DIN EN 755-1:2016-10
Current
The latest, up-to-date edition.
ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
Hardcopy , PDF
German, English
01-01-2016
National foreword
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Requirements
6 Test procedures
7 Inspection documents
8 Marking of products
9 Packaging
10 Arbitration
Annex A (normative) - Location of test pieces
Annex B (normative) - Resistance to stress-corrosion cracking
for alloy EN AW-7075 in tempers T73, T73510 and T73511
- Electrical conductivity
Bibliography
This standard is included in DIN Handbook 450/2. Describes the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy extruded rod/bar, tube and profile for general engineering applications.
DevelopmentNote |
Supersedes DIN 1746-2, DIN 1747-2 and DIN 1748-2. (07/2002)
|
DocumentType |
Standard
|
Pages |
21
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
NF EN 755-1 : 2016 | Identical |
NEN EN 755-1 : 2016 | Identical |
NBN EN 755-1 : 2016 | Identical |
UNE-EN 755-1:2016 | Identical |
SN EN 755-1:2016 | Identical |
NS EN 755-1 : 2ED 2008 | Identical |
UNI EN 755-1 : 2008 | Identical |
I.S. EN 755-1:2016 | Identical |
EN 755-1:2016 | Identical |
BS EN 755-1:2016 | Identical |
DIN 18360:2019-09 | German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Metal construction works |
DIN 18339:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - SHEET METAL ROOFING AND WALL COVERING WORK |
DIN 18360:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - METALWORK |
DIN HDBK 450/4 : 1ED 2012 | |
DIN HDBK 451 : 1ED 2002 | |
DIN 17611:2011-11 | Anodized products of aluminium and wrought aluminium alloys - Technical conditions of delivery |
DIN HDBK 450/2 : 3ED 2017 | |
DIN 14380:2014-08 | PRESSURE LIMITATION VALVE, NOMINAL PRESSURE 16 |
DIN 14345:2012-05 | FIREFIGHTING EQUIPMENT - DISTRIBUTOR C-DCD, B-CBC AND BB-CBC, NOMINAL PRESSURE 16 |
EN 13957:2008 | Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
EN 755-5:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN 755-9:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
EN 755-3:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form |
EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 755-8:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 755-4:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form |
EN 755-7:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
EN 755-6:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form |
ISO 9591:2004 | Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking |
EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
EN 2004-1:1993 | Aerospace series - Test methods for aluminium and aluminium alloy products - Part 1: Determination of electrical conductivity of wrought aluminium alloys |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 14361:2004 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.