DIN EN ISO 16315:2016-08
Current
The latest, up-to-date edition.
SMALL CRAFT - ELECTRIC PROPULSION SYSTEM (ISO 16315:2016)
Hardcopy , PDF
German, English
01-01-2016
National foreword
National Annex NA (informative) - Bibliography
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Controls, monitoring, system alerts
and trips alarms
6 Protection against electric shock
7 Protection against over-current
8 Battery monitoring and installation
9 Electrical installation
10 Testing
Annex A (normative) - Information and instructions to be
included in the owner's manual
Annex B (normative) - Installation documentation
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of Directive 2013/53/EU
Specifies the design and installation of alternating current (AC) and direct current (DC) electrical systems used for the purpose of electrical propulsion and/or electrical hybrid (system with both a rechargeable battery and a fuelled power source) propulsion.
DocumentType |
Standard
|
Pages |
40
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
EN ISO 16315:2016 | Identical |
ISO 16315:2016 | Identical |
DIN EN ISO 9094:2016-05 | Small craft - Fire protection (ISO 9094:2015) |
ISO 10239:2014 | Small craft Liquefied petroleum gas (LPG) systems |
ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
IEC 61558-2-4:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
VDE 0664-20 : 2016 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) Part 1: General rules (IEC 61009-1:2010, modified + A1:2012, modified + A1:2012/Cor.:2012 + A2:2013, modified + A2:2013/Cor.:2014); |
DIN EN ISO 11105:1997-07 | SMALL CRAFT - VENTILATION OF PETROL ENGINE AND/OR PETROL TANK COMPARTMENTS |
IEC 60092-507:2014 | Electrical installations in ships - Part 507: Small vessels |
IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules |
IEC 60092-501:2013 | Electrical installations in ships - Part 501: Special features - Electric propulsion plant |
DIN EN 61009-1 : 2016 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES (IEC 61009-1:2010, MODIFIED + A1:2012, MODIFIED + A1:2012/COR.:2012 + A2:2013, MODIFIED + A2:2013/COR.:2014) |
ISO 11105:1997 | Small craft Ventilation of petrol engine and/or petrol tank compartments |
IEC 60092-352:2005 | Electrical installations in ships - Part 352: Choice and installation of electrical cables |
ISO 8666:2016 | Small craft Principal data |
DIN EN 61558-2-6 : 2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-6: PARTICULAR REQUIREMENTS AND TESTS FOR SAFETY ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING SAFETY ISOLATING TRANSFORMERS |
IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
DIN EN ISO 10240:2015-09 | SMALL CRAFT - OWNER'S MANUAL (ISO 10240:2004 + AMD 1:2015) |
IEC 61009-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules |
ISO 10133:2012 | Small craft Electrical systems Extra-low-voltage d.c. installations |
IEC 60092-353:2016 | Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV |
DIN EN ISO 25197:2015-03 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE (ISO 25197:2012 + AMD 1:2014) |
ISO 25197:2012 | Small craft Electrical/electronic control systems for steering, shift and throttle |
IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
ISO 8846:1990 | Small craft — Electrical devices — Protection against ignition of surrounding flammable gases |
DIN EN ISO 10239:2015-05 | SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS (ISO 10239:2014) |
DIN EN 61558-2-4 : 2009 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-4: PARTICULAR REQUIREMENTS AND TESTS FOR ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING ISOLATING TRANSFORMERS |
ISO 10240:2004 | Small craft Owner's manual |
IEC 60898-1:2015 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation |
ISO 13297:2014 | Small craft Electrical systems Alternating current installations |
ISO 9094:2015 | Small craft — Fire protection |
DIN EN ISO 9094:2016-05 | Small craft - Fire protection (ISO 9094:2015) |
IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
DIN EN ISO 7010:2012-10 | GRAPHISCHE SYMBOLE - SICHERHEITSFARBEN UND SICHERHEITSZEICHEN - REGISTRIERTE SICHERHEITSZEICHEN (ISO 7010:2011/AMD 5:2014) |
DIN EN ISO 13297:2015-04 | SMALL CRAFT - ELECTRICAL SYSTEMS - ALTERNATING CURRENT INSTALLATIONS (ISO 13297:2014) |
IEC 60092-101:1994+AMD1:1995 CSV | Electrical installations in ships - Part 101: Definitions and general requirements |
IEC 60092-202:2016 | Electrical installations in ships - Part 202: System design - Protection |
IEC 60092-303:1980 | Electrical installations in ships - Part 303: Equipment - Transformers for power and lighting |
DIN EN ISO 10133:2013-04 | Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012) |
VDE 0570-2-6 : 2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-6: PARTICULAR REQUIREMENTS AND TESTS FOR SAFETY ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING SAFETY ISOLATING TRANSFORMERS |
VDE 0570-2-4 : 2009 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-4: PARTICULAR REQUIREMENTS AND TESTS FOR ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING ISOLATING TRANSFORMERS |
DIN EN 60945:2003-07 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.