DIN EN ISO 7500-1:2016-05
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015)
Available format(s)
Hardcopy , PDF
Superseded date
28-07-2020
Superseded by
Language(s)
German, English
Published date
01-01-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
National Annex NA (informative) - Bibliography
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and their meanings
5 General inspection of the testing machine
6 Calibration of the force-measuring system of the testing
machine
7 Class of testing machine range
8 Verification report
9 Intervals between verifications
Annex A (normative) - General inspection of the
testing machine
Annex B (informative) - Inspection of the loading platens
of the compression testing machines
Annex C (informative) - Uncertainty of the calibration
results of the force-measuring system
Bibliography
This standard is included in DIN Handbook 19, 118/4 and 205.
| DevelopmentNote |
Supersedes DIN EN 10002-2 and DIN 51227 (01/2000) DRAFT 2017 issued in December 2017. (12/2017)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 7500-1:2016 | Identical |
| BS EN ISO 7500-1:2015 | Identical |
| ISO 7500-1:2015 | Identical |
| I.S. EN ISO 7500-1:2015 | Identical |
| UNI EN ISO 7500-1 : 2005 | Identical |
| NEN EN ISO 7500-1 : 2016 | Identical |
| NF EN ISO 7500-1 : 2016 | Identical |
| SN EN ISO 7500-1 : 2016 | Identical |
| NBN EN ISO 7500-1 : 2016 | Identical |
| ONORM EN ISO 7500-1 : 2016 | Identical |
| EN ISO 7500-1:2018 | Identical |
| NS EN ISO 7500-1 : 2018 | Identical |
| I.S. EN ISO 7500-1:2018 | Identical |
| DIN EN ISO 20504:2016-10 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPRESSIVE BEHAVIOUR OF CONTINUOUS FIBRE-REINFORCED COMPOSITES AT ROOM TEMPERATURE (ISO 20504:2006) |
| BWB TL 4220-0026 : 1ED 2002 | LIFE RAFT, 10 MAN, INFLATABLE; LIFE RAFT, 20 MAN, INFLATABLE |
| DIN V 18152:2003-10 | LIGHTWEIGHT CONCRETE SOLID BRICKS AND BLOCKS |
| DIN V 4165:2003-06 | AUTOCLAVED AERATED CONCRETE HIGH PRECISION UNITS AND ELEMENTS |
| DIN ISO 11093-6:2005-09 | Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005) |
| DIN EN ISO 12625-11:2013-04 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| DIN EN ISO 15630-2:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
| DIN EN 13567:2007-09 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 3386-1:2015-10 | POLYMERIC MATERIALS, CELLULAR FLEXIBLE - DETERMINATION OF STRESS-STRAIN CHARACTERISTICS IN COMPRESSION - PART 1: LOW-DENSITY MATERIALS (ISO 3386-1:1986 + AMD 1:2010) |
| DIN EN ISO 10321:2008-08 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
| DIN EN 12385-1:2009-01 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| VDI/VDE 2624 Blatt 3.1:2011-12 | Measurement of mechanical quantities - Instructions for the calibration of test units for spring band hose clamps |
| VDI/BV-BS 6205 Blatt 2:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market |
| DIN EN ISO 13356:2016-02 | IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIA-STABILIZED TETRAGONAL ZIRCONIA (Y-TZP) (ISO 13356:2015) |
| DIN EN ISO 6892-2:2011-05 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| DIN EN ISO 3266:2016-05 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
| DIN EN ISO 8067:2009-06 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TEAR STRENGTH |
| DIN 53579:2015-04 | TESTING OF FLEXIBLE CELLULAR MATERIALS - INDENTATION TEST ON FINISHED PARTS |
| DIN 29595:2007-04 | Welding in aerospace - Fusion welded metallic components - Requirements |
| DIN EN ISO 17161:2016-10 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS (ISO 17161:2014) |
| DIN EN ISO 15630-1:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
| DIN EN ISO 10271:2011-10 | DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS |
| DIN EN ISO 3376:2012-03 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF TENSILE STRENGTH AND PERCENTAGE EXTENSION (ISO 3376:2011) |
| DIN EN ISO 17236:2016-07 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF EXTENSION SET (ISO 17236:2016) |
| DIN EN ISO 3386-2:2010-09 | Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997 + Amd 1:2010) (includes Amendment A1:2010) |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN ISO 21181:2013-09 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE RELAXED ELASTIC MODULUS (ISO 21181:2013) |
| DIN EN ISO 9513:2013-05 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
| VDI 2700 Blatt 3.3:2013-05 | Securing of loads on road vehicles - Cargo nets for load securing |
| VDI 2700 Blatt 14:2011-09 | Securing of loads on road vehicles - Determination of coefficients of friction |
| VDI/VDE 2624 Blatt 2.1:2008-12 | Measurement of mechanical quantities - Instructions for calibration of mobile force measurement systems |
| DIN V 105-100:2005-10 | CLAY MASONRY UNITS - PART 100: CLAY MASONRY UNITS WITH SPECIFIC PROPERTIES |
| DIN EN ISO 16841:2014-07 | STEEL WIRE ROPES - PULLING EYES FOR ROPE INSTALLATION - TYPES AND MINIMUM REQUIREMENTS (ISO 16841:2014) |
| DIN ISO 10275:2009-06 | METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT |
| DIN EN ISO 7500-1 Beiblatt 3:1999-11 | METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES; VERIFICATION AND CALIBRATION OF THE FORCE-MEASURING SYSTEM; GENERAL FOR REQUIREMENTS, VERIFICATION AND CALIBRATION OF FATIGUE TESTING MACHINES |
| DIN 51220:2003-08 | General requirements for materials testing machines, including verification and calibration |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| DIN EN ISO 13934-2:2014-06 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
| DIN EN ISO 13934-1:2013-08 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013) |
| DIN EN ISO 21180:2013-09 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE MAXIMUM TENSILE STRENGTH (ISO 21180:2013) |
| DIN EN ISO 14544:2016-10 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF COMPRESSION PROPERTIES (ISO 14544:2013) |
| DIN V 18153:2003-10 | CONCRETE MASONRY UNITS (NORMAL-WEIGHT CONCRETE) |
| DIN EN ISO 6892-3:2015-07 | METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015) |
| DIN HDBK 205 : 5ED 2006 | MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 3 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMABHAENGIG); SCHWEISSVERBINDUNGEN, METALLKLEBUNGEN |
| DIN EN ISO 10275:2014-08 | METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT (ISO 10275:2007) |
| DIN ISO 15759:2006-05 | Medical infusion equipment - Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process (ISO 15759:2005) |
| DIN EN ISO 10748:2011-06 | Footwear - Test method for slide fasteners - Slider locking strength (ISO 10748:2011) |
| DIN EN ISO 12625-12:2010-05 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| DIN ISO 16237:2015-11 | MECHANICAL JOINING - DESTRUCTIVE TESTING OF JOINTS - SPECIMEN DIMENSIONS AND TEST PROCEDURE FOR CROSS-TENSION TESTING OF SINGLE JOINTS (ISO 16237:2015) |
| DIN V 105-1:2002-06 | CLAY MASONRY UNITS - PART 1: SOLID UNITS AND VERTICALLY PERFORATED UNITS OF BULK DENSITY CLASSES >= 1.2 |
| DIN HDBK 118/4 : 4ED 2013 | PAPIER, PAPPE UND FASERSTOFF 4 - DIN EN ISO 186 BIS DIN EN ISO 15755 SOWIE DIN EN 20187 BIS DIN EN 27213 |
| DIN EN ISO 15630-3:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| DIN EN ISO 9187-1:2011-01 | Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010) |
| DIN EN ISO 2740:2009-10 | Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009) |
| DIN EN ISO 12625-9:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
| DIN EN ISO 2439:2009-05 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
| DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| DIN EN ISO 13935-2:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014) |
| DIN EN ISO 13935-1:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014) |
| DIN EN ISO 12236:2006-11 | Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
| DIN EN ISO 12737:2011-04 | METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
| DIN EN ISO 21182:2013-09 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION (ISO 21182:2013) |
| DIN EN ISO 9856:2016-06 (Draft) | CONVEYOR BELTS - DETERMINATION OF ELASTIC AND PERMANENT ELONGATION AND CALCULATION OF ELASTIC MODULUS (ISO 9856:2016) |
| DIN V 18151:2003-10 | LIGHTWEIGHT HOLLOW BLOCKS |
| DIN HDBK 19 : 17ED 2015 | MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 1 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMUNABHAENGIG), PRUEFMASCHINEN |
| DIN EN ISO 8362-7:2011-03 | Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006) |
| DIN EN ISO 10734:2016-10 | FOOTWEAR - TEST METHOD FOR SLIDE FASTENERS - STRENGTH OF SLIDE FASTENER PULLERS (ISO 10734:2016) |
| DIN EN ISO 26203-1:2010-06 | METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS |
| DIN 14920:2010-10 | LINES FOR FIRE-BRIGADES - REQUIREMENTS, TEST METHODS, MAINTENANCE |
| DIN EN ISO 12996:2013-10 | MECHANICAL JOINING - DESTRUCTIVE TESTING OF JOINTS - SPECIMEN DIMENSIONS AND TEST PROCEDURE FOR TENSILE SHEAR TESTING OF SINGLE JOINTS (ISO 12996:2013) |
| DIN V 106-1:2003-02 | CALCIUM SILICATE UNITS - PART 1: SOLID UNITS, PERFORATED UNITS, SOLID BLOCKS, PERFORATED BLOCKS, HIGH PRECISION UNITS, HIGH PRECISION ELEMENTS, CHAMFERED UNITS, SLABS, SHAPED UNITS |
| DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| DIN EN ISO 25619-2:2015-12 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 2: DETERMINATION OF SHORT-TERM COMPRESSION BEHAVIOUR (ISO 25619-2:2015) |
| DIN 488-6:2010-01 | Reinforcing steel - Part 6: Assessment of conformity |
| DIN EN ISO 14916:2015-09 (Draft) | THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017) |
| DIN EN ISO 3377-2:2016-07 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF TEAR LOAD - PART 2: DOUBLE EDGE TEAR (ISO 3377-2:2016) |
| DIN EN ISO 3377-1:2012-03 | Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
| DIN EN ISO 10319:2015-09 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST (ISO 10319:2015) |
| DIN EN ISO 14801:2008-02 | DENTISTRY - IMPLANTS - DYNAMIC LOADING TEST FOR ENDOSSEOUS DENTAL IMPLANTS (ISO 14801:2016) |
| DIN EN ISO 23910:2008-01 | LEATHER - PHYSICAL AND MECHANICAL TESTS - MEASUREMENT OF STITCH TEAR RESISTANCE (ISO 23910:2017) |
| DIN EN ISO 6892:2007-05 (Draft) | METALLIC MATERIALS - TENSILE TESTING - METHOD OF TESTING AT AMBIENT TEMPERATURE |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 376:2011 | Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines |
| DIN EN ISO 9513:2013-05 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.