DIN EN ISO 9809-3:2010-10
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
Hardcopy , PDF
15-04-2020
English
01-01-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole
5 Abnahme und Prüfung
6 Werkstoffe
6.1 Allgemeine Anforderungen
6.2 Kontrollen der chemischen Zusammensetzung
6.3 Wärmebehandlung
6.4 Prüfanforderungen
6.5 Nichterfüllung der Prüfanforderungen
7 Auslegung
7.1 Allgemeine Anforderungen
7.2 Berechnung der Dicke des zylindrischen
Flaschenkörpers
7.3 Berechnung der konvexen Enden
(Köpfe und Böden)
7.4 Berechnung der konkaven Böden
7.5 Auslegung des Flaschenhalses
7.6 Fussringe
7.7 Halsringe
7.8 Auslegungszeichnung
8 Bau und Ausführung
8.1 Allgemeines
8.2 Wanddicke
8.3 Oberflächenfehler
8.4 Ultraschallprüfung
8.5 Unrundheit
8.6 Mittlerer Durchmesser
8.7 Geradheit
8.8 Vertikalität und Standsicherheit
8.9 Halsgewinde
9 Baumusterzulassungsverfahren
9.1 Allgemeine Anforderungen
9.2 Baumusterprüfungen
9.3 Baumusterzulassungsbescheinigung
10 Losprüfungen
10.1 Allgemeine Anforderungen
10.2 Zugversuch
10.3 Biegeprüfung und Querfaltversuch
10.4 Kerbschlagbiegeversuch
11 Prüfungen/Untersuchungen an jeder Flasche
11.1 Allgemeines
11.2 Hydraulische Prüfung
11.3 Härteprüfung
11.4 Dichtheitsprüfung
11.5 Überprüfung des Fassungsraumes
12 Zertifizierung
13 Kennzeichnung
Anhang A (informativ) Beschreibung und Bewertung
von Herstellungsfehlern und Bedingungen
für die Zurückweisung von nahtlosen
Gasflaschen aus Stahl zum Zeitpunkt der
Endkontrolle durch den Hersteller
A.1 Einleitung
A.2 Allgemeines
A.3 Herstellungsfehler
A.4 Zurückgewiesene Flaschen
Anhang B (normativ) Ultraschallprüfung
B.1 Einleitung
B.2 Allgemeine Anforderungen
B.3 Fehlererkennung bei zylindrischen Teilen
B.4 Messung der Wanddicke
B.5 Auswertung der Ergebnisse
B.6 Zertifizierung
Anhang C (informativ) Baumusterzulassungsbescheinigung
Anhang D (informativ) Abnahmebescheinigung
Literaturhinweise
Anhang NA (normativ) Besondere europäische Anforderungen
NA.1 Normative Verweisungen
NA.2 Technische Anforderungen
Anhang NB (informativ) Anleitung zur Verwendung der
Konformitätsbewertungsmodule bei
Anwendung dieser Norm
Defines minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable normalized or normalized and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases.
| DevelopmentNote |
Supersedes DIN EN 1964-1. (10/2010)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN ISO 9809-3:2010 | Identical |
| ISO 9809-3:2010 | Identical |
| DIN EN ISO 11114-1:2012-07 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012 + AMD.1:2017) |
| DIN EN ISO 3807:2015-02 | GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING |
| DIN EN ISO 11114-4:2015-08 (Draft) | TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017) |
| DIN EN ISO 13769:2016-05 (Draft) | GAS CYLINDERS - STAMP MARKING |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 11116-2:1999 | Gas cylinders 17E taper thread for connection of valves to gas cylinders Part 2: Inspection gauges |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 9329-1:1989 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| DIN EN ISO 148-1:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
| DIN EN ISO 7438:2016-07 | Metallic materials - Bend test (ISO 7438:2016) |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 10286:2007 | Gas cylinders Terminology |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| ISO 11191:1997 | Gas cylinders 25E taper thread for connection of valves to gas cylinders Inspection gauges |
| DIN EN ISO 6508-1:2016-12 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016 |
| ISO 6406:2005 | Gas cylinders Seamless steel gas cylinders Periodic inspection and testing |
| ISO 11116-1:1999 | Gas cylinders 17E taper thread for connection of valves to gas cylinders Part 1: Specifications |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ISO 11117:2008 | Gas cylinders Valve protection caps and valve guards Design, construction and tests |
| ISO 13769:2007 | Gas cylinders Stamp marking |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.