DIN EN 50173:2000-07
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS
01-06-2003
12-01-2013
Vorwort
Einleitung
1 Anwendungsbereich und Konformität
1.1 Anwendungsbereich
1.2 Konformität
2 Normative Verweisungen
3 Definitionen und Abkürzungen
3.1 Definitionen
3.2 Abkürzungen
4 Struktur des universellen Verkabelungssystems
4.1 Allgemeines
4.2 Struktur
4.3 Strukturübersicht
4.4 Anordnung der Verteiler
4.5 Schnittstellen zum universellen Verkabelungssystem
4.6 Dimensionierung und Konfiguration
4.7 Elektromagnetische Verträglichkeit
4.8 Erdung und Potentialausgleich
5 Realisierung
5.1 Allgemeines
5.2 Tertiärverkabelung
5.3 Primär- und Sekundärverkabelung
6 Festlegungen zur Installationsstrecke und
Übertragungsstrecke
6.1 Installationsstrecken und Übertragungsstrecken
6.2 Klassifizierung- und 150-Q-Kabel
6.3 Symmetrische Installationsstrecken und
Übertragungsstrecken
6.4 Installationsstrecken und Übertragungsstrecken
mit Lichtwellenleit
7 Leistungsanforderungen an Kabel
7.1 Allgemeines
7.2 Symmetrische Kabel
7.3 Weitere Betrachtungen des Nahnebensprechens bei
symmetrischen Kabeln
7.4 Mehrmoden-Lichtwellenleiterkabel
7.5 Einmoden-Lichtwellenleiterkabel
8 Anforderungen an die Verbindungstechnik
8.1 Allgemeine Anforderungen .
8.2 Verbindungstechnik für 100-Omega- und 120-Omega-Verkabelung
8.3 Verbindungstechnik für 150-Omega-Verkabelung
8.4 Verbindungstechnik für Lichtwellenleiter
9 Schirmung
9.1 Allgemeines
9.2 Elektromagnetische Verträglichkeit
9.3 Erdung
10 Systemverwaltung
10.1 Allgemeines
10.2 Aufgabenbereich der Systemverwaltung
10.3 Kennzeichnung
10.4 Aufzeichnungen und Dokumentation
Anhang A (informativ) Prüfverfahren zur Leistungsfähigkeit
der Verkabelungsstrecke
A.1 Allgemeines
A.2 Prüfen symmetrischer Verkabelungsstrecken
A.3 Prüfen von Lichtwellenleiter-Verkabelungsstrecken
A.4 Prüfung von Verkabelungsstrecken
Anhang B (normativ) Prüfung der Verbindungstechnik für
symmetrische Verkabelung
B.1 Prüfung der Übertragungsparameter an Steckverbindern
für Verkabelung mit symmetrischen kabeln
B.2 Überprüfung des Prüfaufbaus und Anschlussverfahren
zur Prüfung modularer Stecker und Buchsen
B.3 Zuverlässigkeitsprüfung von Verbindungstechnik für
symmetrische Verkabelung
Anhang C (normativ) Anforderungen an flexible symmetrische
100-Omega-, 120-Omega- und 150-Omega-Kabel
Anhang D (informativ) Topologie
D.1 Gebräuchliche Topologien
D.2 Konfigurationen
D.3 Anwendung des strukturierten Konzeptes
Anhang E (informativ) Erläuterungen zur Leistungsfähigkeit
von Verkabelungsstrecken
E.1 Übertragung auf symmetrischen Kabeln
E.2 Lichtwellenleiter-Verkabelung
Anhang F (informativ) Unterstützte Netzanwendungen
Anhang G (informativ) Leitfaden für die Planung von Verbindungen
mit Lichtwellenielter-Kabeln
G.1 Einführung
G.2 Allgemeine Hinweise
G.3 Verbindungsvarianten am informationstechnischen Anschluss
G.4 Verbindungsvarianten an Verteilern
Anhang H (informativ) Literaturhinweise
Specifies generic cabling for use within commercial premises that may comprise single or multiple buildings on a campus. Covers balances copper cabling and optical fibre cabling. Specifies the structure and minimum configuration for generic cabling; implementation requirements; conformance requirements and verification procedures; performance requirements for individual cabling links.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| I.S. EN 50173:1997 | Identical |
| NBN EN 50173 : 96 AMD 1 2000 | Identical |
| NS EN 50173 : 95 AMD 1 2000 | Identical |
| NF EN 50173 : 97 AMD 1 2000 | Identical |
| NEN EN 50173 : 95 C1 2000 | Identical |
| BS EN 50173:1996 | Identical |
| SN EN 50173 : 1995 AMD 1 2000 | Identical |
| EN 50173 : 95 AMD 1 2000 | Identical |
| DIN EN 50098-2:1996-06 | CUSTOMER PREMISES CABLING FOR INFORMATION TECHNOLOGY - PART 2: 2048 KBIT/S ISDN PRIMARY ACCESSES AND LEASED LINE NETWORK INTERFACE |
| IEC 60874-10:1992 | Connectors for optical fibres and cables - Part 10: Sectional specification - Fibre optic connector type BFOC/2,5 |
| EN 50081-1:1992 | Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry |
| DIN V ENV 61000-2-2 : 1994 | ELECTROMAGNETIC COMPATIBILITY (EMC) ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS |
| DIN EN 60068-2-2 : 1995 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
| DIN EN 60794-3 : 2015 | OPTICAL FIBRE CABLES - PART 3: OUTDOOR CABLES - SECTIONAL SPECIFICATION (IEC 60794-3:2014) |
| DIN EN 60825-2 : 2011 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| EN 60068-2-60:2015 | Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test |
| DIN EN 188201 : 1996 | FAMILY SPECIFICATION: A1A GRADED INDEX MULTIMODE OPTICAL FIBRES |
| EN 55024 : 2010 AMD 1 2015 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 24:2010/A1:2015) |
| DIN EN 188101 : 1996 | FAMILY SPECIFICATION: SINGLE-MODE DISPERSION UNSHIFTED (B1.1) OPTICAL FIBRE |
| ENV 61000-2-2 : 1993 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS |
| EN 50174-1:2009/A2:2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
| DIN EN 50081-1 : 1993 | ELECTROMAGNETIC COMPATIBILITY (EMC) - GENERIC EMISSION STANDARD - PART 1: RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY |
| EN 61935-1:2009 | SPECIFICATION FOR THE TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 1: INSTALLED BALANCED CABLING AS SPECIFIED IN THE STANDARDS SERIES EN 50173 |
| IEC 60189-1:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
| DIN IEC 60512-2 : 1994 AMD 1 1995 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS; PART 2: GENERAL EXAMINATION, ELECTRICAL CONTINUITY AND CONTACT RESISTANCE TESTS, INSULATION TESTS AND VOLTAGE STRESS TESTS |
| ISO/IEC TR 12075:1994 | Information technology — Customer premises cabling — Planning and installation guide to support ISO/IEC 8802-5 token ring stations |
| IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 50289-1-6:2002 | Communication cables - Specifications for test methods - Part 1-6: Electrical test methods - Electromagnetic performance |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 60794-3:2015 | Optical fibre cables - Part 3: Sectional specification - Outdoor cables |
| ISO/IEC 8802-3:2000 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
| HD 608 : 200S1 | GENERIC SPECIFICATION FOR SYMMETRIC PAIR/QUAD AND MULTICORE CABLES FOR DIGITAL COMMUNICATION |
| EN 60874-19:1997 | Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex) |
| DIN 66379-1:1994-06 (Draft) | INFORMATION PROCESSING SYSTEMS; HIGH PERFORMANCE PARALLEL INTERFACE; MECHANICAL, ELECTRICAL AND SIGNALLING PROTOCOL SPECIFICATION (HIPPI-PH) |
| EN 187000 : 92 AMD 1 95 | GENERIC SPECIFICATION: OPTICAL FIBRE CABLES |
| DIN EN 60068-2-14 : 2010 | ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE |
| DIN EN 60811-1-1 : 2002 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1-1: GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TEST FOR DETERMINING THE MECHANICAL PROPERTIES |
| EN 188000 : 1992 | GENERIC SPECIFICATION FOR OPTICAL FIBRES |
| DIN VDE 0100-540 : 2012-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS (IEC 60364-5-54:2011) |
| EN 50289-1-9:2017 | Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL) |
| DIN EN 187101 : 1996 | FAMILY SPECIFICATION: OPTICAL TELECOMMUNICATION CABLES TO BE USED IN DUCTS OR DIRECT BURIED APPLICATION |
| EN 50098-1 : 98 COR 1 2003 | CUSTOMER PREMISES CABLING FOR INFORMATION TECHNOLOGY - PART 1: ISDN BASIC ACCESS |
| EN 187000 : 92 AMD 1 95 | GENERIC SPECIFICATION: OPTICAL FIBRE CABLES |
| DIN EN 60068-1 : 2015 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013) |
| DIN EN 60068-2-60 : 2016 | ENVIRONMENTAL TESTING - PART 2-60: TESTS - TEST KE: FLOWING MIXED GAS CORROSION TEST (IEC 60068-2-60:2015) |
| DIN EN 50169 : 1995 | SECTIONAL SPECIFICATION FOR BACKBONE CABLES, RISER AND CAMPUS, WITH A COMMON OVERALL SCREEN FOR USE IN DIGITAL COMMUNICATION |
| EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| DIN EN 50168 : 1995 | SECTIONAL SPECIFICATION FOR WORK AREA WIRING CABLES WITH A COMMON OVERALL SCREEN FOR USE IN DIGITAL COMMUNICATION |
| ISO/IEC 11518-1:1995 | Information technology — High-Performance Parallel Interface — Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH) |
| DIN EN 60603-7 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008 + A1:2011) |
| DIN EN 55024 : 2016 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 24:2010 + COR.:2011 + A1:2015) |
| DIN EN 50082-1 : 1997 | ELECTROMAGNETIC COMPATIBILITY (EMC) - GENERIC IMMUNITY STANDARD - PART 1: RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY |
| DIN EN 188202 : 1996 | FAMILY SPECIFICATION: A1B GRADED INDEX MULTIMODE OPTICAL FIBRES |
| ISO/IEC 9314-9:2000 | Information technology Fibre Distributed Data Interface (FDDI) Part 9: Low-cost fibre physical layer medium dependent (LCF-PMD) |
| IEC 61073-1:2009 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
| EN 60603-7:2009/A1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008/A1:2011) |
| EN ISO/IEC 9314-3 : 1995 | INFORMATION PROCESSING SYSTEMS - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - PART 3: PHYSICAL LAYER MEDIUM DEPENDENT (PMD) |
| EN 188201:1995 | Family Specification: A1a graded index multimode optical fibres |
| DIN EN 55022 : 2011 COR 1 2016 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008, MODIFIED) |
| DIN VDE 0819-1 : 1994 | GENERIC SPECIFICATION FOR SYMMETRIC PAIR/QUAD AND MULTI-CORE CABLES FOR DIGITAL COMMUNICATION |
| HD 384.5.54 : 200S1 | ELECTRICAL INSTALLATION OF BUILDINGS - SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
| EN 50098-2:1996 | Customer premises cabling for Information Technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| EN 50168:1994 | Sectional specification for work area wiring cables with a common overall screen for use in digital communication |
| DIN EN 60874-19:1997-12 | Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex) (IEC 60874-19:1995 + Corrigendum 1996); German version EN 60874-19:1997 |
| EN 50169:1994 | Sectional specification for backbone cables, riser and campus, with a common overall screen for use in digital communication |
| DIN EN 60068-2-38 : 2010 | ENVIRONMENTAL TESTING - PART 2-38: TESTS - TEST Z/AD: COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST |
| EN 60825-2:2004/A2:2010 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| EN 188100:1995 | Sectional Specification: Single-mode (SM) optical fibre |
| DIN EN 188000 : 1994 | GENERIC SPECIFICATION: OPTICAL FIBRES |
| EN 188101:1995 | Family Specification: Single-mode dispersion unshifted (B1.1) optical fibre |
| IEC 60807-8:1992 | Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| DIN EN 50098-1:2003-06 | CUSTOMER PREMISES CABLING FOR INFORMATION TECHNOLOGY - PART 1: ISDN BASIC ACCESS |
| EN 50167:1994 | Sectional specification for horizontal floor wiring cables with a common overall screen for use in digital communication |
| EN 188202:1995 | Family Specification: A1b graded index multimode optical fibres |
| EN 60811-1-1:1995/A1:2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING MECHANICAL PROPERTIES |
| DIN EN 186000-1:1994-03 | GENERIC SPECIFICATION - CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES |
| DIN EN 50174-1 : 2015 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
| DIN EN 187000 : 1993 AMD 1 1996 | GENERIC SPECIFICATION - OPTICAL FIBRE CABLES |
| EN 50082-1:1997 | Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry |
| EN 186000-1 : 1993 | GENERIC SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.