• Shopping Cart
    There are no items in your cart

EI MODEL CODE SAFE PRACTICE PT7 : 1998

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF AVIATION FUELLING FACILITIES

Withdrawn date

01-02-2004

Published date

01-01-1998

Sorry this product is not available in your region.

Foreword
Acknowledgements
1 General
   1.1 Classes of aviation fuels
   1.2 Electrical safety precautions
   1.3 Fire safety
2 Depot locations relative to airport facilities
   2.1 Methods of fuelling
   2.2 Depot location
   2.3 Restrictions on airports
3 Depot layout
   3.1 General
   3.2 Depots located outside a controlled area
   3.3 Depots located within a controlled area
   3.4 Drainage and oil/water separators
   3.5 Lighting
4 Depot plant, fixed equipment and buildings
   4.1 General
   4.2 Tankage
   4.3 Pipework
   4.4 Pumps
   4.5 Filtration
   4.6 Fueller loading
   4.7 Container filling
   4.8 Pumping operations - precautions against static
         electricity
5 Fuel hydrant systems
   5.1 General
   5.2 System design considerations
   5.3 Pipes and fittings
   5.4 Hydrant pits
   5.5 Hydrant pit valves
   5.6 Testing the pipeline system
   5.7 Emergency shut down (ESD) controls
   5.8 Commissioning the system
   5.9 Inspection of pit valves and risers after impact
   5.10 Hydrant pump control system
6 Mobile fuelling equipment
   6.1 General
   6.2 Mobile fuelling equipment
   6.3 Mobile fuelling equipment for lubricants and
         special products other than aviation fuels
   6.4 Grade identification
7 Fuelling hoses and hose assemblies
   7.1 General
   7.2 Hoses
   7.3 Hose couplings
   7.4 Hose inspection and test procedure
8 Equipment testing
   8.1 General
   8.2 Pressure control equipment
   8.3 Hose inspection and test procedure
   8.4 Bulk meter proving
9 Airport operations and maintenance
   9.1 General
   9.2 Airport operating procedures
   9.3 Maintenance procedures for fuel depots and mobile
         equipment
10 Health, safety, environment and security
   10.1 Hygiene precautions
   10.2 First aid
   10.3 Health hazards
   10.4 Personal protective clothing and equipment
   10.5 Breathing apparatus
   10.6 Permit to work system
   10.7 Facilities
   10.8 Security
   10.9 Protecting the environment
11 Fire protection and emergency procedures
   11.1 General
   11.2 Apron spillages
   11.3 Fire precautions and equipment
12 Training
   12.1 Importance of training
   12.2 Personnel to be trained
   12.3 Training subjects
   12.4 Emergency procedures
   12.5 Instruction manuals
13 Retail or consumer fuelling facilities
   13.1 General
   13.2 Types of aviation fuel
   13.3 Depot/airfield facilities
   13.4 Mobile fuelling equipment
   13.5 Hoses and hose assemblies
   13.6 Equipment testing
   13.7 Operations and maintenance
   13.8 Health, safety, environment and security
   13.9 Fire protection and emergency procedures
   13.10 Training
Annex A - Glossary
Annex B-1 - Standards relevant to aircraft fuelling
            facilities
Annex B-2 - Standards applicable to sections within this
            publication
Annex C - List of abbreviations
Annex D - Classifications of petroleum products
Annex E - Guidelines for testing the tightness integrity
            of aviation fuel hydrant systems
Annex F - Model recertification test report form

Provides guidance on safe practice in the siting, layout, design, construction and operation of aircraft fuelling facilities and associated equipment at airports and airfields located anywhere in the world.

DocumentType
Standard
PublisherName
Energy Institute (formerly Institute of Petroleum - IP)
Status
Withdrawn

API 1543 : 2009 DOCUMENTATION, MONITORING AND LABORATORY TESTING OF AVIATION FUEL DURING SHIPMENT FROM REFINERY TO AIRPORT

EN 418 : 1992 SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
API 500 : 2012 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
EEMUA 107 : 1992 RECOMMENDATIONS FOR THE PROTECTION OF DIESEL ENGINES FOR USE IN ZONE 2 HAZARDOUS AREAS
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
BS 1640-3:1968 Specification for steel butt-welding pipe fittings for the petroleum industry Wrought carbon and ferritic alloy steel fittings. Metric units
EI Model Code of Safe Practice Part 16:2017 MODEL CODE OF SAFE PRACTICE - PART 16: GUIDANCE ON TANK CLEANING
API 2000 : 2014 VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
BS 1640-2:1962 Specification for steel butt-welding pipe fittings for the petroleum industry Wrought and cast austenitic chromium-nickel steel fittings
API 653 : 2014 TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
BS 1560-3.1:1989 Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for steel flanges
ISO 102:1990 Aircraft — Gravity filling orifices
API 2003 : 2015 PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS
ISO 2883:1980 Rubber, vulcanized — Antistatic and conductive products for industrial use — Electrical resistance limits
FAA AC 150/5300-13 : 2008 AIRPORT DESIGN
EI MODEL CODE SAFE PRACTICE PT18 : 1993 PETROLEUM INDUSTRY - OCCUPATIONAL HEALTH
BS 8206-2:1992 Lighting for buildings Code of practice for daylighting
API 5L : 2012 LINE PIPE
ASTM D 910 : 2017-05 SPECIFICATION FOR LEADED AVIATION GASOLINES
NFPA 10 : 2018 PORTABLE FIRE EXTINGUISHERS
EI Model code of safe practice Part 15:2015 MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS
MIL-PRF-4556 Revision F:1998 COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS
EI MODEL CODE SAFE PRACTICE PT2 : 3ED 2013 DESIGN, CONSTRUCTION AND OPERATION OF PETROLEUM DISTRIBUTION INSTALLATIONS
EI MODEL CODE SAFE PRACTICE PT1 : 2010 THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS
API 505 : 1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
API 2001 : 2012 FIRE PROTECTION IN REFINERIES
ISO 9001:2015 Quality management systems — Requirements
BS 1640-1:1962 Specification for steel butt-welding pipe fittings for the petroleum industry Wrought carbon and ferritic alloy steel fittings
NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
NFPA 77 : 2014 STATIC ELECTRICITY
BS 1640-4:1968 Specification for steel butt-welding pipe fittings for the petroleum industry Wrought and cast austenitic chromium-nickel steel fittings. Metric units
API 650 : 2013 WELDED TANKS FOR OIL STORAGE
EI MODEL CODE SAFE PRACTICE PT19 : 2012 FIRE PRECAUTIONS AT PETROLEUM REFINERIES AND BULK STORAGE INSTALLATIONS
SAE ARP 5818 : 2015 AIRCRAFT REFUELING VEHICLE DESIGN AND PERFORMANCE REQUIREMENTS
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO 8995-1:2002 Lighting of work places Part 1: Indoor
NFPA 407 : 2017 AIRCRAFT FUEL SERVICING
NFPA 416 : 1993 CONSTRUCTION AND PROTECTION OF AIRPORT TERMINAL BUILDINGS
EI MODEL CODE SAFE PRACTICE PT21 : 3ED 2013 MODEL CODE OF SAFE PRACTICE - PART 21: GUIDELINES FOR THE CONTROL OF HAZARDS ARISING FROM STATIC ELECTRICITY
API 1615 : 2011 INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS
NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
ASTM D 4021 : 1992 Standard Specification for Glass-Fiber-Reinforced Polyester Underground Petroleum Storage Tanks (Withdrawn 1999)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.