DIN VDE 0116 : 1989
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRICAL EQUIPMENT OF FURNACES
Superseded date
01-03-2005
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
1 Anwendungsbereich
2 Begriffe
3 Schaltungsunterlagen
4 Elektrische Betriebsmittel
4.1 Allgemeine Anforderungen
4.2 Schutz gegen äussere Einwirkungen
4.3 Elektrische Betriebsbedingungen
4.4 Kriech- und Luftstrecken
4.5 Motoren
4.6 Transformatoren
4.7 Schaltgeräte
4.8 Befehlsgeräte und Stellglieder
4.9 Heizungen
5 Schutzmassnahmen
5.1 Schutz gegen direktes Berühren
5.2 Schutz bei indirektem Berühren
6 Einrichtungen zum Freischalten
7 Gefahrenschalter bzw. Hauptschalter
8 Hilfsstromkreise und Sicherheitseinrichtungen
8.1 Speisung von Hilfsstromkreisen
8.2 Spannung von Hilfsstromkreisen
8.3 Erden von Hilfsstromkreisen
8.4 Massnahmen gegen Gefahren durch Körper- oder Erdschlüsse
8.5 Einfluss von Kapazitäten und Ableitwiderstände
8.6 Kurzschlussschutz von Hilfsstromkreisen
8.7 Zusatzanforderungen für die Ausführung von
Sicherheitseinrichtungen
9 Kabel und Leitungen
10 Netz- und Geräteanschluss
Zitierte Normen und andere Unterlagen
Frühere Ausgaben
Änderungen
Erläuterungen
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| VDE 0116 : 1989 | Identical |
| DIN 4751-2:1994-10 | MEDIUM TEMPERATURE HOT WATER SYSTEMS (MTHWS) WITH A BOILER FLOW TEMPERATURE UP TO 120 DEG C - SPECIFICATION FOR SEALED SYSTEMS USING THERMOSTATIC CONTROL - SAFETY EQUIPMENT |
| DIN 4751-1:1994-10 | MEDIUM TEMPERATURE HOT WATER SYSTEMS (MTHWS) WITH A BOILER FLOW TEMPERATURE UP TO 120 DEGREE C - SPECIFICATION FOR OPEN SYSTEMS AND SEALED SYSTEMS WITH PRESSURISATION BY GRAVITY USING A COLUMN OF WATER OR BY SAFETY VALVES - SAFETY EQUIPMENT |
| VDE 0118-1 : 2010 | ERRICHTEN ELEKTRISCHER ANLAGEN IM BERGBAU UNTER TAGE - TEIL 1: ALLGEMEINE FESTLEGUNGEN |
| DIN V VDE 0801 : 1990 AMD 1 1994 | PRINCIPLES FOR COMPUTERS IN SAFETY-RELATED SYSTEMS |
| DIN 4788-2:1990-02 | FAN-ASSISTED GASBURNERS; TERMINOLOGY, SAFETY REQUIREMENTS, TESTING, MARKING |
| DIN 4751-3:1993-02 | MEDIUM TEMPERATURE HOT WATER SYSTEMS (MTHWS) WITH A BOILER FLOW TEMPERATURE UP TO 95 DEGREE C AND FORCED FLOW BOILERS WITH RATED OUTPUT UP TO 50 KW - SPECIFICATION FOR SEALED SYSTEMS USING THERMOSTATIC CONTROL - SAFETY EQUIPMENT |
| DIN 3391:1996-11 | VALVES AND MULTIFUNCTIONAL CONTROLS FOR GASEOUS COMBUSTIBLES; SAFETY REQUIREMENTS OF GENERAL NATURE |
| DIN 32728:1981-02 | FILLING CONTROLS - LOW FLUID CUT OFF (CONTROL) FOR HEAT TRANSFER INSTALLATIONS WITH ORGANIC FLUIDS - SAFETY REQUIREMENTS AND TEST |
| DIN 4787-2:1981-09 | ATOMIZING OIL BURNERS; FLAME MONITORING DEVICES; FLAME DETECTORS AND AUTOMATIC FIRING UNITS; SAFETY REQUIREMENTS, TESTING, MARKING |
| VDTUEV 100-2 WASSERSTAND : 1985 | WASSERSTAND - ANFORDERUNGEN AN WASSERSTANDBEGRENZER FUER WAERMEERZEUGUNGSANLAGEN MIT VORLAUFTEMPERATUREN BIS 120 GRAD C |
| DIN 40802-2:1976-02 | METAL-CLAD BASE MATERIAL FOR PRINTED CIRCUITS; SPECIFICATIONS |
| DIN 42570-1:1973-03 | IGNITION TRANSFORMERS FOR OIL AND GAS BURNERS; ELECTRICAL DATA |
| DIN VDE 0110-2 : 1989 | ISOLATIONSKOORDINATION FUER ELEKTRISCHE BETRIEBSMITTEL IN NIEDERSPANNUNGSANLAGEN; BEMESSUNG DER LUFT- UND KRIECHSTRECKEN |
| DIN VDE 0110-1 : 1997 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
| DIN 40008-6:1985-02 | ELECTRICAL ENGINEERING; SAFETY SIGNS; INFORMATION PLATES |
| DIN 32727:1981-02 | FLOW SWITCHES FOR HEAT TRANSFER INSTALLATIONS - SAFETY REQUIREMENTS AND TEST |
| TRD 413 : 1996 | PULVERIZED COAL FIRING SYSTEMS ON STEAM BOILERS |
| DIN 4788-1:1977-06 | GAS BURNERS WITHOUT VENTILATION (ATMOSPHERIC GAS BURNERS) |
| VDTUEV 100/1 DRUCK : 1983 | DRUCK - ANFORDERUNGEN AN DRUCKWAECHTER UND DRUCKBEGRENZER FUER DAMPFKESSEL |
| DIN VDE 0550-3 : 1969 | SPECIFICATIONS FOR SMALL TRANSFORMERS - PART 3: PARTICULAR REQUIREMENTS FOR ISOLATING AND CONTROL TRANSFORMERS AS WELL AS FOR MAINS-SUPPLY AND INSULATING TRANSFORMERS ABOVE 1000 V |
| DIN 40050:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER |
| DIN VDE 0253 : 1987 | HEATING CABLES |
| DIN 3398-1:1992-01 | PRESSURE SWITCHES FOR GAS - SAFETY REQUIREMENTS, TESTING |
| DIN IEC 60770:1986-03 | METHODS OF EVALUATING THE PERFORMANCE OF TRANSMITTERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS |
| DIN 1952:1982-07 | MEASUREMENT OF FLUID FLOW BY MEANS OF ORIFICE PLATES, NOZZLES AND VENTURI TUBES INSERTED IN CIRCULAR CROSS SECTION CONDUITS RUNNING FULL (VDI RULES FOR MEASUREMENT OF FLUID) |
| DIN IEC 60326-3:1993-09 | PRINTED BOARDS - PART 3: DESIGN AND USE OF PRINTED BOARDS |
| DIN 44052:1983-09 | RESISTORS, FIXED, LACQUERED, CRACKED CARBON FILM, HIGH STABILITY, WITH AXIAL LEADS |
| DIN VDE 0660-107 : 1992 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS |
| DIN VDE 0660-102 : 1992 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| DIN VDE 0100-540 : 2012-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS (IEC 60364-5-54:2011) |
| DIN 32730:1993-09 | VALVES WITH A SAFETY FUNCTION FOR WATER AND STEAM IN HEATING SYSTEMS - SAFETY REQUIREMENTS AND TESTING |
| DIN 32731 : 1984 | TEMPERATURE CONTROL DEVICES WITH MECHANICALLY ACTUATED INTEGRAL CLOSURE GAS VALVE WITHOUT ELECTRICAL AUXILIARY ENERGY |
| DIN 4788-3:1989-04 | GASBURNERS - AUTOMATIC SEQUENCE CONTROL - FLAME CONTROL DEVICES - CONCEPTS, SAFETY REQUIREMENTS, TESTING MARKING |
| DIN 30600:1985-11 | GRAPHICAL SYMBOLS - REGISTRATION, DESIGNATION |
| DIN VDE 0106-1 : 1982 | CLASSIFICATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT PROTECTION AGAINST ELECTRIC SHOCK |
| DIN 44063:1983-09 | RESISTORS, FIXED, INSULATED, METAL-OXIDE FILM, HIGH STABILITY, WITH AXIAL LEADS |
| DIN VDE 0660-104 : 1982 | |
| DIN 3258-1:1971-02 | FLAME CONTROL FOR GAS APPLIANCES - SAFETY-PILOTS |
| DIN 3394-1:2004-05 | AUTOMATIC CONTROL VALVES - PART 1: PRESSURE RELIEF, SAFETY AND REGULATING VALVES FOR PRESSURE ABOVE 4 BAR UP TO 16 BAR |
| TRD 414 : 1996 | WOOD FIRING SYSTEMS ON STEAM BOILERS |
| DIN VDE 0101 : 2000 | POWER INSTALLATIONS EXCEEDING 1 KV |
| DIN 44061:1983-09 | RESISTORS, FIXED, LACQUERED, METAL FILM, HIGH STABILITY WITH LOW TEMPERATURE COEFFICIENT - WITH AXIAL LEADS |
| DIN VDE 0620 : 1992 | PLUGS AND SOCKET-OUTLETS UP TO 400 V 25 A |
| DIN 3398-2:1992-01 | PRESSURE SWITCHES FOR AIR AND FLUE GASES FOR FURNACE SYSTEMS - SAFETY REQUIREMENTS, TESTING |
| DIN VDE 0804 : 1989 AMD 1 1992 | TELECOMMUNICATIONS - ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
| DIN VDE 0472-804 : 1989 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS - BURNING BEHAVIOUR |
| DIN 3393-1:1973-01 | COMBINATIONS OF CONTROLS FOR GAS APPLIANCES - COMBINATIONS |
| DIN 4736-1:1991-04 | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS; COMPONENT PARTS, OILPUMPS, CONTROLS AND TANKS, TECHNICAL SAFETY REQUIREMENTS AND TESTS |
| DIN 3394-2:1973-08 | SELF ADJUSTING VALVES OPERATED ON AUXILIARY ENERGY - REGULATING DEVICE WITH OR WITHOUT SHUTTING-OFF (ZERO-SHUT-OFF), CLASS R[M] AND R[O] |
| DIN 40110:1975-10 | QUANTITIES USED IN ALTERNATING CURRENT THEORY |
| DIN 19226:1968-05 | CONTROL ENGINEERING - DEFINITIONS AND TERMS |
| DIN 4788-2:1990-02 | FAN-ASSISTED GASBURNERS; TERMINOLOGY, SAFETY REQUIREMENTS, TESTING, MARKING |
| TRD 411 : 1997 | OIL FIRING SYSTEMS ON STEAM BOILERS |
| DIN 3446:1983-08 | ELECTRIC IGNITION DEVICES FOR GAS BURNERS |
| DIN 49441:1972-06 | TWO-POLE PLUGS WITH EARTHING-CONTACT 10 A 250 V APPROX OR EQUALS TO AND 10 A 250 V, 16 A 250 V |
| DIN 40008-3:1985-02 | ELECTRICAL ENGINEERING; SAFETY SIGNS; WARNING PLATES AND SUPPLEMENTARY PLATE |
| DIN 4787-1:1981-09 | ATOMIZING OIL BURNERS - DEFINITIONS, SAFETY REQUIREMENTS, TESTING, MARKING |
| DIN 89150:1979-08 | CABLES AND FLEXIBLE CORDS FOR INSTALLATION ON SHIPS; SURVEY, CURRENT RATING, OVERCURRENT PROTECTION, DIRECTION FOR LAYING |
| DIN VDE 0660-101 : 1992 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT BREAKERS |
| DIN 3258-2:1988-07 | FLAME SUPERVISION ON GAS APPLIANCES - AUTOMATIC FLAME SUPERVISION DEVICES - SAFETY REQUIREMENTS AND TESTING |
| DIN 32725-1 : 1980 | SAFETY SHUT-OFF DEVICES FOR COMBUSTION PLANTS WITH LIQUID FUELS AND LIQUIFIED GAS IN ITS LIQUID FORM - SAFETY REQUIREMENTS AND TEST |
| TRD 412 : 1998 | GAS FIRING SYSTEMS OF STEAM BOILERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.