• IEC 60050-131:2002

    Current The latest, up-to-date edition.

    International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s): 

    Published date:  21-06-2002

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION - Principles and rules followed
    1 Scope
    2 Normative references
    3 Terms and definitions
    Section 131-11 - General
    Section 131-12 - Circuit elements and their characteristics
    Section 131-13 - Network topology
    Section 131-14 - Two-port and n-port networks
    Section 131-15 - Methods of circuit theory
    LIST OF SYMBOLS
    INDEX in French, English, Arabic, Chinese, German, Spanish,
    Japanese, Polish, Portuguese and Swedish

    Abstract - (Show below) - (Hide below)

    It has the status of a horizontal standard in accordance with IEC Guide 108.

    General Product Information - (Show below) - (Hide below)

    Committee TC 1
    Development Note Supersedes IEC 60050-08 (02/2001) NEW CHILD AMD 3 2019 IS NOW ADDED NEW CHILD AMD 4 2021 IS NOW ADDED.
    Document Type Standard
    Product Note NEW CHILD AMD 3 2019 IS NOW ADDED NEW CHILD AMD 4 2021 IS NOW ADDED.
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    09/30213911 DC : 0 BS EN 61000-4-6 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS IMMUNITY TEST
    BS EN 60694 : 1997 COMMON SPECIFICATION FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    BIS IS/IEC 80000-6 : 2008 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
    UNE-EN 50564:2012 Electrical and electronic household and office equipment - Measurement of low power consumption
    BS ISO 6196-7 : 1992 MICROGRAPHICS - VOCABULARY - PART 7: COMPUTER MICROGRAPHICS
    CEI EN 60349-4 : 2014 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
    CEI EN 60027-7 : 2011 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
    14/30295890 DC : 0 BS EN 1330-1 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS
    IEC 61000-4-6:2008 RLV Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields
    BS EN 60349-1 : 2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
    I.S. EN 80000-6:2008 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
    BS EN 60375 : 2003 CONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS
    DD ISO/TS 16952-1:2007 Technical product documentation. Reference designation system General application rules
    NBR 8455 : 1984 MATERIAIS OXIDOS FERROMAGNETICOS
    15/30328086 DC BS EN 61557-12. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 12. Power metering and monitoring devices (PMD)
    14/30279327 DC : 0 BS EN 61800-3 AMD2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
    15/30300738 DC : DRAFT MAY 2015 BS EN 60027-2 ED 4.0 - LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
    01/200383 DC : DRAFT JAN 2001 IEC 61000-4-6 ED.2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES. IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    CEI EN 60404-8-6 : 2009 MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS
    IEC 60349:1991 Electric traction. Rotating electrical machines for rail and road vehicles
    DIN ISO/TS 81346-3;DIN SPEC 1330:2013-09 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012)
    PD IEC/TR 61000-1-7:2016 (published 2016-03) Electromagnetic compatibility (EMC) General. Power factor in single-phase systems under non-sinusoidal conditions
    16/30322212 DC : DRAFT APR 2016 BS EN 61724-1 ED 1.0 - PHOTOVOLTAIC SYSTEM PERFORMANCE - PART 1: MONITORING
    PREN 1330-1 : DRAFT 2014 NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS
    CEI EN 60027-4 : 2008 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 4: ROTATING ELECTRICAL MACHINES
    05/30133436 DC : DRAFT MAY 2005
    09/30182105 DC : 0 BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
    DIN SPEC 1330 : 2013 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012)
    BS EN 62520 : 2011 RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS (LIM) FED BY POWER CONVERTERS
    BS ISO 14617-1 : 2002 GRAPHICAL SYMBOLS FOR DIAGRAMS - PART 1: GENERAL INFORMATION AND INDEXES
    PD IEC/TR 61967-1-1:2015 Integrated circuits. Measurement of electromagnetic emissions General conditions and definitions. Near-field scan data exchange format
    17/30356253 DC : 0 BS EN 62933-1 - ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 1: TERMINOLOGY
    BS EN 60349-4 : 2013 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
    NF EN 60027-7 : 2011 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
    BS PD ISO/TS 81346-3 : 2012 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM
    03/112147 DC : DRAFT JULY 2003 IEC 61967-3 ED.1 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 3: MEASUREMENT OF RADIATED EMISSIONS - SURFACE SCAN METHOD
    CEI UNI EN 80000-6 : 2009 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
    DIN IEC 60359:1993-09 EXPRESSION OF THE PERFORMANCE OF ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT
    BS EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Performance measuring and monitoring devices (PMD)
    17/30355674 DC : 0 BS EN 63006 - WIRELESS POWER TRANSFER (WPT) GLOSSARY OF TERMS (TA 15)
    09/30166871 DC : 0 BS EN 62520 - RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS FED BY POWER CONVERTERS
    01/204134 DC : DRAFT JUN 2001 IEC 62132-1 ED.1 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY, 150 KHZ TO 1 GHZ - PART 1: GENERAL AND DEFINITIONS
    IEC 61557-12:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)
    I.S. EN 50564:2011 ELECTRICAL AND ELECTRONIC HOUSEHOLD AND OFFICE EQUIPMENT - MEASUREMENT OF LOW POWER CONSUMPTION
    04/30111859 DC : 0 IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS
    PREN 50563 : DRAFT 2011 EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES
    10/30230737 DC : DRAFT JULY 2010 BS EN 60683 - INDUSTRIAL ELECTRO HEATING EQUIPMENT - TEST METHODS FOR SUBMERGED ARC FURNACES
    15/30265353 DC : 0 BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
    BS EN 50564 : 2011 ELECTRICAL AND ELECTRONIC HOUSEHOLD AND OFFICE EQUIPMENT - MEASUREMENT OF LOW POWER CONSUMPTION
    BS EN 61967-5 : 2003 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 5: MEASUREMENT OF CONDUCTED EMISSIONS - WORKBENCH FARADAY CAGE METHOD
    BS EN 80000-6:2008 (published 2008-09) Quantities and units Electromagnetism
    DD IEC TS 62433-1 : 2011 EMC IC MODELLING - PART 1: GENERAL MODELLING FRAMEWORK
    14/30297921 DC : 0 BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS
    CEI EN 61967-8 : 2012 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS - PART 8: MEASUREMENT OF RADIATED EMISSIONS - IC STRIPLINE METHOD
    CEI EN 61967-2 : 2006 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 2: MEASUREMENT OF RADIATED EMISSIONS - TEM CELL AND WIDEBAND TEM CELL METHOD
    BS EN 62132-2 : 2011 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 2: MEASUREMENT OF RADIATED IMMUNITY - TEM CELL AND WIDEBAND TEM CELL METHOD
    BS EN 60349-2 : 2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
    DIN ISO/TS 16952-1:2007-03 TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 1: GENERAL APPLICATION RULES
    11/30244464 DC : 0 BS EN 50563 - EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES
    I.S. EN 62520:2011 RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS (LIM) FED BY POWER CONVERTERS
    DD IEC TS 62215-2 : 2007 INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 2: SYNCHRONOUS TRANSIENT INJECTION METHOD
    I.S. EN 61204-3:2000 LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
    UNE-EN 50563:2012 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes
    06/30156472 DC : DRAFT SEP 2006 BS EN 60146-1-1 - SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
    BS EN 60027-7 : 2010 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
    11/30206274 DC : 0 BS EN 60349-4 - ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
    BS EN 60646 : 1999 TEST METHODS FOR CRUCIBLE INDUCTION FURNACES
    IEC 60909-0:2016 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
    CEI EN 61642 : 1998 INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS -APPLICATION OF FILTERS AND SHUNT CAPACITORS
    14/30312943 DC : 0 BS PD IEC/TR 61000-1-7 ED1.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-7: GENERAL - POWER FACTOR IN SINGLE PHASE SYSTEMS UNDER NON-SINUSOIDAL CONDITIONS
    BS EN 61967-2 : 2005 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 2: MEASUREMENT OF RADIATED EMISSIONS - TEM CELL AND WIDEBAND TEM CELL METHOD
    NF EN 61204-3 : 2001 LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
    EN 61724-1 : 2017 PHOTOVOLTAIC SYSTEM PERFORMANCE - PART 1: MONITORING (IEC 61724-1:2017)
    BS EN 61800-3 : 2004 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
    BS EN 60027-2 : 2007 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
    NF EN 50563 : 2013 AMD 1 2014 EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES
    DIN V ENV 60349-2 : 1994 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
    I.S. EN 61800-3:2005 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV))
    IEC 61724-1:2017 Photovoltaic system performance - Part 1: Monitoring
    IEC TS 62446-3:2017 Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 3: Photovoltaic modules and plants - Outdoor infrared thermography
    BS EN 60027-4 : 2007 LETTER SYMBOLS TO BE USED IN ELECTRIC TECHNOLOGY - PART 4: ROTATING ELECTRIC MACHINES
    CEI EN 62132-2 : 2012 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY PART 2: MEASUREMENT OF RADIATED IMMUNITY - TEM CELL AND WIDEBAND TEM CELL METHOD
    BS EN 62132-5 : 2006 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY, 150 KHZ TO 1 GHZ - PART 5: WORKBENCH FARADAY CAGE METHOD
    09/30191126 DC : DRAFT FEB 2009 BS EN 62132-8 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 8: MEASUREMENT OF RADIATED IMMUNITY - IC STRIP LINE METHOD
    16/30338711 DC : 0 BS IEC 60404-8-6 ED 3.0 - MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS
    10/30230724 DC : DRAFT JULY 2010 BS EN 60676 - INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR DIRECT ARC FURNACES
    09/30191130 DC : DRAFT FEB 2009 BS EN 61967-8 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS - PART 8: MEASUREMENT OF RADIATED EMISSIONS - IC STRIPLINE METHOD
    BS EN 61642 : 1998 INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS - APPLICATION OF FILTERS AND SHUNT CAPACITORS
    BS PD IEC TS 62446-3 : 2017 PHOTOVOLTAIC (PV) SYSTEMS - REQUIREMENTS FOR TESTING, DOCUMENTATION AND MAINTENANCE - PART 3: PHOTOVOLTAIC MODULES AND PLANTS - OUTDOOR INFRARED THERMOGRAPHY
    BS 4889(1990) : 1990 METHOD FOR SPECIFYING THE PERFORMANCE OF ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT
    DD IEC TS 61968-2 : 2011 APPLICATION INTEGRATION AT ELECTRIC UTILITIES - SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT - PART 2: GLOSSARY
    I.S. EN 60349-1:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
    BS IEC 60050-113 : 2011 INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 113: PHYSICS FOR ELECTROTECHNOLOGY
    UNE-EN 60027-4:2011 Letter symbols to be used in electrical technology -- Part 4: Rotating electric machines
    06/30151320 DC : DRAFT JUN 2006 BS IEC 62132-2 - INTEGRATED CIRCUITS, MEASUREMENT OF ELECTRO MAGNETIC IMMUNITY, 150 KHZ TO 1 GHZ - PART 2: MEASUREMENT OF RADIATED 1 MM UNITY TEM-CELL AND WIDEBAND TEM-CELLMETHOD
    NFC 03 002 : 2002 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
    CSA C62301:2011 HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER
    UNE-IEC 60050-112:2012 International Electrotechnical Vocabulary (IEV) - Part 112: Quantities and units
    05/30137850 DC : DRAFT AUG 2005 IEC 62215-2 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 2: IMPULSE INJECTION METHOD
    12/30268333 DC : 0 BS EN 62132-1 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 1: GENERAL CONDITIONS AND DEFINITIONS
    02/206053 DC : DRAFT JULY 2002 IEC 62301 ED.1 - MEASUREMENT OF STANDBY POWER
    11/30206517 DC : 0 BS EN 62132-6 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 6: LOCAL INJECTION HORN ANTENNA (LIHA) METHOD
    16/30350588 DC : 0 BS PD IEC/TS 62446-3 ED 1.0 - PHOTOVOLTAIC (PV) SYSTEMS - REQUIREMENTS FOR TESTING, DOCUMENTATION AND MAINTENANCE - PART 3: OUTDOOR INFRARED THERMOGRAPHY OF PHOTOVOLTAIC MODULES AND PLANTS
    NBR IEC 80000-6 : 2016 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
    IEC 60781:1989 Application guide for calculation of short-circuit currents in low-voltage radial systems
    DD IEC TS 61967-3 : DRAFT JAN 2006 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - MEASUREMENT OF RADIATED EMISSIONS - SURFACE SCAN METHOD
    NF EN 62271-1 : 2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
    IEC 60404-12:1992 Magnetic materials - Part 12: Guide to methods of assessment of temperature capability of interlaminar insulation coatings
    01/209170 DC : DRAFT DEC 2001 IEC 62132-5 ED.1 - INTEGRATED CIRCUITS, MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 5: MEASUREMENT OF CONDUCTED IMMUNITY - WORKBENCH FARADAY CAGE METHOD
    I.S. EN 60404-8-6:2017 MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS
    BS EN 60404-8-6:2017 Magnetic materials Specifications for individual materials. Soft magnetic metallic materials
    BS EN 61810-7:2006 Electromechanical elementary relays Test and measurement procedures
    UNE-IEC 60050-113:2012 International Electrotechnical Vocabulary (IEV) - Part 113: Physics for electrotechnology
    EN 62040-3:2011 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS (IEC 62040-3:2011)
    07/30065083 DC : DRAFT JUNE 2007 BS EN 60027-4 - LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 4: ROTATING ELECTRIC MACHINES
    12/30270636 DC : 0 BS EN 60909-0 - SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS
    08/30192767 DC : 0 BS EN 62301 - HOUSEHOLD ELECTRICAL APPLIANCES - MANAGEMENT OF STANDBY POWER
    CAN/CSA-C393-12 (R2017) Test methods for measuring power consumption in low and idle power modes of commercial and industrial equipment
    IEC 60747-1:2006+AMD1:2010 CSV Semiconductor devices - Part 1: General
    CSA C393 : 2012 : INC : UPD 1 : 2014 TEST METHODS FOR MEASURING POWER CONSUMPTION IN LOW AND IDLE POWER MODES OF COMMERCIAL AND INDUSTRIAL EQUIPMENT
    BS EN 60146-1-1 : 2010 SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
    09/30182101 DC : 0 BS EN 60349-1 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
    BS EN 60909-0:2016 SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS
    CAN/CSA-C62301:2011(R2016) HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER
    CSA C393 : 2012 TEST METHODS FOR MEASURING POWER CONSUMPTION IN LOW AND IDLE POWER MODES OF COMMERCIAL AND INDUSTRIAL EQUIPMENT
    UNE-EN 61557-12:2010 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD)
    I.S. EN 60349-4:2013 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER (IEC 60349-4:2012 (EQV))
    IEC 61204-3 REDLINE : 3ED 2016 LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
    CSA C61000-4-6 : 2009 : R2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    CSA C61000-4-6 : 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    NF EN 60027-2 : 2007 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
    NF EN 80000-6 : 2008 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
    IEC TR 61967-1-1:2015 Integrated circuits - Measurement of electromagnetic emissions - Part 1-1: General conditions and definitions - Near-field scan data exchange format
    CEI EN 60349-2 : 2012 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
    IEC 62933-1:2018 Electrical energy storage (EES) systems - Part 1: Vocabulary
    I.S. HD 60027-2:2003 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
    I.S. EN 50563:2011 EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES
    I.S. EN 60375:2003 CONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS
    BS 173-1(1992) : 1992 ELECTRIC TRACTION (RAIL AND ROAD VEHICLES) - SPECIFICATION FOR ROTATING ELECTRICAL MACHINES
    UNE-EN 62520:2012 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
    I.S. EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
    ISO 14617-1:2005 Graphical symbols for diagrams Part 1: General information and indexes
    BS EN 62040-1 : 2008 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS
    I.S. EN 60694:1999 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    I.S. EN 61810-7:2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
    BS IEC 60747-1 : 2006 SEMICONDUCTOR DEVICES - PART 1: GENERAL
    I.S. EN 60027-7:2010 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
    I.S. EN IEC 62933-1:2018 ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 1: VOCABULARY
    BS EN 62271-1:2017 High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
    I.S. EN 61140:2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
    I.S. EN 50600-2-2:2014 INFORMATION TECHNOLOGY - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 2-2: POWER DISTRIBUTION
    I.S. EN 60027-2:2007 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
    I.S. EN 61967-8:2011 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS - PART 8: MEASUREMENT OF RADIATED EMISSIONS - IC STRIPLINE METHOD (IEC 61967-8:2011 (EQV))
    I.S. EN 62310-1:2005 STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
    NBR IEC 60694 : 2006 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR (IEC 62271-1:2017)
    EN IEC 62933-1 : 2018 ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 1: VOCABULARY (IEC 62933-1:2018)
    BS EN 50563 : 2011 EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES
    I.S. EN 62132-2:2011 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 2: MEASUREMENT OF RADIATED IMMUNITY - TEM CELL AND WIDEBAND TEM CELL METHOD
    CEI EN 50564 : 2013 ELECTRICAL AND ELECTRONIC HOUSEHOLD AND OFFICE EQUIPMENT - MEASUREMENT OF LOW POWER CONSUMPTION
    I.S. EN 61000-3-2:2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    CEI EN 60375 : 2005 CONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS
    CEI EN 60349-1 : 2012 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
    I.S. EN 61724-1:2017 PHOTOVOLTAIC SYSTEM PERFORMANCE - PART 1: MONITORING
    IEC TS 62433-1:2011 EMC IC modelling - Part 1: General modelling framework
    BS EN 61000-3-2:2014 (published 2014-09) Electromagnetic compatibility (EMC) Limits. Limits for harmonic current emissions (equipment input current 16 A per phase)
    CEI EN 62310-1 : 2006 STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
    I.S. EN 61967-5:2003 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 5: MEASUREMENT OF CONDUCTED EMISSIONS - WORKBENCH FARADAY CAGE METHOD
    I.S. EN 61557-12:2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
    BS EN 62301 : 2005 HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER
    BIS IS/IEC 62271-1 : 2007 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS
    I.S. EN 61967-2:2005 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 2: MEASUREMENT OF RADIATED EMISSIONS - TEM CELL AND WIDEBAND TEM CELL METHOD
    BS EN 50600-2-2:2014 (published 2014-04) Information technology. Data centre facilities and infrastructures Power distribution
    CEI EN 61724-1 : 1ED 2017 PHOTOVOLTAIC SYSTEM PERFORMANCE - PART 1: MONITORING
    I.S. EN 61642:1999 INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS - APPLICATION OF FILTERS AND SHUNT CAPACITORS
    CEI EN 61000-3-2 : 2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    UNI CEI EN 80000-6 : 2009 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
    VDE 0557-3 : 2001 COR 1 2004 LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: PRODUCT EMC STANDARD
    CEI EN 60146-1-1 : 2013 SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
    CEI EN 61557-12 : 2013 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
    NBR 5456 : 2010 GENERAL ELECTRICITY - TERMINOLOGY
    CEI EN 61810-7 : 2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
    NF EN 60646 : 2003 TEST METHODS FOR CRUCIBLE INDUCTION FURNACES
    I.S. EN 60146-1-1:2010 SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    IEC 61800-3:2017 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
    BS EN 61967-8:2011 (published 2011-11) Integrated circuits. Measurement of electromagnetic emissions Measurement of radiated emissions. IC stripline method
    06/30148641 DC : DRAFT SEP 2006 IEC 60050-112 ED1 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 112: QUANTITIES AND UNITS
    10/30209944 DC : 0 BS EN 62215-3 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD
    00/244020 DC : DRAFT SEP 2000 IEC 61800-3 ED.2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS PRODUCT STANDARD INCLUDING SPECIFIC TEST METHODS
    NFC 01 141 : 2004 ELECTROTECHNICAL VOCABULARY - PART 141: POLYPHASE SYSTEMS AND CIRCUITS
    I.S. EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
    HD 60027-2 : 200S1 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
    I.S. EN 60646:1999 TEST METHODS FOR CRUCIBLE INDUCTION FURNACES
    UNE-EN 60349-4:2013 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
    ISO/TS 81346-3:2012 Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 3: Application rules for a reference designation system
    ISO/TS 16952-1:2006 Technical product documentation Reference designation system Part 1: General application rules
    I.S. EN 60027-4:2007 LETTER SYMBOLS TO BE USED IN ELECTRIC TECHNOLOGY - PART 4: ROTATING ELECTRIC MACHINES
    IEC TR 61000-1-7:2016 Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal conditions
    IEC 60194:2015 Printed board design, manufacture and assembly - Terms and definitions
    IEC 60050-112:2010 International Electrotechnical Vocabulary (IEV) - Part 112: Quantities and units
    I.S. EN 60909-0:2016 SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS
    I.S. EN 62301:2005 HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER
    IEC 61204-3:2016 Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
    IEC 60050-141:2004 International Electrotechnical Vocabulary (IEV) - Part 141: Polyphase systems and circuits
    IEC 60909:1988 Short-circuit current calculation in three-phase a.c. systems
    IEC 62301:2011 Household electrical appliances - Measurement of standby power
    IEC 60050-521:2002 International Electrotechnical Vocabulary (IEV) - Part 521: Semiconductor devices and integrated circuits
    IEC TS 61968-2:2011 Application integration at electric utilities - System interfaces for distribution management - Part 2: Glossary
    IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
    IEC 61967-5:2003 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 5: Measurement of conducted emissions - Workbench Faraday Cage method
    IEC 60050-113:2011 International Electrotechnical Vocabulary (IEV) - Part 113: Physics for electrotechnology
    I.S. EN 1330-1:2014&LC:2015 NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS
    I.S. EN 62040-3:2011 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
    I.S. EN 62040-1:2008 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008 (EQV))
    EN 62040-1:2008/A1:2013 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008/A1:2013)
    EN 61800-3 : 2004 AMD 1 2012 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
    09/30162904 DC : 0 BS EN 61204-3 - LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    IEC 61810-7:2006 Electromechanical elementary relays - Part 7: Test and measurement procedures
    UNE-EN 1330-1:2015 Non destructive testing - Terminology - Part 1: List of general terms
    BS PD6535(1993) : 1993 GUIDE TO COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT FOR PROTECTION AGAINST ELECTRIC SHOCK
    IEC 61967-2:2005 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 2: Measurement of radiated emissions - TEM cell and wideband TEM cell method
    12/30264905 DC : 0 BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
    IEC 60349-2:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
    09/30205023 DC : 0 BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
    UNE-EN 61140:2017 Protection against electric shock - Common aspects for installation and equipment
    IEC 60139:2000 Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges
    IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
    IEC 61967-8:2011 Integrated circuits - Measurement of electromagnetic emissions - Part 8: Measurement of radiated emissions - IC stripline method
    BS EN 1330-1 : 2014 NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS
    IEC 80000-6:2008 Quantities and units - Part 6: Electromagnetism
    BS EN 61140 : 2002 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
    14/30315309 DC : 0 BS EN 61204-3 - LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
    IEC 60027-4:2006 Letter symbols to be used in electrical technology - Part 4: Rotating electric machines
    IEC 61747-1:1998+AMD1:2003 CSV Liquid crystal and solid-state display devices - Part 1: Generic specification
    IEC 60646:1992 Test methods for crucible induction furnaces
    IEC 60404-8-6:2016 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
    IEC 60146-1-1:2009 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
    IEC 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
    IEC 62520:2011 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
    IEC 60349-4:2012 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
    IEC 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
    UNE-EN 60349-1:2011 Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic converter-fed alternating current motors
    IEC 60027-7:2010 Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution
    IEC 62132-2:2010 Integrated circuits - Measurement of electromagnetic immunity - Part 2: Measurement of radiated immunity - TEM cell and wideband TEM cell method
    IEC 62132-5:2005 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 5: Workbench Faraday cage method
    IEC 60027-2:2005 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
    EN 50600-2-2 : 2014 INFORMATION TECHNOLOGY - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 2-2: POWER DISTRIBUTION
    EN 60909-0:2016 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
    EN 60694:1996/A2:2001 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    EN 62132-2 : 2011 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 2: MEASUREMENT OF RADIATED IMMUNITY - TEM CELL AND WIDEBAND TEM CELL METHOD
    IEC 61204-3:2016 RLV Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
    EN 61642 : 1997 INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS - APPLICATION OF FILTERS AND SHUNT CAPACITORS
    EN 61967-5 : 2003 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 5: MEASUREMENT OF CONDUCTED EMISSIONS - WORKBENCH FARADAY CAGE METHOD
    EN 61967-2 : 2005 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 2: MEASUREMENT OF RADIATED EMISSIONS - TEM CELL AND WIDEBAND TEM CELL METHOD
    EN 50564 : 2011 ELECTRICAL AND ELECTRONIC HOUSEHOLD AND OFFICE EQUIPMENT - MEASUREMENT OF LOW POWER CONSUMPTION
    EN 60027-2 : 2007 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
    EN 60404-8-6:2017 MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS (IEC 60404-8-6:2016)
    EN 80000-6 : 2008 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
    EN 61140:2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT (IEC 61140:2016)
    EN 61557-12 : 2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
    EN 60349-4 : 2013 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
    EN 60027-7 : 2010 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
    EN 50563:2011/A1:2013 EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES
    EN 62301 : 2005 HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER
    EN 60146-1-1:2010 SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
    EN 62310-1 : 2005 STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
    EN 62132-5 : 2006 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY, 150 KHZ TO 1 GHZ - PART 5: WORKBENCH FARADAY CAGE METHOD
    EN 61810-7 : 2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
    EN 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
    EN 61000-3-2:2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) (IEC 61000-3-2:2014)
    EN 60375 : 2003 CONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS
    EN 60139 : 2001 PREPARATION OF OUTLINE DRAWINGS FOR CATHODE-RAY TUBES, THEIR COMPONENTS, CONNECTIONS AND GAUGES
    EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
    EN 60646 : 1998 TEST METHODS FOR CRUCIBLE INDUCTION FURNACES
    EN 61204-3 : 2000 LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3 ELECTROMAGNETIC (IEC 61204-3:2000)
    EN 61967-8 : 2011 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS - PART 8: MEASUREMENT OF RADIATED EMISSIONS - IC STRIPLINE METHOD
    EN 60027-4 : 2007 LETTER SYMBOLS TO BE USED IN ELECTRIC TECHNOLOGY - PART 4: ROTATING ELECTRIC MACHINES
    EN 62520 : 2011 RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS (LIM) FED BY POWER CONVERTERS
    EN 1330-1:2014 NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60050-702:1992 International Electrotechnical Vocabulary (IEV) - Part 702: Oscillations, signals and related devices
    SA/SNZ TS 62446.3:2020 Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance Photovoltaic modules and plants - Outdoor infrared thermography (IEC TS 62446-3:2017, MOD)
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    IEC 60027-1:1992 Letters symbols to be used in electrical technology - Part 1: General
    IEC 60050-101:1998 International Electrotechnical Vocabulary (IEV) - Part 101: Mathematics
    AS/NZS 61724.1:2020 Photovoltaic system performance Monitoring (IEC 61724-1:2017, MOD)
    IEC 60050-726:1982 International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides
    IEC 60050-121:1998 International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism
    IEC 60027-2:2005 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
    IEC 60050-111:1996 International Electrotechnical Vocabulary (IEV) - Part 111: Physics and chemistry
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective