DIN ISO 23529:2012-10
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS (ISO 23529:2010)
Hardcopy , PDF
28-10-2020
English, German
01-10-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Nationales Vorwort
Nationaler Anhang NA (informativ) Literaturhinweise
1 Anwendungsbereich
2 Identifikation und Berichtswesen
3 Standard-Laborbedingungen
3.1 Standard-Labortemperatur
3.2 Standard-Luftfeuchtigkeit im Labor
3.3 Weitere Bedingungen
4 Lagerung von Mustern und Probekörpern
5 Herstellung von Probekörpern
5.1 Probekörperdicke
5.2 Einstellen der Dicke
5.3 Probekörper-Schneidgeräte
5.4 Wartung der Schneidvorrichtungen
5.5 Herstellung von Probekörpern durch Heizen
6 Konditionierung
6.1 Allgemeines
6.2 Konditionierungsdauer für niedere oder erhöhte
Temperaturen
7 Messung der Probekörpermasse
7.1 Verfahren A - Für Masse < 30 mm
7.2 Verfahren B - Für Masse => 30 mm und <= 100 mm
7.3 Verfahren C - Für Masse > 100 mm
7.4 Verfahren D - Berührungsloses Verfahren
8 Versuchsbedingungen
8.1 Dauer des Versuchs
8.2 Temperatur und Feuchtigkeit
9 Prüfkammern
9.1 Allgemeine Bestimmungen für temperaturkontrollierte
Kammern
9.2 Kammern für die Messung bei erhöhten Temperaturen
9.3 Kammern für die Messung bei niederen Temperaturen
10 Prüfbericht
Anhang A (normativ) Heizzeiten für Probekörper aus Elastomer
This standard is included in DIN Handbook 479.
| Committee |
TC 45
|
| DevelopmentNote |
Supersedes DIN 53534, DIN ISO 471 and DIN ISO 4661-1. (01/2007)
|
| DocumentType |
Test Method
|
| Pages |
20
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| ISO 23529:2016 | Identical |
| ISO 23529:2010 | Identical |
| DIN ISO 4649:2014-03 | Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010) |
| DIN ISO 27588:2014-12 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE (ISO 27588:2012) |
| DIN 45673-1:2010-08 | Mechanical vibration - Resilient elements used in railway tracks - Part 1: Terms and definitions, classification, test procedures |
| DIN HDBK 479 : 2ED 2017 | KAUTSCHUK UND ELASTOMERE - PHYSIKALISCHE UND CHEMISCHE PRUEFVERFAHREN |
| DIN ISO 13226:2015-12 | Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011) |
| DIN EN ISO 16012:2016-02 | PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015) |
| DIN EN ISO 3821:2016-10 (Draft) | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| DIN ISO 132:2015-06 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF FLEX CRACKING AND CRACK GROWTH (DE MATTIA) (ISO 132:2011) |
| DIN EN ISO 10619-1:2012-03 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2011) |
| DIN EN ISO 3386-1:2015-10 | POLYMERIC MATERIALS, CELLULAR FLEXIBLE - DETERMINATION OF STRESS-STRAIN CHARACTERISTICS IN COMPRESSION - PART 1: LOW-DENSITY MATERIALS (ISO 3386-1:1986 + AMD 1:2010) |
| DIN EN 853:2016-09 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| DIN 53579:2015-04 | TESTING OF FLEXIBLE CELLULAR MATERIALS - INDENTATION TEST ON FINISHED PARTS |
| DIN 7795:2015-02 | Measuring compression set of elastomers in hot water |
| DIN EN ISO 10619-2:2012-03 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES (ISO 10619-2:2011) |
| DIN EN ISO 7233:2015-10 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016) |
| DIN EN ISO 1402:2010-04 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
| DIN EN 13832-1:2006-11 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
| DIN ISO 815-2:2016-09 | Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2014) |
| DIN ISO 812:2015-06 | Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2011) |
| DIN ISO 1827:2010-07 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS |
| DIN ISO 2285:2013-12 | Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2013) |
| DIN EN ISO 30013:2012-03 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| DIN EN ISO 8029:2014-12 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
| DIN ISO 34-1:2016-09 | Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (ISO 34-1:2015) |
| DIN EN ISO 6808:2014-10 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
| DIN EN ISO 14113:2014-02 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| DIN EN 455-2:2015-07 | Medical gloves for single use - Part 2: Requirements and testing for physical properties |
| DIN EN ISO 3994:2015-11 | PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
| DIN EN 856:2016-09 | RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN ISO 48:2016-09 | Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010) |
| DIN EN ISO 7326:2015-10 (Draft) | RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016) |
| DIN ISO 7743:2016-08 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011) |
| DIN ISO 815-1:2016-09 | Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures (ISO 815-1:2014) |
| DIN EN ISO 2439:2009-05 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
| DIN ISO 3384-1:2015-12 | Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013) |
| DIN EN ISO 10619-3:2012-03 | Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
| DIN EN ISO 8307:2008-03 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND |
| DIN EN 857:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| DIN EN 854:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| ISO 525:2013 | Bonded abrasive products General requirements |
| DIN ISO 3302-1:2016-10 (Draft) | RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES |
| ISO 3302-1:2014 | Rubber — Tolerances for products — Part 1: Dimensional tolerances |
| DIN ISO 525:2015-02 | Bonded abrasive products - General requirements (ISO 525:2013) |
| ISO 2393:2014 | Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.