DIN VDE 0616-3 : 1992
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS
22-10-2017
12-01-2013
Vorwort
Abschnitt
1 Allgemeines
1.1 Anwendungsbereich
1.2 Zitierte Normen
2 Begriffe
3 Allgemeine Anforderung
4 Allgemeine Prüfanforderungen
5 Elektrische Bemessungswerte
6 Einteilung
7 Aufschriften
8 Schutz gegen elektrischen Schlag
9 Klemmen
10 Aufbau
11 Schutz gegen Staub und Wasser
12 Isolationswiderstand und Spannungsfestigkeit
13 Arbeitsweise
14 Mechanische Festigkeit
15 Schrauben, stromführende Teile und Verbindungen
16 Kriech- und Luftstrecken
17 Beständigkeit gegen Wärme, Feuer und Kriechstrom
18 Beständigkeit gegen Spannungs-Korrosion und Rosten
Bilder
Anhang A (normativ) Liste der Lampenfassungen im
Anwendungsbereich dieser Norm
Anhang B (normativ) Prüfung auf Spannungsriss-Korrosion
Anhang ZA (normativ) Andere in dieser Norm zitierte
internationale Normen
Diese Norm enthält technische und massliche Anforderungen an Fassungen für röhrenförmige Leuchtstofflampen und an Starterfassungen sowie die zur Feststellung der Sicherheit und des Sitzes der Lampen in den Lampenfassungen und der Starter in den Starterfassungen anzuwendenden Prüfverfahren. Sie umfasst unabhängige Lampenfassungen und Einbau-Lampenfassungen für röhrenförmige Leuchtstofflampen mit Sockeln nach Anhang A sowie unabhängige Starterfassungen und Einbau-Starterfassungen für Starter nach IEC 155 zur Verwendung in Wechselstromkreisen, deren Betriebsspannung 1000 V Effektivwert nicht überschreitet. Sie umfasst auch Lampenfassungen für einseitig gesockelte Leuchtstoff lampen, die mit einem Mantel und Fassungsdom ähnlich einer Fassung mit Edisongewinde versehen sind (z. B. für G23 und G24 gesockelte Lampen). Solche Lampenfassungen müssen zusätzlich nach den folgenden Abschnitten der IEC 238 (EN 60238) geprüft werden: 8.4, 8.5, 8.6, 9.3, 10.7, 11, 12.2, 12.5, 12.6, 12.7, 13, 15.3, 15.4, 15.5 und 15.9.) Lampenfassungen mit einem Aussengewinde für Schirmträgerringe müssen der neuesten Ausgabe der IEC 399 entsprechen. Soweit anwendbar, umfasst diese Norm auch Kombinationen von Lampen- und Starterfassungen sowie Fassungen oder Kombinationen, welche ganz oder teilweise Bestandteil der Leuchte sind. Sie sind sinngemäss ebenfalls anwendbar für andere Fassungen als die Arten, die oben ausdrücklich erwähnt sind, sowie für Lampen-Anschlusselemente. Wo in dieser Norm 'Fassungen' steht, sind beide - Lampenfassungen und Starterfassungen - gemeint.
DocumentType |
Standard
|
PublisherName |
Verband Deutscher Elektrotechniker
|
Status |
Withdrawn
|
Standards | Relationship |
EN 60400:2017 | Identical |
DIN VDE 0712-101 : 1990 | STARTERS FOR TUBULAR FLUORESCENT LAMPS |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
DIN 40052:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF SOLID FOREIGN BODIES, DUST CHAMBER |
HD 323.2.20 : 200S3 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING |
IEC 60238:2016+AMD1:2017 CSV | Edison screw lampholders |
IEC 60061-3:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
DIN 49768:1986-10 | MOUNTING DISTANCE FOR A COMBINED PAIR OF INFLEXIBLE G5 LAMPHOLDERS |
IEC 60695-2-1:1991 | Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance |
DIN 49642-14:1989-12 | |
HD 214 : 200S2 | RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
EN 60238 : 2004 AMD 2 2011 | EDISON SCREW LAMPHOLDERS (IEC 60238:2004/A2:2011) |
DIN 49769:1986-10 | MOUNTING DISTANCE FOR A COMBINED PAIR OF INFLEXIBLE G13 LAMPHOLDERS |
DIN IEC 60068-2-20:1991-04 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST T: SOLDERING |
DIN EN 60081:2014-09 | DOUBLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60081:1997 + A1:2000, MODIFIED + A2:2003 + A3:2005 + A4:2010 + A5:2013) |
IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
DIN 49646-22:1989-12 | IEC GAUGES FOR LAMPHOLDERS; "D" SINGLE PIN GAUGE FOR CHECKING MAXIMUM WITHDRAWAL FORCE FROM CONTACTS IN 2G11, G23, GX23, TYPES G24D, G24Q, GY24D, G32D, G32Q, GX32D & GY32D |
DIN 49646-29:1987-10 | IEC GAUGES FOR LAMPHOLDERS; PLUG GAUGES " B " FOR CHECKING MAXIMUM INSERTION FORCE IN G23 LAMPHOLDERS |
DIN 40050:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER |
DIN VDE 0711-1 : 1991 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
DIN VDE 0470-1 : 1992 | |
DIN 49646-6:1985-04 | IEC LAMPHOLDER GAUGES; GAUGE FOR MOUNTED LAMPHOLDERS G5 FOR TESTING CONTACT |
HD 65.2 : 200S1 | LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - LAMPHOLDERS |
DIN 40053-4:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, JET NOZZLE |
DIN 40200:1981-10 | NOMINAL VALUE, LIMITING VALUE, RATED VALUE, RATING - CONCEPTS |
IEC 60061-2:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
VDE 0303-1 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
DIN 49646-23:1989-12 | IEC GAUGES FOR LAMPHOLDERS; "E" SINGLE PIN GAUGE FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN 2G11, G23, GX23, TYPES G24D, G24Q, GY24D, G32D, G32Q, GX32D, GY32D LAMPHOLDERS |
DIN 40010:1990-08 | ELECTRICAL ENGINEERING; VDE TEST MARKS; MARKING ON ELECTRICAL EQUIPMENT |
DIN VDE 0712-101 : 1990 | STARTERS FOR TUBULAR FLUORESCENT LAMPS |
DIN 49646-7:1985-04 | IEC LAMPHOLDER GAUGES; GAUGE FOR MOUNTED LAMPHOLDERS G13 FOR TESTING CONTACT |
IEC 60399:2004+AMD1:2008 CSV | Barrel thread for lampholders with shade holder ring |
IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
DIN IEC 60352-1:1987-05 | SOLDERLESS CONNECTIONS; SOLDERLESS WRAPPED CONNECTIONS; GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
DIN 49646-4:1985-04 | IEC LAMPHOLDER GAUGES; " GO " GAUGES FOR THE MOUNTING DISTANCES OF A COMBINED PAIR OF LAMPHOLDERS G5 |
DIN 49646-30:1987-10 | IEC GAUGES FOR LAMPHOLDERS; PLUG GAUGES " C " FOR CHECKING MINIMUM RETENTION FORCE IN G23 LAMPHOLDERS |
DIN 49658:1987-04 | IEC LAMPHOLDERS; LAMPHOLDER FA6 |
DIN 49646-28:1987-10 | IEC GAUGES FOR LAMPHOLDERS; PLUG GAUGES " A " FOR CHECKING MAXIMUM INSERTION FORCE & MAXIMUM WITHDRAWAL FORCE IN G23 LAMPHOLDERS |
HD 444.2.2 : 200S2 | FIRE HAZARD TESTING - TEST METHODS - NEEDLE-FLAME TEST |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
DIN 49642-16:1987-10 | IEC LAMPHOLDERS; G23 LAMPHOLDER |
DIN 49642-13:1990-12 | |
IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
HD 365 : 200S3 | CLASSIFICATION OF DEGREES OF PROTECTION PROVIDED BY ENCLOSURES |
HD 222 : 200S1 | STANDARD SHEETS FOR BARREL THREAD FOR E14 AND E27 LAMPHOLDERS WITH SHADE HOLDER RING |
EN 60155:1995/A2:2007 | GLOW-STARTERS FOR FLUORESCENT LAMPS |
DIN VDE 0100-200 : 2006-06 | LOW-VOLTAGE INSTALLATIONS - PART 200: DEFINITIONS |
HD 444.2.1 : 200S1 | FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE TEST AND GUIDANCE |
DIN 40053-1:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, DRIPPING APPARATUS |
DIN 49646-5:1985-04 | IEC LAMPHOLDER GAUGES; " GO " GAUGES FOR THE MOUNTING DISTANCES OF A COMBINED PAIR OF LAMPHOLDERS G13 |
DIN 40053-2:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, OSCILLATING TUBE |
IEC 60155:1993 | Glow-starters for fluorescent lamps |
DIN 42008-1 : 1987 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PASSIVE IGNITION (FLAMMABILITY) OF CAPACITORS - REQUIREMENTS AND TEST METHODS |
DIN 49642-24:1990-08 | IEC LAMPHOLDERS; 2G11 LAMPHOLDER |
HD 476.1 : 200S1 | SOLDERLESS CONNECTIONS - SOLDERLESS WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
DIN 40053-3:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, SPRAY NOZZLE |
DIN IEC 60112 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.