest, up-to-date edition.
SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
Hardcopy , PDF
English
01-01-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe und Definitionen
4 Liste der signifikanten Gefährdungen
5 Sicherheitsanforderungen und/oder -massnahmen
5.1 Allgemeine Konstruktionsanforderungen
5.1.1 Allgemein
5.1.2 Vorort-Inspektion
5.1.3 Angeschlossene Ausrü stungen
5.1.4 Sicherheitslageplan
5.1.5 Zugang
5.1.6 Sicherheitssteuerungssystem
5.1.7 Elektrische Energieversorgung
5.1.8 Elektrische Niederspannungsversorgung
5.1.9 Flüssigkeitssysteme, die Flüssigkeiten
transportieren oder beinhalten
5.1.10 Hydraulik, Pneumatik, Gas-, Kühlungs- und
Schmierstoffsysteme
5.1.11 Ergonomische Grundsätze
5.1.12 Gesundheitsgefährdende Bereiche
5.1.13 Persönliche Schutzausrüstung
5.1.14 Warneinrichtungen und Sicherheitszeichen
5.1.15 Bedienerpositionen
5.1.16 Lokaler Schaltkasten
5.1.17 Energieverlust
5.1.18 Medienanschluss und -ableitung
5.1.19 Austausch von Lanzen
5.1.20 Oberflächentemperaturen, Hitzestrahlung
5.1.21 Flüssigkeiten zur Ableitung in Rinnen
5.1.22 Elektrodenklemme
5.1.23 Erdung von mechanischen Pfannenofenteilen
5.1.24 Not-Aus
5.1.25 Feuerschutz
5.2 Liste der signifikanten Gefährdungen,
Gefährdungssituationen, Sicherheitsanforderungen
und/oder -massnahmen
5.2.1 Allgemein
5.2.2 Materialzugabeausrüstung
5.2.3 Blasausrüstung
5.2.4 Positionierung der Ausrüstung
5.2.5 Rührausrüstung
5.2.6 Vakuumpumpen/Ventilationsausrüstung
5.2.7 Vakuumgefässausrüstung
5.2.8 Ausrüstung für den Umgang mit Medien
5.2.9 Abschlackanlagen
5.2.10 Elektrische Heizeinrichtungen
5.2.11 Temperatur- und Probeentnahmeausrüstung
5.3 Spezielle Anforderungen zur Vorbeugung und Schutz
vor Explosion
5.4 Geräuschminderung als Sicherheitsanforderung
5.4.1 Geräuschquellen
5.4.2 Geräuschminderung an der Quelle durch
Konstruktion
5.4.3 Geräuschminderung durch Schutzmassnahmen
5.4.4 Geräuschminderung durch Information
6 Verifizierung der Sicherheitsanforderungen und/oder
Massnahmen
7 Benutzerinformation
7.1 Schilder und Warneinrichtungen
7.2 Beigefügte Dokumente
7.2.1 Betriebsanleitung
7.2.2 Angaben zu Maschinen/Ausrüstungen
7.2.3 Anweisung für Transport und Montage
7.2.4 Informationen über Inbetriebnahme und Demontage
der Ausrüstung
7.2.5 Betriebsanleitung die Ausrüstung betreffend
7.2.6 Wartungshandbuch
7.3 Mindestkennzeichnung
7.4 Schulung von Mitarbeitern
Anhang A (normativ) Geräuschmessung
A.1 Einleitung
A.2 Bestimmung des A-bewerteten Schallleistungspegels
A.3 Bestimmung der A-bewerteten Emissions-Schalldruckpegel
A.3.1 Bestimmung des Emissions-Schalldruckpegels
an ausgewiesenen Messpunkten
A.3.2 Bestimmung des Emissions-Schalldruckpegels
an Arbeitsplätzen
A.4 Messungenauigk
A.5 Betriebsbedingungen
A.6 Aufzubewahrende und berichtpflichtige Angaben
A.7 Angabe und Verifizierung von Geräuschemissionswerten
A.8 Beispiele für Arbeitsplätze am RH-Prozess mit
Pfannenofen
Anhang B (informativ) Beispiele für Ausrüstung der
Sekundärmetallurgie
Anhang C (informativ) Beispiele sekundärmetallurgischer
Prozesse
Anhang ZA (informativ) Beziehung zwischen dieser Europäischen
Norm und den grundlegenden Anforderungen der
EG-Richtlinie 98/37/EG
Anhang ZB (informativ) Beziehung zwischen dieser Europäischen
Norm und den grundlegenden Anforderungen der
EG-Richtlinie 2006/42/EG
Anhang ZC (informativ) Beziehung zwischen dieser Europäischen
Norm und den grundlegenden Anforderungen der
EG-Richtlinie 94/9/EG
Literaturhinweise
Bilder
Tabellen
Describes the general safety requirements for secondary steelmaking machinery and equipment (SSE).
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN 14677:2008 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| ISO 11200:2014 | Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 620:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| PREN 15004-1 : DRAFT 2016 | FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE (ISO 14520-1:2015, MODIFIED) |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| ISO 11546-2:1995 | Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes) |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 12094-1:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
| DIN V 19247-1:2003-08 | CONTROL TECHNOLOGY - DEVICES FOR OXYGEN SERVICE IN THE PROCESS-TECHNIQUE - PART 1: INSTRUMENTATION - GENERAL REQUIREMENTS AND TESTINGS |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
| EN ISO 11820:1996 | Acoustics - Measurements on silencers in situ (ISO 11820:1996) |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| EN ISO 11200:2014 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 11820:1996 | Acoustics — Measurements on silencers in situ |
| EN ISO 11546-2:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN ISO 3747:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 60519-4:2013 | SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS (IEC 60519-4:2013) |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| EN ISO 3740:2000 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000) |
| EN 60079-10:2003 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
| ISO 14520-1:2015 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 11064-1:2000 | Ergonomic design of control centres Part 1: Principles for the design of control centres |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| ISO 11546-1:1995 | Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes) |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 50171 : 2001 COR 2001 | CENTRAL POWER SUPPLY SYSTEMS |
| EN ISO 11064-1:2000 | Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000) |
| EN ISO 11691:2009 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
| EN ISO 11821:1997 | Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997) |
| EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| EN ISO 11546-1:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| EN 61241-10:2004 | Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| ISO 11691:1995 | Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method |
| IEC 60519-4:2013 | Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations |
| ISO 11821:1997 | Acoustics — Measurement of the in situ sound attenuation of a removable screen |
| IEC 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
| IEC 61241-10:2004 | Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.