DIN EN ISO 15970:2014-09
Current
The latest, up-to-date edition.
NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
Hardcopy , PDF
German
01-01-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and units
5 Density at reference conditions
6 Density at operating conditions
7 Pressure
8 Temperature
9 Compression factor
Annex A (informative) - Guidance for
instrument selection, instrument test
and operational procedures
Annex B (informative) - Instrument documentation
Bibliography
Covers requirements and procedures for the measurement of the properties of natural gas that are used mainly for volume calculation and volume conversion: density at reference and at operating conditions, pressure, temperature and compression factor.
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| ISO 15970:2008 | Identical |
| EN ISO 15970:2014 | Identical |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| DIN EN ISO 12213-3:2010-01 | Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
| IEC 60381-1:1982 | Analogue signals for process control systems. Part 1: Direct current signals |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| DIN EN ISO 12213-1:2010-01 | Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines (ISO 12213-1:2006) |
| DIN EN 60770-1 : 2011 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
| DIN EN 60079-1 : 2015-04 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' (IEC 60079-1:2014) |
| DIN EN ISO 10715:2000-09 | Natural gas - Sampling guidelines (ISO 10715:1997); English version of DIN EN ISO 10715 |
| DIN EN ISO 14532:2016-07 (Draft) | NATURAL GAS - VOCABULARY (ISO 14532:2014) |
| DIN EN 60079-11 : 2012 | EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' (IEC 60079-11:2011 + COR.:2012) |
| ISO 12213-3:2006 | Natural gas Calculation of compression factor Part 3: Calculation using physical properties |
| IEC 60770-2:2010 | Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing |
| DIN EN 60079-0 : 2014 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED + COR.:2012 + COR.:2013) |
| DIN IEC 60381-2:1980-06 | ANALOGUE SIGNALS FOR PROCESS CONTROL SYSTEMS; PART 2: DIRECT VOLTAGE SIGNALS |
| DIN 1871:1999-05 | Gaseous fuels and other gases - Density and other volumetric quantities |
| DIN EN 60770-2 : 2011 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING |
| DIN EN 60079-15 : 2011 | EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N' |
| DIN EN ISO 6976:2015-06 (Draft) | NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDICES FROM COMPOSITION (ISO 6976:2016) |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ISO 14532:2014 | Natural gas — Vocabulary |
| ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| DIN EN 60751:2009-05 | Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2008); German version EN 60751:2008 |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| ISO 12213-1:2006 | Natural gas Calculation of compression factor Part 1: Introduction and guidelines |
| DIN EN 24006:1993-08 | Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991); German version EN 24006:1993 |
| IEC 60381-2:1978 | Analogue signals for process control systems. Part 2: Direct voltage signals |
| ISO 2186:2007 | Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements |
| ISO 12213-2:2006 | Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis |
| DIN IEC 60381-1:1985-11 | ANALOGUE SIGNALS FOR PROCESS CONTROL SYSTEMS - DIRECT CURRENT SIGNALS |
| DIN EN ISO 12213-2:2010-01 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
| ISO 4006:1991 | Measurement of fluid flow in closed conduits — Vocabulary and symbols |
| DIN EN ISO 5167-1:2004-01 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| IEC 60770-1:2010 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.