• IEC 60381-2:1978

    Current The latest, up-to-date edition.

    Analogue signals for process control systems. Part 2: Direct voltage signals

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French, Russian

    Published date:  01-01-1978

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    PREFACE
    1 Scope
    2 Definitions
    3 Specified values

    Abstract - (Show below) - (Hide below)

    Applicable to analogue direct voltage signals used in industrial process measurement and control systems. lt specifies ranges of analogue direct voltage signals and the signal common; it also deals with ripple content. The analogue direct voltage signal, unlike the analogue direct current signal specified in IEC 60381-1, is not intended for transmission over long distances. This standard does not apply to signals used entirely within an element.

    General Product Information - (Show below) - (Hide below)

    Committee TC 65
    Development Note Also numbered as BS 5863-2(1980) (08/2005) Stability Date: 2018. (10/2012)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 61000-4-16 : 2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ (IEC 61000-4-16:2015)
    08/30176946 DC : DRAFT JAN 2008 BS EN 60770-1 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
    13/30287730 DC : 0 BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
    BS EN 60770-2:2010 (published 2011-03) Transmitters for use in industrial-process control systems Methods for inspection and routine testing
    DIN EN ISO 15970 E : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
    BS EN 60873 : 1993 METHODS FOR EVALUATING THE PERFORMANCE OF ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS
    CEI EN 60770-2 : 2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
    15/30324519 DC : 0 BS EN ISO 14224 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
    CEI EN 61115 : 1998 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
    BS EN ISO 15970 : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
    DIN EN 60546-2:2011-04 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
    02/208756 DC : 0 IEC 61115, ED. 2 - EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
    BS 4671(1987) : AMD 7870 METHODS FOR EVALUATING THE PERFORMANCE OF ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS
    BS EN 62703:2013 (published 2013-11) Expression of performance of fluorometric oxygen analyzers in liquid media
    UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
    DIN EN ISO 15970:2014-09 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
    I.S. EN 60770-1:2011 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
    ISA 50.1 : 1982 COMPATIBILITY OF ANALOG SIGNALS FOR ELECTRONIC INDUSTRIAL PROCESS INSTRUMENTS
    ASME MFC6M : 1998 MEASUREMENT OF FLUID FLOW IN PIPES USING VORTEX FLOW METERS
    06/30160085 DC : 0 BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
    CEI EN 60546-2 : 2013 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
    I.S. EN 60947-5-7:2003 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-7: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH ANALOGUE OUTPUT
    BS EN 60770-1 : 1999 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
    BS ISO 12764:2017 Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
    BS ISO TR 12764 : 1997 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - FLOWRATE MEASUREMENT BY MEANS OF VORTEX SHEDDING FLOWMETERS INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL
    BS EN 60546-2 : 2010 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
    IEC 61000-4-16:2015 RLV Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
    BS EN 60947-5-7:2003 Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements Requirements for proximity devices with analogue output
    BS ISO 14224 : 1999 PETROLEUM AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
    08/30176950 DC : DRAFT JAN 2008 BS EN 60770-2 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
    UNE-EN 61000-4-16:2016 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
    ISO/TR 12764:1997 Measurement of fluid flow in closed conduits Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
    BS ISO 15970 : 2008 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
    CAN/CSA-IEC 61000-4-16:17 Electromagnetic compatibility (EMC) — Part 4-16: Testing and measurement techniques — Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (Adopted IEC 61000-4-16:2015, second edition, 2015-12) | Compatibilité électromagnétique (CEM) — Partie 4-16 : Techniques d’essai et de mesure — Essai d’immunité aux perturbations conduites en mode commun dans la plage de fréquences de 0 Hz à 150 kHz (norme IEC 61000-4-16:2015 adoptée, deuxième édition, 2015:12)
    ISO 12764:2017 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
    UNI EN ISO 15970 : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
    API 689 : 2007 COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
    I.S. EN 61115:1994 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
    I.S. EN 62703:2013 EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA (IEC 62703:2013 (EQV))
    I.S. EN 60770-2:2010 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
    CEI EN 60770-1 : 2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
    BS ISO 14511:2001 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - THERMAL MASS FLOWMETERS
    I.S. EN ISO 15970:2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
    I.S. EN 61000-4-16:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ
    CSA CEI/IEC 61000.4.16 : 2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ
    CEI EN 60947-5-7 : 2005 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-7: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH ANALOGUE OUTPUT
    I.S. EN 60546-2:2010 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
    16/30333424 DC : 0 BS ISO 12764 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - FLOWRATE MEASUREMENT BY MEANS OF VORTEX SHEDDING FLOWMETERS INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL
    ISO 20456:2017 Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids
    API 551 : 2016 PROCESS MEASUREMENT
    ISO 14511:2001 Measurement of fluid flow in closed conduits Thermal mass flowmeters
    IEC 60947-5-7:2003 Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output
    IEC 61000-4-16 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ
    DIN EN ISO 6817:1995-11 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS; METHODS USING ELECTROMAGNETIC FLOW-METERS
    ISO 6817:1992 Measurement of conductive liquid flow in closed conduits Method using electromagnetic flowmeters
    IEC 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing
    IEC 60873:1986 Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems
    BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
    IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
    IEC 60770-1:2010 Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
    IEC 60770-2:2010 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
    ISO 15970:2008 Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor
    ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
    I.S. EN ISO 6817:1996 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CIRCUITS - METHODS USING ELECTROMAGNETIC FLOWMETERS
    I.S. EN ISO 14224:2016 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
    IEC 61000-4-16:2015 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
    EN 60770-1:2011 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
    EN 60546-2:2010 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
    EN 60947-5-7 : 2003 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-7: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH ANALOGUE OUTPUT
    EN 62703 : 2013 EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA
    EN 60770-2:2010 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
    EN 61000-4-16:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ (IEC 61000-4-16:2015)
    EN 61115 : 1993 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
    EN ISO 6817 : 1995 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS - METHODS USING ELECTROMAGNETIC FLOWMETERS
    EN ISO 15970 : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective