DIN EN 16028:2012-10
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
Amended by
Available format(s)
Hardcopy , PDF
Superseded date
26-06-2022
Superseded by
Published date
01-10-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
63
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 16028:2012 | Identical |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| DIN 51811:2013-11 (Draft) | TESTING OF LUBRICANTS - TESTING OF CORROSIVENESS TO COPPER OF GREASES - COPPER STRIP TARNISH TEST |
| ISO 5659-1:1996 | Plastics Smoke generation Part 1: Guidance on optical-density testing |
| DIN 51418-2:2015-03 | X-RAY SPECTROMETRY - X-RAY EMISSION AND X-RAY FLUORESCENCE ANALYSIS (XRF) - PART 2: DEFINITIONS AND BASIC PRINCIPLES FOR MEASUREMENTS, CALIBRATION AND EVALUATION OF RESULTS |
| DIN ISO 3733:2003-02 | PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS - DETERMINATION OF WATER - DISTILLATION METHOD |
| DIN 51777-2:1974-09 | TESTING OF MINERAL OIL HYDROCARBONS AND SOLVENTS; DETERMINATION OF WATER CONTENT ACCORDING TO KARL FISCHER; INDIRECT METHOD |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
| ISO 11007:1997 | Petroleum products and lubricants Determination of rust-prevention characteristics of lubricating greases |
| DIN 51451:2004-09 | TESTING OF PETROLEUM PRODUCTS AND RELATED PRODUCTS - ANALYSIS BY INFRARED SPECTROMETRY - GENERAL WORKING PRINCIPLES |
| ISO 6743-99:2002 | Lubricants, industrial oils and related products (class L) — Classification — Part 99: General |
| DIN 51418-1:2008-08 | X-RAY SPECTROMETRY - X-RAY EMISSION- AND X-RAY FLUORESCENCE ANALYSIS (XRF) - PART 1: DEFINITIONS AND BASIC PRINCIPLES |
| ISO 5659-2:2017 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test |
| ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
| EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
| EN ISO 9408:1999 | Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer (ISO 9408:1999) |
| EN ISO 5659-2:2017 | Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017) |
| DIN 51810-1:2016-09 (Draft) | TESTING OF LUBRICANTS - TESTING RHEOLOGICAL PROPERTIES OF LUBRICATING GREASES - PART 1: DETERMINATION OF SHEAR VISCOSITY BY ROTATIONAL VISCOSIMETER AND THE SYSTEM OF CONE/PLATE |
| DIN 51817:2014-08 | Testing of lubricants - Determination of oil separation from greases under static conditions |
| ISO 2137:2007 | Petroleum products and lubricants Determination of cone penetration of lubricating greases and petrolatum |
| ISO 9408:1999 | Water quality — Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| EN ISO 4589-1:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements (ISO 4589-1:2017) |
| ISO 20623:2003 | Petroleum and related products Determination of the extreme-pressure and anti-wear properties of fluids Four ball method (European conditions) |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| ISO 6743-1:2002 | Lubricants, industrial oils and related products (class L) — Classification — Part 1: Family A (Total loss systems) |
| EN ISO 5659-1:1999 | Plastics - Smoke generation - Part 1: Guidance on optical-density testing (ISO 5659-1:1996) |
| DIN 51398:1983-07 | TESTING OF LUBRICANTS; PROCEDURE FOR MEASUREMENT OF LOW TEMPERATURE APPARENT VISCOSITY BY MEANS OF THE BROOKFIELD VISCOMETER (LIQUID BATH METHOD) |
| ISO/TR 5659-3:1999 | Plastics Smoke generation Part 3: Determination of optical density by a dynamic-flow method |
| DIN 51820-1:1989-02 | TESTING OF LUBRICANTS; ANALYSIS OF GREASES BY INFRARED SPECTROMETRY; TAKING & EVALUATING AN INFRARED SPECTRUM |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| DIN 51805:1974-08 | TESTING OF LUBRICANTS; DETERMINATION OF FLOW PRESSURE OF LUBRICATING GREASES, KESTERNICH METHOD |
| ISO 7827:2010 | Water quality Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium Method by analysis of dissolved organic carbon (DOC) |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ISO 9772:2012 | Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| ISO 3146:2000 | Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| DIN ISO 7120:2000-05 | Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the presence of water (ISO 7120:1987) |
| EN ISO 7827:2012 | Water quality - Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:2010) |
| DIN ISO 2176:1997-05 | PETROLEUM PRODUCTS - LUBRICATING GREASE - DETERMINATION OF DROPPING POINT |
| EN ISO 10707:1997 | Water quality - Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds - Method by analysis of biochemical oxygen demand (closed bottle test) (ISO 10707:1994) |
| DIN 51350-5:2015-03 | TESTING OF LUBRICANTS - TESTING IN THE FOUR-BALL TESTER - PART 5: DETERMINATION OF WEARING CHARACTERISTICS FOR CONSISTENT LUBRICANTS |
| EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| EN ISO 9439:2000 | Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test (ISO 9439:1999) |
| DIN ISO 6743-99:2012-12 | Lubricants, industrial oils and related products (class L) - Classification - Part 99: General (ISO 6743-99:2002) |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
| DIN 51350-4:2015-03 | TESTING OF LUBRICANTS - TESTING IN THE FOUR-BALL TESTER - PART 4: DETERMINATION OF WELDING LOAD OF CONSISTENT LUBRICANTS |
| EN ISO 2160:1998 | Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
| DIN ISO 2049:2001-06 | Petroleum products - Determination of colour (ASTM scale) (ISO 2049:1996) |
| EN 15427:2008+A1:2010 | Railway applications - Wheel/rail friction management - Flange lubrication |
| ISO 2176:1995 | Petroleum products — Lubricating grease — Determination of dropping point |
| ISO 4589-1:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.