DIN EN ISO 12402-7:2015-08 (Draft)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
01-01-2015
Superseded date
07-03-2021
€168.69
Excluding VAT
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Werkstoffe und Bestandteile
4.1 Allgemeines
4.2 Nähgarn
4.3 Textiles Flächengebilde
4.4 Gurtband und Zugband
4.5 Schnürung
4.6 Reissverschlüsse
4.7 Beschlagteile
4.8 Schaumstoff-Auftriebswerkstoff
4.9 Werkstoffe für aufblasbare Auftriebskammern
4.10 Beschichtungen aus Polymerschaumstoff
4.11 Aufblassysteme für vollständig aufblasbare und
hybride persönliche Auftriebsmittel
4.12 Gasbehälter
Anhang A (informativ) Beständigkeit von Werkstoffen gegen
Schimmelbildung: Erdeingrabversuch
Anhang B (informativ) Abriebbeständigkeit von Gewebe:
Schwingprüfverfahren (Verfahren nach Wyzenbeek)
Anhang C (informativ) Beispiel einer Konstruktionszeichnung
Literaturhinweise
Describes the minimum requirements for construction and performance of materials and components of personal flotation devices as well as relevant test methods.
| DevelopmentNote |
Supersedes DIN EN 393, DIN EN 395, DIN EN 396 and DIN EN 399. (03/2007) DRAFT 2017 issued in December 2017. (12/2017)
|
| DocumentType |
Draft
|
| Pages |
187
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| ONORM EN ISO 12402-7 : 2015 | Identical |
| ISO 12402-7:2006 | Identical |
| NBN EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
| NEN EN ISO 12402-7 : 2006 AMD 1 2011 | Identical |
| NS EN ISO 12402-7 : 2006 AMD 1 2011 | Identical |
| I.S. EN ISO 12402-7:2006 | Identical |
| BS EN ISO 12402-7 : 2007 | Identical |
| NF EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
| UNE-EN ISO 12402-7:2007 | Identical |
| DIN EN ISO 12401:2010-01 | Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009) |
| DIN EN ISO 12402-1:2005-12 | PERSONAL FLOTATION DEVICES - PART 1: LIFEJACKETS FOR SEAGOING SHIPS - SAFETY REQUIREMENTS |
| DIN EN ISO 15027-2:2013-03 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| DIN EN ISO 15027-1:2013-03 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| DIN EN ISO 12402-6:2006-12 | Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods (ISO 12402-6:2006) |
| DIN 50021:1988-06 | SPRAY TESTS WITH DIFFERENT SODIUM CHLORIDE SOLUTIONS |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 12402-5:2006 | Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements |
| DIN EN ISO 4892-2:2013-06 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| DIN 53508:2000-03 | Accelerated ageing of rubber |
| ISO 13934-2:2014 | Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method |
| ISO 9073-4:1997 | Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance |
| DIN EN ISO 2411:2016-07 (Draft) | RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF COATING ADHESION (ISO 2411:2017) |
| DIN EN 1095:1998-02 | DECK SAFETY HARNESS AND SAFETY LINE FOR USE ON RECREATIONAL CRAFT - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 6330:2012 | Textiles — Domestic washing and drying procedures for textile testing |
| ISO 12402-3:2006 | Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| DIN EN 20139:1992-09 | TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| ISO 13938-2:1999 | Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension |
| DIN EN ISO 105-B02:2014-11 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014) |
| ISO 12402-1:2005 | Personal flotation devices — Part 1: Lifejackets for seagoing ships — Safety requirements |
| ISO 2062:2009 | Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester |
| ISO 12402-2:2006 | Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements |
| DIN EN ISO 9073-4:1997-09 | Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997) |
| ISO 1926:2009 | Rigid cellular plastics — Determination of tensile properties |
| ISO 105-E02:2013 | Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water |
| DIN EN ISO 5470-2:2003-10 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003) |
| ISO 5470-2:2003 | Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader |
| ISO 12401:2009 | Small craft — Deck safety harness and safety line — Safety requirements and test methods |
| ISO 7854:1995 | Rubber- or plastics-coated fabrics — Determination of resistance to damage by flexing |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation |
| ISO 7229:2015 | Rubber- or plastics-coated fabrics — Measurement of gas permeability |
| ISO 12402-6:2006 | Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods |
| ISO 12402-4:2006 | Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements |
| DIN EN ISO 4892-1:2016-10 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| ISO 105-X12:2016 | Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing |
| ISO 12402-10:2006 | Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| DIN EN ISO 105-E02:2013-06 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013) |
| ISO 139:2005 | Textiles — Standard atmospheres for conditioning and testing |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| DIN EN ISO 4674-1:2015-04 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS (ISO 4674-1:2016) |
| ISO 105-A02:1993 | Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour |
| ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
| ISO 13938-1:1999 | Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| DIN EN ISO 2062:2010-04 | Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009) |
| DIN EN 20105-A02:1994-10 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREY SCALE FOR ASSESSING CHANGE IN COLOUR |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ISO 105-B02:2014 | Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.