Skip to content
Please enter a keyword to search

  • DIN IEC 60359:1993-09

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    EXPRESSION OF THE PERFORMANCE OF ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT

    Available format(s): 

    Superseded date:  01-09-2002

    Language(s): 

    Published date:  12-01-2013

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Vorwort
    Einleitung
    Einführung
    Hauptabschnitt 1: Allgemeine Grundlagen
    1 Anwendungsbereich
    2 Zweck
    3 Grössen, Grössenwerte und Bereiche, die
       anzugeben und zu messen sind
    Hauptabschnitt 2: Begriffe
    4 Begriffe
    Hauptabschnitt 3: Festlegen technischer Daten
    5 Festlegen von Werten und (Bereichen
    6 Anforderungen an IEC-Produktnormen
    7 Festlegen von Grenzwerten der Messabweichungen
    8 Wahl von Einflussgrössen
    Hauptabschnitt 4: Vorgehen bei Abnahmeprüfungen
    9 Allgemeine Regeln
    10 Messen von Eigenabweichung und Einflusseffekten
    11 Bestätigung der Übereinstimmung mit festgelegten
       Grenzwerten der Messabweichungen
    12 Prüfung auf Beschädigung durch Umwelteinflüsse
    13 Berücksichtigung des Einflusses der Prüfeinrichtung
    14 Bedingungen für den Prüfling
    15 Referenzbedingungen
    Anhang A Statistische Berechnung der
             Betriebsmessabweichung
    Anhang B Anforderungen an die Umweltbedingungen
             aus der ersten Ausgabe der Publikation IEC 359

    Abstract - (Show below) - (Hide below)

    Applies to the specification of the performance of the electrical and electronic equipment and instruments and the accessories used with them which measure electrical quantities (indicating and recording instruments), or supply measured electrical quantities (supply instruments), such as signal generators and some power supplies, or measure non-electrical quantities using electrical means, excluding any parts, such as transducers. The expression of performance covers only the electrical or electronic part. This standard provides methods for ensuring uniformity in the specification and measurement of errors of the above equipment.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes DIN 43745 (07/2002)
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN 61187:1995-06 ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION
    VDE 0418-20 : 1996 ELECTRIC INTEGRATING METERS - ALTERNATING CURRENT STATIC VARHOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
    VDE 0418-8 : 1994 ALTERNATING-CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2 S AND 0.5 S)
    DIN EN 60687 : 1994 ALTERNATING-CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2 S AND 0.5 S)
    DIN EN 61557-1 : 2007 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
    VDE 0418-7 : 2001 ALTERNATING CURRENT ELECTRONIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
    DIN EN 61268 : 1996 ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)

    Standards Referencing This Book - (Show below) - (Hide below)

    DIN IEC 60721-3-2:1987-08 ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; TRANSPORTATION
    DIN IEC 60721-3-7:1989-09 ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES
    IEC 60050-131:2002 International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory
    IEC 60654-4:1987 Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences
    IEC 60555-1:1982 Disturbances in supply systems caused by household appliances and similar electrical equipment. Part 1: Definitions.
    DIN IEC 60688-1:1990-11 ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING A.C. ELECTRICAL QUANTITIES INTO D.C. ELECTRICAL QUANTITIES - GENERAL PURPOSES TRANSDUCERS
    DIN EN 60051-3:1991-11 Direct acting indicating analogue electrical measuring instruments and their accessories; part 3: special requirements for wattmeters and varmeters (IEC 60051-3:1984, edition 4); german version EN 60051-3:1989
    DIN 43780:1976-08 ELECTRICAL MEASURING INSTRUMENTS - DIRECT ACTING INDICATING ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES
    DIN IEC 60721-3-5:1988-04 ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; GROUND VEHICLE INSTALLATIONS
    IEC 60160:1963 Standard atmospheric conditions for test purposes
    DIN 43750:1974-11 DOCUMENTATION TO BE SUPPLIED WITH ELECTRONIC MEASURING APPARATUS
    DIN IEC 60654-3:1985-09 OPERATING CONDITIONS FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT; MECHANICAL INFLUENCES
    DIN 40050:1980-07 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    DIN IEC 60654-2:1995-01 OPERATING CONDITIONS FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT; POWER
    IEC 60688:2012 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
    DIN VDE 0838-1 : 1987 DISTURBANCES IN SUPPLY SYSTEMS CAUSED BY HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL EQUIPMENT; PART 1: DEFINITIONS
    DIN IEC 60654-1:1984-01 OPERATING CONDITIONS FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT; TEMPERATURE, HUMIDITY AND BAROMETRIC PRESSURE
    DIN 40053-4:1980-07 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, JET NOZZLE
    DIN IEC 60721-3-1:1990-04 ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; STORAGE
    DIN 40200:1981-10 NOMINAL VALUE, LIMITING VALUE, RATED VALUE, RATING - CONCEPTS
    DIN EN 60051-7:1991-11 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES; PART 7: SPECIAL REQUIREMENTS FOR MULTI-FUNCTION INSTRUMENTS
    IEC 60484:1974 Indirect acting electrical measuring instruments
    DIN IEC 60721-3-6:1990-06 ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; SHIP ENVIRONMENT
    DIN EN 60051-1 : 1999 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS (IEC 60051-1:2016)
    DIN IEC 60721-3-4:1989-10 ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS
    DIN EN 60051-8:1991-11 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES; PART 8: SPECIAL REQUIREMENTS FOR ACCESSORIES
    DIN EN 60051-5:1991-11 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES; PART 5: SPECIAL REQUIREMENTS FOR PHASE METERS, POWER FACTOR METERS AND SYNCHROSCOPES
    DIN IEC 60654-4:1990-12 OPERATING CONDITIONS FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT; CORROSIVE AND EROSIVE INFLUENCES
    DIN EN 60051-2:1991-11 Direct acting indicating analogue electrical measuring instruments and their accessories; part 2: special requirements for ammeters and voltmeters (IEC 60051-2:1984, edition 4); german version EN 60051-2:1989
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    DIN 43782:1977-05 INDIRECT ACTING ELECTRICAL MEASURING INSTRUMENTS - GENERAL REQUIREMENTS
    DIN 40050-9:1993-05 ROAD VEHICLES; DEGREES OF PROTECTION (IP-CODE); PROTECTION AGAINST FOREIGN OBJECTS, WATER AND CONTACT; ELECTRICAL EQUIPMENT
    DIN EN 60051-4:1991-11 Direct acting indicating analogue electrical measuring instruments and their accessories; part 4: special requirements for frequency meters (IEC 60051-4:1984, edition 4); german version EN 60051-4:1989
    IEC 60051:1973 Recommendations for direct acting indicating electrical measuring instruments and their accessories
    DIN IEC 60721-3-3:1990-04 ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; STATIONARY USE AT WEATHER PROTECTED LOCATIONS
    DIN 40050-10:1975-02 DEGREES OF PROTECTION OF ENCLOSURES; PROTECTION OF PERSONS AGAINST CONTACT WITH LIVE PARTS, PROTECTION OF EQUIPMENT AGAINST INGRESS OF SOLID FOREIGN BODIES & OF WATER, SMALL TRANSFORMERS TILL 16 KVA
    DIN 40053-1:1980-07 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, DRIPPING APPARATUS
    DIN 40053-2:1980-07 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, OSCILLATING TUBE
    IEC 60654-1:1993 Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions
    DIN IEC 60721-3-0:1987-08 ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; INTRODUCTION AND GUIDE FOR USERS
    DIN EN 60688:2013-08 ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING A.C. AND D.C. ELECTRICAL QUANTITIES TO ANALOGUE OR DIGITAL SIGNALS (IEC 60688:2012)
    DIN 40053-3:1980-07 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, SPRAY NOZZLE
    DIN EN 60051-6:1991-11 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES; PART 6: SPECIAL REQUIREMENTS FOR OHMMETERS (IMPEDANCE METERS) AND CONDUCTANCE METERS
    DIN EN 60051-9:1991-11 Direct acting indicating analogue electrical measuring instruments and their accessories; part 9: recommended test methods (IEC 60051-9:1988, edition 4); german version EN 60051-9:1989
    IEC 60654-3:1983 Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective